No ATA disks on 9.1-RC3
Alex Keda <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.hardware |
|---|---|
| Message-ID | <[email protected]> |
begin thread: http://lists.freebsd.org/pipermail/freebsd-current/2012-November/038000.html I try update my laptop - Compaq 6715s from 9.0 to 9.1-rc3 it cannot boot, because no HDD found dmesg from 9.0/9.1 and pciconf in attached files I try rebuild kernel, with config options: nodevice ata nodevice siis device atacore device ataati device ataahci device atapci no happy - error remains _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[email protected]"
dmesg.9.0.txt
(text/plain, 8.8 KB)
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:46:30 UTC 2012
[email protected]:/usr/obj/usr/src/sys/GENERIC amd64
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-60 (1995.05-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x60f82 Family = f Model = 68 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
real memory = 4294967296 (4096 MB)
avail memory = 3953205248 (3770 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <HP 0944 >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ACPI Error: 32/64X address mismatch in Pm2ControlBlock: 0x00008800/0x0000000000008100, using 32 (20110527/tbfadt-457)
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
acpi0: reservation of 0, 8000000 (3) failed
acpi0: reservation of 100000, fff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_ec0: <Embedded Controller: GPE 0x11> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: Length mismatch for 3 range: 11ff000 vs 11fefff
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 0xc0000000-0xc7ffffff,0xd0200000-0xd020ffff,0xd0300000-0xd03fffff irq 19 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci16: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5906 A2, ASIC rev. 0x00c002> mem 0xd0000000-0xd000ffff irq 16 at device 0.0 on pci16
bge0: CHIP ID 0x0000c002; ASIC REV 0x0c; CHIP REV 0xc0; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5906 10/100baseTX media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
bge0: Ethernet address: 00:1f:29:89:38:f3
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci32: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci48: <ACPI PCI bus> on pcib4
siba_bwn0: <Broadcom BCM4312 802.11a/b/g Wireless> mem 0xc8000000-0xc8003fff irq 18 at device 0.0 on pci48
siba_bwn0: unsupported coreid (USB 1.1 Host)
bwn0 on siba_bwn0
bwn0: WLAN (chipid 0x4311 rev 13) PHY (analog 4 type 2 rev 9) RADIO (manuf 0x17f ver 0x2050 rev 2)
bwn0: DMA (64 bits)
bwn0: Using 1 MSI messages
ahci0: <ATI IXP600 AHCI SATA controller> port 0x9000-0x9007,0x9008-0x900b,0x9010-0x9017,0x5018-0x501b,0x5020-0x502f mem 0xd0409000-0xd04093ff irq 16 at device 18.0 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ohci0: <OHCI (generic) USB controller> mem 0xd0401000-0xd0401fff irq 23 at device 19.0 on pci0
usbus0: <OHCI (generic) USB controller> on ohci0
ohci1: <OHCI (generic) USB controller> mem 0xd0402000-0xd0402fff irq 17 at device 19.1 on pci0
usbus1: <OHCI (generic) USB controller> on ohci1
ohci2: <OHCI (generic) USB controller> mem 0xd0403000-0xd0403fff irq 17 at device 19.2 on pci0
usbus2: <OHCI (generic) USB controller> on ohci2
ohci3: <OHCI (generic) USB controller> mem 0xd0404000-0xd0404fff irq 17 at device 19.3 on pci0
usbus3: <OHCI (generic) USB controller> on ohci3
ohci4: <OHCI (generic) USB controller> mem 0xd0405000-0xd0405fff irq 17 at device 19.4 on pci0
usbus4: <OHCI (generic) USB controller> on ohci4
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd0406000-0xd04060ff irq 23 at device 19.5 on pci0
ehci0: AMD SB600/700 quirk applied
usbus5: EHCI version 1.0
usbus5: <EHCI (generic) USB 2.0 controller> on ehci0
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x5040-0x504f irq 16 at device 20.1 on pci0
ata0: <ATA channel 0> on atapci0
hdac0: <ATI SB600 High Definition Audio Controller> irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci2: <ACPI PCI bus> on pcib5
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xd0100000-0xd0100fff irq 20 at device 4.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
acpi_throttle0: <ACPI CPU Throttling> on cpu0
powernow0: <PowerNow! K8> on cpu0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
powernow1: <PowerNow! K8> on cpu1
Timecounters tick every 1.000 msec
hdac0: HDA Codec #0: Analog Devices AD1981HD
hdac0: HDA Codec #1: Lucent/Agere Systems (Unknown)
pcm0: <HDA Analog Devices AD1981HD PCM #0 Analog> at cad 0 nid 1 on hdac0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD1600BEVT-00A0RT0 01.01A01> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 152627MB (312581809 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
cd0 at ata0 bus 0 scbus1 target 0 lun 0
cd0: <TEAC DV-W28E-R C.B0> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray open
Root mount waiting for: usbus5
Root mount waiting for: usbus5
Root mount waiting for: usbus5
Root mount waiting for: usbus5
uhub5: 10 ports with 10 removable, self powered
Root mount waiting for: usbus5
Trying to mount root from ufs:/dev/label/rootFS [rw,async]...
