Re: Firewire 800/400 card
Sean Bruno <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.firewire |
|---|---|
| Message-ID | <[email protected]> |
Hidetoshi Shimokawa wrote: > Do you have two (S400 only and S800) cards? > In that case you will have two devices (fwohci0 and fwohci1). > If you have only one card and have S400 and S800 ports, you will have > one device and one bus. > Output of devinfo(8) and fwcontrol -t may be helpful. > The line "fwohci0: invalid speed 7 (fixed to 3)." is expected. > > Regards, > > This is a 400/800 card: http://www.syba.com/Product/Info/Id/411 fwcontrol -t: source # fwcontrol -t crc_len: 3 generation:3 node_count:1 sid_count:1 id link gap_cnt speed delay cIRM power port0 port1 port2 ini more 00 1 5 S800 0 1 -1W - - - 1 0 Sean > On Jan 18, 2008 4:58 AM, Sean Bruno <[email protected]> wrote: > >> I'm curious, I put a 400/800 card into a FreeBSD 6 machine today and I >> assumed that I would see several different "buses" but I only see one >> according to camcontrol. Should I see one bus per port or per firewire >> controller? >> >> Also, the card I am using displays interesting output on startup, is >> this a h/w bug? >> >> >> fwohci0: <Texas Instruments TSB82AA2> mem >> 0x2a109000-0x2a1097ff,0x2a100000-0x2a103fff irq 17 at device 6.0 on pci0 >> fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0x2a109000 >> fwohci0: [MPSAFE] >> fwohci0: OHCI version 1.10 (ROM=1) >> fwohci0: No. of Isochronous channels is 4. >> fwohci0: EUI64 00:13:3b:01:00:01:00:58 >> fwohci0: invalid speed 7 (fixed to 3). >> fwohci0: Phy 1394a available S800, 3 ports. >> fwohci0: Link S800, max_rec 4096 bytes. >> firewire0: <IEEE1394(FireWire) bus> on fwohci0 >> >> >> Sean >> >> _______________________________________________ >> [email protected] mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-firewire >> To unsubscribe, send any mail to "[email protected]" >> >> >> > > > > _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-firewire To unsubscribe, send any mail to "[email protected]"