Re: 8-CURRENT Firewire
Julian Stecklina <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.firewire |
|---|---|
| Message-ID | <[email protected]> |
Sean Bruno <[email protected]> writes: >> I have an AMD 780G board with onboard Firewire controller. 8-CURRENT >> hangs at boot with: >> >> run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config >> run_interrupt_driven_hooks: still waiting after 120 seconds for xpt_config >> ... > > Two things: > > 1. Full dmesg output from boot with the firewire enabled and disabled > would be great. Post it over on freebsd-firewire. 1.1 Hang http://os.inf.tu-dresden.de/~jsteckli/fbsd/dmesg-fw-hang-busreset.txt I got it entering multiuser by causing a bus reset, after the "run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config". 1.2 Firewire disabled http://os.inf.tu-dresden.de/~jsteckli/fbsd/dmesg-without-firewire.txt > 2. Can you boot with the firewire enabled in the BIOS and the following > in loader.conf: > firewire_load="NO" > If you can boot this way, what happens when you: > kldload sbp.ko Boots fine, but kldload says "Error: File Exists". I'll try building a kernel without sbp, if that helps. Regards, -- Julian Stecklina The day Microsoft makes something that doesn't suck is probably the day they start making vacuum cleaners - Ernst Jan Plugge _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-firewire To unsubscribe, send any mail to "freebsd-firewire-unsubscribe-h+KGxgPPiopAfugRpC6u6w@public.gmane.org"