Re: Western Digital 1TB My Book Studio
Sean Bruno <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.firewire |
|---|---|
| Message-ID | <[email protected]> |
Stephen Bader wrote: > The drive is 400/800 compatible. They even connect to the same port on > the back of the drive. Here is a link to the drive: > > http://www.westerndigital.com/en/products/products.asp?driveid=374 > > If you need anything from me, let me know. I don't know much about > troubleshooting these things, but I can do whatever you need. > > Thanks, > > -Steve > > On Jul 14, 2008, at 6:14 PM, Sean Bruno wrote: > >> Stephen Bader wrote: >>> I am trying to connect a Western Digital 1TB My Book Studio to my >>> FreeBSD 6.2-Stable box via Firewire 400 without much luck. >>> >>> When I connect the drive via USB, it works just fine. When I connect >>> via Firewire 400, the drive is detected, but never becomes available >>> via da0. Below is the output with debug.firewire_debug=1. I have >>> connected other Firewire 400 devices to this machine without a >>> problem. I also updated the firmware on this drive to verify that is >>> not the cause of the problem. >>> >>> I should note that this drive does not actually have any Firewire >>> 400 ports on it, but instead came with a cable that is Firewire 800 >>> on one side (which connects to the drive), and Firewire 400 on the >>> other. The drive does support Firewire 400 though, and I have >>> confirmed this by connecting it to a Firewire 400 port on my Mac. >>> >>> Can someone point me in the right direction to begin troubleshooting >>> this? I am actually considering buying a PCI Firewire 800 card for >>> this box so I can get more speed, but I want to make sure it will >>> work first. >>> >>> Thanks, >>> >> Is the Drive 400/800 compatible? If so, I'm looking into a speed >> negotiation issue right now that may work for you. >> >> Sean > Thanks. I think I know what the problem is, i.e. the sbp() driver is using the MAX capable speed, not the negotiated speed. I bet, if you plug your drive into a 800 port "it just works". -- Sean Bruno MiraLink Corporation 6015 NE 80th Ave, Ste 100 Portland, OR 97218 Phone 503-621-5143 Fax 503-621-5199 MSN: [email protected] Google: [email protected] _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-firewire To unsubscribe, send any mail to "[email protected]"