ugen0.2: <Broadcom Corp> at usbus0
WARNING: TMPFS is considered to be a highly experimental feature in FreeBSD.
bwn0: firmware version (rev 410 patch 2160 date 0x751a time 0x7c0a)
wlan0: Ethernet address: 00:21:00:0a:64:8f
bwn0: status of RF switch is changed to OFF
ubt0: <Broadcom Corp HP Integrated Module, class 224/1, rev 2.00/1.00, addr 2> on usbus0
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.19
drm0: <ATI Radeon RS690 X1270 IGP> on vgapci0
info: [drm] MSI enabled 1 message(s)
info: [drm] Initialized radeon 1.31.0 20080613
info: [drm] Setting GART location based on new memory map
info: [drm] Loading RS690/RS740 Microcode
info: [drm] Num pipes: 1
info: [drm] writeback test succeeded in 1 usecs
dmesg.9.1.rc3.txt
(text/plain, 59.4 KB)
After Disable 0 255 N 0 10 11
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 9
Validation 0 255 N 0 9
After Disable 0 255 N 0 9
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: decoding 4 range 0-0xcf7
pcib0: decoding 4 range 0xd00-0xffff
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0xc0000000-0xfedfffff
pcib0: Length mismatch for 3 range: 11ff000 vs 11fefff
pcib0: decoding 3 range 0xfee01000-0xffffffff
pcib0: decoding 3 range 0xd3000-0xdffff
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1002, dev=0x7910, revid=0x00
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2220, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x7912, revid=0x00
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x7914, revid=0x00
domain=0, bus=0, slot=4, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x1002, dev=0x7915, revid=0x00
domain=0, bus=0, slot=5, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x1002, dev=0x7916, revid=0x00
domain=0, bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x1002, dev=0x4380, revid=0x00
domain=0, bus=0, slot=18, func=0
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x9000, size 3, enabled
pcib0: allocated type 4 (0x9000-0x9007) for rid 10 of pci0:0:18:0
map[14]: type I/O Port, range 32, base 0x9008, size 2, enabled
pcib0: allocated type 4 (0x9008-0x900b) for rid 14 of pci0:0:18:0
map[18]: type I/O Port, range 32, base 0x9010, size 3, enabled
pcib0: allocated type 4 (0x9010-0x9017) for rid 18 of pci0:0:18:0
map[1c]: type I/O Port, range 32, base 0x5018, size 2, enabled
pcib0: allocated type 4 (0x5018-0x501b) for rid 1c of pci0:0:18:0
map[20]: type I/O Port, range 32, base 0x5020, size 4, enabled
pcib0: allocated type 4 (0x5020-0x502f) for rid 20 of pci0:0:18:0
map[24]: type Memory, range 32, base 0xd0409000, size 10, enabled
pcib0: allocated type 3 (0xd0409000-0xd04093ff) for rid 24 of pci0:0:18:0
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x4387, revid=0x00
domain=0, bus=0, slot=19, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type Memory, range 32, base 0xd0401000, size 12, enabled
pcib0: allocated type 3 (0xd0401000-0xd0401fff) for rid 10 of pci0:0:19:0
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 23
found-> vendor=0x1002, dev=0x4388, revid=0x00
domain=0, bus=0, slot=19, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
map[10]: type Memory, range 32, base 0xd0402000, size 12, enabled
pcib0: allocated type 3 (0xd0402000-0xd0402fff) for rid 10 of pci0:0:19:1
pcib0: matched entry for 0.19.INTB
pcib0: slot 19 INTB hardwired to IRQ 17
found-> vendor=0x1002, dev=0x4389, revid=0x00
domain=0, bus=0, slot=19, func=2
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
map[10]: type Memory, range 32, base 0xd0403000, size 12, enabled
pcib0: allocated type 3 (0xd0403000-0xd0403fff) for rid 10 of pci0:0:19:2
pcib0: matched entry for 0.19.INTC
pcib0: slot 19 INTC hardwired to IRQ 17
found-> vendor=0x1002, dev=0x438a, revid=0x00
domain=0, bus=0, slot=19, func=3
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
map[10]: type Memory, range 32, base 0xd0404000, size 12, enabled
pcib0: allocated type 3 (0xd0404000-0xd0404fff) for rid 10 of pci0:0:19:3
pcib0: matched entry for 0.19.INTB
pcib0: slot 19 INTB hardwired to IRQ 17
found-> vendor=0x1002, dev=0x438b, revid=0x00
domain=0, bus=0, slot=19, func=4
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
map[10]: type Memory, range 32, base 0xd0405000, size 12, enabled
pcib0: allocated type 3 (0xd0405000-0xd0405fff) for rid 10 of pci0:0:19:4
pcib0: matched entry for 0.19.INTC
pcib0: slot 19 INTC hardwired to IRQ 17
found-> vendor=0x1002, dev=0x4386, revid=0x00
domain=0, bus=0, slot=19, func=5
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xd0406000, size 8, enabled
pcib0: allocated type 3 (0xd0406000-0xd04060ff) for rid 10 of pci0:0:19:5
pcib0: matched entry for 0.19.INTD
pcib0: slot 19 INTD hardwired to IRQ 23
found-> vendor=0x1002, dev=0x4385, revid=0x14
domain=0, bus=0, slot=20, func=0
