Re: [RELENG_7] SBP Drives not recognized
Sean Bruno <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.firewire |
|---|---|
| Message-ID | <[email protected]> |
Hidetoshi Shimokawa wrote: > On Thu, Jun 19, 2008 at 10:30 PM, Sean Bruno <[email protected]> wrote: > >> Sean Bruno wrote: >> >>> Hidetoshi Shimokawa wrote: >>> >>>> The log indicates that the OHCI controller didn't receive any acks >>>> from disk for probe packets. >>>> This usually indicates hardware problem. >>>> Do linux and windows work on exactly same hardware? (host machine and >>>> cable) >>>> >>>> >>>> >>> I booted up the Fedora 9 live CD on the same PC and it seems to work just >>> fine. >>> >>> This Enclosure presents two separate targets and has 400/800 capabilities: >>> http://www.newegg.com/Product/Product.aspx?Item=N82E16817716028R >>> >> I did notice that Linux does have "issues" with the enclosure. It seems to >> be timing out on LUN 0, but it recovers and deals with it. I have verified >> that I can read/write data and filesystems to both targets under Linux: >> >> firewire_core: created device fw1: GUID 0001d27ceea502b8, S400 >> > > it is recognized as a S400 device. Interesting... > > Well, I'm connecting the "400" port on the drive enclosure to a "400" port on the server. I will connect up the 800 port on the drive enclosure to an 800 port on the server in the morning. Sean _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-firewire To unsubscribe, send any mail to "[email protected]"