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0003, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type I/O Port, range 32, base 0x8200, size 4, enabled
pcib0: allocated type 4 (0x8200-0x820f) for rid 10 of pci0:0:20:0
found-> vendor=0x1002, dev=0x438c, revid=0x00
domain=0, bus=0, slot=20, func=1
class=01-01-82, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0220, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:20:1
pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:20:1
pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:20:1
pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:20:1
map[20]: type I/O Port, range 32, base 0x5040, size 4, enabled
pcib0: allocated type 4 (0x5040-0x504f) for rid 20 of pci0:0:20:1
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x4383, revid=0x00
domain=0, bus=0, slot=20, func=2
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0410, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 64, base 0xd0408000, size 14, enabled
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x438d, revid=0x00
domain=0, bus=0, slot=20, func=3
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4384, revid=0x00
domain=0, bus=0, slot=20, func=4
class=06-04-01, hdrtype=0x01, mfdev=1
cmdreg=0x0027, statreg=0x02a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
domain=0, bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
domain=0, bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
domain=0, bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
domain=0, bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib0: allocated type 4 (0x4000-0x4fff) for rid 1c of pcib1
pcib0: allocated type 3 (0xd0200000-0xd03fffff) for rid 20 of pcib1
pcib0: allocated type 3 (0xc0000000-0xc7ffffff) for rid 24 of pcib1
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x4000-0x4fff
pcib1: memory decode 0xd0200000-0xd03fffff
pcib1: prefetched decode 0xc0000000-0xc7ffffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1002, dev=0x791f, revid=0x00
domain=0, bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Prefetchable Memory, range 64, base 0xc0000000, size 27, enabled
pcib1: allocated prefetch range (0xc0000000-0xc7ffffff) for rid 10 of pci0:1:5:0
map[18]: type Memory, range 64, base 0xd0200000, size 16, enabled
pcib1: allocated memory range (0xd0200000-0xd020ffff) for rid 18 of pci0:1:5:0
map[20]: type I/O Port, range 32, base 0x4000, size 8, enabled
pcib1: allocated I/O port range (0x4000-0x40ff) for rid 20 of pci0:1:5:0
map[24]: type Memory, range 32, base 0xd0300000, size 20, enabled
pcib1: allocated memory range (0xd0300000-0xd03fffff) for rid 24 of pci0:1:5:0
pcib1: matched entry for 1.5.INTB
pcib1: slot 5 INTB hardwired to IRQ 19
vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 0xc0000000-0xc7ffffff,0xd0200000-0xd020ffff,0xd0300000-0xd03fffff irq 19 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pcib0: allocated type 3 (0xd0000000-0xd00fffff) for rid 20 of pcib2
pcib2: domain 0
pcib2: secondary bus 16
pcib2: subordinate bus 16
pcib2: memory decode 0xd0000000-0xd00fffff
pcib2: no prefetched decode
pcib2: could not get PCI interrupt routing table for \\_SB_.C08B.C250 - AE_NOT_FOUND
pci16: <ACPI PCI bus> on pcib2
pci16: domain=0, physical bus=16
found-> vendor=0x14e4, dev=0x1713, revid=0x02
domain=0, bus=16, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xd0000000, size 16, enabled
pcib2: allocated memory range (0xd0000000-0xd000ffff) for rid 10 of pci0:16:0:0
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 16
pcib2: slot 0 INTA is routed to irq 16
bge0: <Broadcom BCM5906 A2, ASIC rev. 0x00c002> mem 0xd0000000-0xd000ffff irq 16 at device 0.0 on pci16
bge0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 51
bge0: using IRQ 256 for MSI
bge0: CHIP ID 0x0000c002; ASIC REV 0x0c; CHIP REV 0xc0; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5906 10/100baseTX media interface> PHY 1 on miibus0
brgphy0: OUI 0x0050ef, model 0x0004, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
bge0: bpf attached
bge0: Ethernet address: 00:1f:29:89:38:f3
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pcib0: allocated type 4 (0x2000-0x3fff) for rid 1c of pcib3
pcib0: allocated type 3 (0xcc000000-0xcfffffff) for rid 20 of pcib3
pcib3: domain 0
pcib3: secondary bus 32
pcib3: subordinate bus 32
pcib3: I/O decode 0x2000-0x3fff
pcib3: memory decode 0xcc000000-0xcfffffff
pcib3: no prefetched decode
pcib3: could not get PCI interrupt routing table for \\_SB_.C08B.C255 - AE_NOT_FOUND
pci32: <ACPI PCI bus> on pcib3
pci32: domain=0, physical bus=32
pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib0: allocated type 3 (0xc8000000-0xc80fffff) for rid 20 of pcib4
pcib4: domain 0
pcib4: secondary bus 48
pcib4: subordinate bus 48
pcib4: memory decode 0xc8000000-0xc80fffff
pcib4: no prefetched decode
pcib4: could not get PCI interrupt routing table for \\_SB_.C08B.C25F - AE_NOT_FOUND
pci48: <ACPI PCI bus> on pcib4
pci48: domain=0, physical bus=48
found-> vendor=0x14e4, dev=0x4312, revid=0x02
domain=0, bus=48, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xc8000000, size 14, enabled
pcib4: allocated memory range (0xc8000000-0xc8003fff) for rid 10 of pci0:48:0:0
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 18
pcib4: slot 0 INTA is routed to irq 18
pci48: <network> at device 0.0 (no driver attached)
ahci0: <ATI IXP600 AHCI SATA controller> port 0x9000-0x9007,0x9008-0x900b,0x9010-0x9017,0x5018-0x501b,0x5020-0x502f mem 0xd0409000-0xd04093ff irq 16 at device 18.0 on pci0
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 52
ahci0: AHCI v0.00 with 1 ?Gbps ports, Port Multiplier not supported with FBS
ahci0: Caps: ?Gbps FBS 2cmd 1ports
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: Caps: FBSCP
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: Caps: FBSCP
ahcich2: not probed (disabled)
ahcich3: not probed (disabled)
ahcich4: not probed (disabled)
ahcich5: not probed (disabled)
ahcich6: not probed (disabled)
ahcich7: <AHCI channel> at channel 7 on ahci0
device_attach: ahcich7 attach returned 6
ahcich8: <AHCI channel> at channel 8 on ahci0
device_attach: ahcich8 attach returned 6
ahcich9: <AHCI channel> at channel 9 on ahci0
device_attach: ahcich9 attach returned 6
ahcich10: <AHCI channel> at channel 10 on ahci0
device_attach: ahcich10 attach returned 6
ahcich11: <AHCI channel> at channel 11 on ahci0
device_attach: ahcich11 attach returned 6
ahcich12: <AHCI channel> at channel 12 on ahci0
device_attach: ahcich12 attach returned 6
ahcich13: <AHCI channel> at channel 13 on ahci0
device_attach: ahcich13 attach returned 6
ahcich14: <AHCI channel> at channel 14 on ahci0
device_attach: ahcich14 attach returned 6
ahcich15: <AHCI channel> at channel 15 on ahci0
device_attach: ahcich15 attach returned 6
ahcich16: not probed (disabled)
ahcich17: not probed (disabled)
ahcich18: not probed (disabled)
ahcich19: not probed (disabled)
ahcich20: not probed (disabled)
ahcich21: <AHCI channel> at channel 21 on ahci0
device_attach: ahcich21 attach returned 6
ahcich22: not probed (disabled)
ahcich23: not probed (disabled)
ahcich24: <AHCI channel> at channel 24 on ahci0
device_attach: ahcich24 attach returned 6
ahcich25: <AHCI channel> at channel 25 on ahci0
device_attach: ahcich25 attach returned 6
ahcich26: <AHCI channel> at channel 26 on ahci0
device_attach: ahcich26 attach returned 6
ahcich27: not probed (disabled)
ahcich28: <AHCI channel> at channel 28 on ahci0
device_attach: ahcich28 attach returned 6
ahcich29: <AHCI channel> at channel 29 on ahci0
device_attach: ahcich29 attach returned 6
ahcich30: <AHCI channel> at channel 30 on ahci0
device_attach: ahcich30 attach returned 6
ahcich31: <AHCI channel> at channel 31 on ahci0
device_attach: ahcich31 attach returned 6
ahcich32: <AHCI channel> at channel 32 on ahci0
device_attach: ahcich32 attach returned 6
ahcich33: <AHCI channel> at channel 33 on ahci0
device_attach: ahcich33 attach returned 6
ahcich34: not probed (disabled)
ahcich35: not probed (disabled)
ahcich36: not probed (disabled)
ahcich37: not probed (disabled)
ahcich38: not probed (disabled)
ahcich39: <AHCI channel> at channel 39 on ahci0
device_attach: ahcich39 attach returned 6
ahcich40: <AHCI channel> at channel 40 on ahci0
device_attach: ahcich40 attach returned 6
ahcich41: <AHCI channel> at channel 41 on ahci0
device_attach: ahcich41 attach returned 6
ahcich42: <AHCI channel> at channel 42 on ahci0
device_attach: ahcich42 attach returned 6
ahcich43: <AHCI channel> at channel 43 on ahci0
device_attach: ahcich43 attach returned 6
ahcich44: <AHCI channel> at channel 44 on ahci0
device_attach: ahcich44 attach returned 6
ahcich45: <AHCI channel> at channel 45 on ahci0
device_attach: ahcich45 attach returned 6
ahcich46: <AHCI channel> at channel 46 on ahci0
device_attach: ahcich46 attach returned 6
ahcich47: <AHCI channel> at channel 47 on ahci0
device_attach: ahcich47 attach returned 6
ahcich48: not probed (disabled)
ahcich49: not probed (disabled)
ahcich50: not probed (disabled)
ahcich51: not probed (disabled)
ahcich52: not probed (disabled)
ahcich53: <AHCI channel> at channel 53 on ahci0
device_attach: ahcich53 attach returned 6
ahcich54: not probed (disabled)
ahcich55: not probed (disabled)
ahcich56: <AHCI channel> at channel 56 on ahci0
device_attach: ahcich56 attach returned 6
ahcich57: <AHCI channel> at channel 57 on ahci0
device_attach: ahcich57 attach returned 6
ahcich58: <AHCI channel> at channel 58 on ahci0
device_attach: ahcich58 attach returned 6
ahcich59: not probed (disabled)
ahcich60: <AHCI channel> at channel 60 on ahci0
device_attach: ahcich60 attach returned 6
ahcich61: <AHCI channel> at channel 61 on ahci0
device_attach: ahcich61 attach returned 6
ahcich62: <AHCI channel> at channel 62 on ahci0
device_attach: ahcich62 attach returned 6
ahcich63: <AHCI channel> at channel 63 on ahci0
device_attach: ahcich63 attach returned 6
ohci0: <OHCI (generic) USB controller> mem 0xd0401000-0xd0401fff irq 23 at device 19.0 on pci0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 53
usbus0 on ohci0
usbus0: bpf attached
ohci0: usbpf: Attached
ohci1: <OHCI (generic) USB controller> mem 0xd0402000-0xd0402fff irq 17 at device 19.1 on pci0
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 54
usbus1 on ohci1
usbus1: bpf attached
ohci1: usbpf: Attached
ohci2: <OHCI (generic) USB controller> mem 0xd0403000-0xd0403fff irq 17 at device 19.2 on pci0
usbus2 on ohci2
usbus2: bpf attached
ohci2: usbpf: Attached
ohci3: <OHCI (generic) USB controller> mem 0xd0404000-0xd0404fff irq 17 at device 19.3 on pci0
usbus3 on ohci3
usbus3: bpf attached
ohci3: usbpf: Attached
ohci4: <OHCI (generic) USB controller> mem 0xd0405000-0xd0405fff irq 17 at device 19.4 on pci0
usbus4 on ohci4
usbus4: bpf attached
ohci4: usbpf: Attached
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd0406000-0xd04060ff irq 23 at device 19.5 on pci0
ehci0: AMD SB600/700 quirk applied
ehci0: Dropped interrupts workaround enabled
usbus5: EHCI version 1.0
usbus5 on ehci0
usbus5: bpf attached
ehci0: usbpf: Attached
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x5040-0x504f irq 16 at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 55
hdac0: <ATI SB600 HDA Controller> irq 16 at device 20.2 on pci0
hdac0: HDA Driver Revision: 20120126_0002
hdac0: Config options: on=0x00000000 off=0x00000000
pcib0: allocated type 3 (0xc8100000-0xc8103fff) for rid 10 of hdac0
hdac0: Lazy allocation of 0x4000 bytes rid 0x10 type 3 at 0xc8100000
hdac0: Caps: OSS 4, ISS 4, BSS 0, NSDO 1, 64bit, CORB 256, RIRB 256
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pcib0: allocated type 3 (0xd0100000-0xd01fffff) for rid 20 of pcib5
pcib5: domain 0
pcib5: secondary bus 2
pcib5: subordinate bus 3
pcib5: memory decode 0xd0100000-0xd01fffff
pcib5: no prefetched decode
pcib5: Subtractively decoded bridge.
pci2: <ACPI PCI bus> on pcib5
pci2: domain=0, physical bus=2
found-> vendor=0x1180, dev=0x0476, revid=0xb6
domain=0, bus=2, slot=4, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xd0100000, size 12, enabled
pcib5: allocated memory range (0xd0100000-0xd0100fff) for rid 10 of pci0:2:4:0
pcib5: matched entry for 2.4.INTA
pcib5: slot 4 INTA hardwired to IRQ 20
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xd0100000-0xd0100fff irq 20 at device 4.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 56
cbb0: PCI Configuration space:
0x00: 0x04761180 0x02100007 0x060700b6 0x00824000
0x10: 0xd0100000 0x020000dc 0x20030302 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x07000114
0x40: 0x30c2103c 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x30a00001 0x00000000 0x04630463 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000008 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0xbe000000 0x00003000 0x00000000
0xc0: 0x30c2103c 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 57
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 58
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00004000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
acpi0: wakeup code va 0xffffff810f9cc000 pa 0x90000
ex_isa_identify()
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 1: ioport 0x1c00 alloc failed
ahc_isa_probe 2: ioport 0x2c00 alloc failed
ahc_isa_probe 3: ioport 0x3c00 alloc failed
ahc_isa_probe 4: ioport 0x4c00 alloc failed
ahc_isa_probe 5: ioport 0x5c00 alloc failed
ahc_isa_probe 6: ioport 0x6c00 alloc failed
ahc_isa_probe 7: ioport 0x7c00 alloc failed
ahc_isa_probe 8: ioport 0x8c00 alloc failed
ahc_isa_probe 9: ioport 0x9c00 alloc failed
ahc_isa_probe 10: ioport 0xac00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
pcib0: allocated type 3 (0xd3000-0xd37ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd3800-0xd3fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd4000-0xd47ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd4800-0xd4fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd5000-0xd57ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd5800-0xd5fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd6000-0xd67ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd6800-0xd6fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd7000-0xd77ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd7800-0xd7fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd8000-0xd87ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd8800-0xd8fff) for rid 1 of orm0
pcib0: allocated type 3 (0xd9000-0xd97ff) for rid 1 of orm0
pcib0: allocated type 3 (0xd9800-0xd9fff) for rid 1 of orm0
pcib0: allocated type 3 (0xda000-0xda7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xda800-0xdafff) for rid 1 of orm0
pcib0: allocated type 3 (0xdb000-0xdb7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdb800-0xdbfff) for rid 1 of orm0
pcib0: allocated type 3 (0xdc000-0xdc7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdc800-0xdcfff) for rid 1 of orm0
pcib0: allocated type 3 (0xdd000-0xdd7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdd800-0xddfff) for rid 1 of orm0
pcib0: allocated type 3 (0xde000-0xde7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xde800-0xdefff) for rid 1 of orm0
pcib0: allocated type 3 (0xdf000-0xdf7ff) for rid 1 of orm0
pcib0: allocated type 3 (0xdf800-0xdffff) for rid 1 of orm0
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0 failed to probe at irq 7 on isa0
pcib0: allocated type 4 (0x3f8-0x3ff) for rid 0 of uart0
uart0 failed to probe at port 0x3f8-0x3ff irq 4 on isa0
pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1
uart1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
wbwd0 failed to probe on isa0
isa_probe_children: probing PnP devices
ctl: CAM Target Layer loaded
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x8010
powernow0: <PowerNow! K8> on cpu0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
powernow1: <PowerNow! K8> on cpu1
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 99750291 Hz
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
hptrr: no controller detected.
hdacc0: <Analog Devices AD1981HD HDA CODEC> at cad 0 on hdac0
hdacc0: Root Node at nid=0: 1 subnodes 1-1
hdaa0: <Analog Devices AD1981HD Audio Function Group> at nid 1 on hdacc0
hdaa0: Audio Function Group at nid=1: 30 subnodes 2-31
hdaa0: NumGPIO=4 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1
hdaa0: GPIO0: disabled
hdaa0: GPIO1: disabled
hdaa0: GPIO2: disabled
hdaa0: GPIO3: disabled
hdaa0: WARNING: nid=2 has cnid outside of the AFG range j=0 entnum=4 index=0 res=0x00000401
hdaa0: Original pins configuration:
hdaa0: nid 0x as seq device conn jack loc color misc
hdaa0: 5 92174110 1 0 Speaker Fixed Analog 0x12 Green 1
hdaa0: 6 0421201f 1 15 Headphones Jack 1/8 Right Grey 0
hdaa0: 7 410710f0 15 0 Line-out None Analog Rear Black 0
hdaa0: 8 04a12020 2 0 Mic Jack 1/8 Right Grey 0
hdaa0: 9 0181302e 2 14 Line-in Jack 1/8 Rear Blue 0
hdaa0: 10 4145f0f0 15 0 SPDIF-out None Optical Rear Other 0
hdaa0: 22 995711f0 15 0 Digital-out Fixed Analog Onboard Black 1
hdaa0: 23 5993e0f0 15 0 AUX None ATAPI Onboard White 0
hdaa0: 24 f0a79159 5 9 Mic Both Analog Other Pink 1
hdaa0: 25 593310f0 15 0 CD None ATAPI Onboard Black 0
hdaa0: Patched pins configuration:
hdaa0: nid 0x as seq device conn jack loc color misc
hdaa0: 5 92174110 1 0 Speaker Fixed Analog 0x12 Green 1
hdaa0: 6 0421201f 1 15 Headphones Jack 1/8 Right Grey 0
hdaa0: 7 410710f0 15 0 Line-out None Analog Rear Black 0 DISA
hdaa0: 8 04a12020 2 0 Mic Jack 1/8 Right Grey 0
hdaa0: 9 0181302e 2 14 Line-in Jack 1/8 Rear Blue 0
hdaa0: 10 4145f0f0 15 0 SPDIF-out None Optical Rear Other 0 DISA
hdaa0: 22 995711f0 15 0 Digital-out Fixed Analog Onboard Black 1
hdaa0: 23 5993e0f0 15 0 AUX None ATAPI Onboard White 0 DISA
hdaa0: 24 f0a79159 5 9 Mic Both Analog Other Pink 1
hdaa0: 25 593310f0 15 0 CD None ATAPI Onboard Black 0 DISA
hdaa0: 4 associations found:
hdaa0: Association 0 (1) out:
hdaa0: Pin nid=5 seq=0
hdaa0: Pin nid=6 seq=15
hdaa0: Association 1 (2) in:
hdaa0: Pin nid=8 seq=0
hdaa0: Pin nid=9 seq=14
hdaa0: Association 2 (5) in:
hdaa0: Pin nid=24 seq=9
hdaa0: Association 3 (15) out:
hdaa0: Pin nid=22 seq=0
hdaa0: Tracing association 0 (1)
hdaa0: Pin 5 traced to DAC 3
hdaa0: Pin 6 traced to DAC 3 and hpredir 0
hdaa0: Association 0 (1) trace succeeded
hdaa0: Tracing association 1 (2)
hdaa0: Pin 8 traced to ADC 4
hdaa0: Pin 9 traced to ADC 4
hdaa0: Association 1 (2) trace succeeded
hdaa0: Tracing association 2 (5)
hdaa0: Association 2 (5) trace failed
hdaa0: Tracing association 3 (15)
hdaa0: Unable to trace pin 22 seq 0 with min nid 0
hdaa0: Association 3 (15) trace failed
hdaa0: Looking for additional DAC for association 0 (1)
hdaa0: Looking for additional ADC for association 1 (2)
hdaa0: Tracing input monitor
hdaa0: Tracing nid 12 to out
hdaa0: Tracing other input monitors
hdaa0: Tracing nid 8 to out
hdaa0: nid 8 is input monitor
hdaa0: Tracing nid 9 to out
hdaa0: nid 9 is input monitor
hdaa0: Tracing beeper
hdaa0: nid 16 traced to out
hdaa0: Headphones redirection for association 0 nid=6 using unsolicited responses.
hdaa0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
hdaa0:
hdaa0: +-------------------+
hdaa0: | DUMPING HDA NODES |
hdaa0: +-------------------+
hdaa0:
hdaa0: Default Parameter
hdaa0: -----------------
hdaa0: Stream cap: 0x00000001
hdaa0: PCM
hdaa0: PCM cap: 0x000e007f
hdaa0: 16 20 24 bits, 8 11 16 22 32 44 48 KHz
hdaa0: IN amp: 0x00270300
hdaa0: OUT amp: 0x80053f3d
hdaa0:
hdaa0: nid: 2 [DISABLED]
hdaa0: Name: audio output
hdaa0: Widget cap: 0x00030311
hdaa0: DIGITAL STEREO
hdaa0: Stream cap: 0x00000005
hdaa0: AC3 PCM
hdaa0: PCM cap: 0x00020060
hdaa0: 16 bits, 44 48 KHz
hdaa0: connections: 2
hdaa0: |
hdaa0: + [DISABLED] <- nid=1 [GHOST!] [UNKNOWN] (selected)
hdaa0: + <- nid=4 [audio input]
hdaa0:
hdaa0: nid: 3
hdaa0: Name: audio output
hdaa0: Widget cap: 0x00000441
hdaa0: PWR PROC STEREO
hdaa0: Association: 0 (0x00008001)
hdaa0: OSS: pcm (pcm)
hdaa0: Stream cap: 0x00000001
hdaa0: PCM
hdaa0: PCM cap: 0x000e007f
hdaa0: 16 20 24 bits, 8 11 16 22 32 44 48 KHz
hdaa0:
hdaa0: nid: 4
hdaa0: Name: audio input
hdaa0: Widget cap: 0x00100511
hdaa0: PWR STEREO
hdaa0: Association: 1 (0x00004001)
hdaa0: Stream cap: 0x00000001
hdaa0: PCM
hdaa0: PCM cap: 0x0006007f
hdaa0: 16 20 bits, 8 11 16 22 32 44 48 KHz
hdaa0: connections: 1
hdaa0: |
hdaa0: + <- nid=21 [audio selector]
hdaa0:
hdaa0: nid: 5
hdaa0: Name: pin: Speaker (Fixed)
hdaa0: Widget cap: 0x00400187
hdaa0: UNSOL STEREO
hdaa0: Association: 0 (0x00000001)
hdaa0: Pin cap: 0x0001173f
hdaa0: ISC TRQD PDC HP OUT IN VREF[ 50 80 GROUND HIZ ] EAPD
hdaa0: Pin config: 0x92174110
hdaa0: Pin control: 0x00000040 OUT
hdaa0: EAPD: 0x00000002
hdaa0: Output amp: 0x80053f3d
hdaa0: mute=1 step=63 size=5 offset=61
hdaa0: Input amp: 0x00270300
hdaa0: mute=0 step=3 size=39 offset=0
hdaa0: connections: 2
hdaa0: |
hdaa0: + [DISABLED] <- nid=3 [audio output]
hdaa0: + <- nid=14 [audio mixer] (selected)
hdaa0:
hdaa0: nid: 6
hdaa0: Name: pin: Headphones (Grey Jack)
hdaa0: Widget cap: 0x00400185
hdaa0: UNSOL STEREO
hdaa0: Association: 0 (0x00008000)
hdaa0: Pin cap: 0x0000001f
hdaa0: ISC TRQD PDC HP OUT
hdaa0: Pin config: 0x0421201f
hdaa0: Pin control: 0x000000c0 HP OUT
hdaa0: Output amp: 0x80053f3d
hdaa0: mute=1 step=63 size=5 offset=61
hdaa0: connections: 2
hdaa0: |
hdaa0: + [DISABLED] <- nid=3 [audio output]
hdaa0: + <- nid=14 [audio mixer] (selected)
hdaa0:
hdaa0: nid: 7 [DISABLED]
hdaa0: Name: pin: Line-out (None)
hdaa0: Widget cap: 0x00400104
hdaa0: Pin cap: 0x00000010
hdaa0: OUT
hdaa0: Pin config: 0x410710f0
hdaa0: Pin control: 0x00000000
hdaa0: Output amp: 0x80053f3d
hdaa0: mute=1 step=63 size=5 offset=61
hdaa0: connections: 1
hdaa0: |
hdaa0: + [DISABLED] <- nid=15 [audio mixer] [DISABLED]
hdaa0:
hdaa0: nid: 8
hdaa0: Name: pin: Mic (Grey Jack)
hdaa0: Widget cap: 0x00400083
hdaa0: UNSOL STEREO
hdaa0: Association: 1 (0x00000001)
hdaa0: OSS: mic (mic)
hdaa0: Pin cap: 0x00001727
hdaa0: ISC TRQD PDC IN VREF[ 50 80 GROUND HIZ ]
hdaa0: Pin config: 0x04a12020
hdaa0: Pin control: 0x00000024 IN VREFs
hdaa0: Input amp: 0x00270300
hdaa0: mute=0 step=3 size=39 offset=0
hdaa0:
hdaa0: nid: 9
hdaa0: Name: pin: Line-in (Blue Jack)
hdaa0: Widget cap: 0x00400187
hdaa0: UNSOL STEREO
hdaa0: Association: 1 (0x00004000)
hdaa0: OSS: line (line)
hdaa0: Pin cap: 0x00001737
hdaa0: ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ]
hdaa0: Pin config: 0x0181302e
hdaa0: Pin control: 0x00000024 IN VREFs
hdaa0: Output amp: 0x80053f3d
hdaa0: mute=1 step=63 size=5 offset=61
hdaa0: Input amp: 0x00270300
hdaa0: mute=0 step=3 size=39 offset=0
hdaa0: connections: 2
hdaa0: |
hdaa0: + [DISABLED] <- nid=3 [audio output] (selected)
hdaa0: + [DISABLED] <- nid=14 [audio mixer]
hdaa0:
hdaa0: nid: 10 [DISABLED]
hdaa0: Name: pin: SPDIF-out (None)
hdaa0: Widget cap: 0x00400301
hdaa0: DIGITAL STEREO
hdaa0: Pin cap: 0x00000010
hdaa0: OUT
hdaa0: Pin config: 0x4145f0f0
hdaa0: Pin control: 0x00000000
hdaa0: connections: 1
hdaa0: |
hdaa0: + <- nid=2 [audio output] [DISABLED]
hdaa0:
hdaa0: nid: 11 [DISABLED]
hdaa0: Name: audio selector
hdaa0: Widget cap: 0x00300101
hdaa0: STEREO
hdaa0: connections: 6
hdaa0: |
hdaa0: + <- nid=3 [audio output] (selected)
hdaa0: + <- nid=12 [audio mixer]
hdaa0: + <- nid=9 [pin: Line-in (Blue Jack)]
hdaa0: + <- nid=14 [audio mixer]
hdaa0: + <- nid=5 [pin: Speaker (Fixed)]
hdaa0: + <- nid=24 [pin: Mic (Both)] [DISABLED]
hdaa0:
hdaa0: nid: 12
hdaa0: Name: audio mixer
hdaa0: Widget cap: 0x00200101
hdaa0: STEREO
hdaa0: Association: 1 (0x00000001)
hdaa0: OSS: mic
hdaa0: connections: 2
hdaa0: |
hdaa0: + <- nid=30 [audio selector]
hdaa0: + [DISABLED] <- nid=31 [audio selector] [DISABLED]
hdaa0:
hdaa0: nid: 13
hdaa0: Name: audio selector
hdaa0: Widget cap: 0x0030010c
hdaa0: Association: -2 (0x00000000)
hdaa0: OSS: speaker
hdaa0: Output amp: 0x800b0f0f
hdaa0: mute=1 step=15 size=11 offset=15
hdaa0: connections: 2
hdaa0: |
hdaa0: + <- nid=16 [beep widget] (selected)
hdaa0: + [DISABLED] <- nid=22 [pin: Digital-out (Fixed)] [DISABLED]
hdaa0:
hdaa0: nid: 14
hdaa0: Name: audio mixer
hdaa0: Widget cap: 0x00200101
hdaa0: STEREO
hdaa0: Association: 0 (0x00008001)
hdaa0: OSS: pcm, speaker, line, mic
hdaa0: connections: 8
hdaa0: |
hdaa0: + <- nid=13 [audio selector]
hdaa0: + <- nid=17 [audio selector]
hdaa0: + <- nid=18 [audio selector]
hdaa0: + <- nid=19 [audio selector]
hdaa0: + [DISABLED] <- nid=26 [audio selector] [DISABLED]
hdaa0: + [DISABLED] <- nid=27 [audio selector] [DISABLED]
hdaa0: + [DISABLED] <- nid=28 [audio selector] [DISABLED]
hdaa0: + [DISABLED] <- nid=29 [audio selector] [DISABLED]
hdaa0:
hdaa0: nid: 15 [DISABLED]
hdaa0: Name: audio mixer
hdaa0: Widget cap: 0x00200100
hdaa0: connections: 1
hdaa0: |
hdaa0: + <- nid=11 [audio selector] [DISABLED]
hdaa0:
hdaa0: nid: 16
hdaa0: Name: beep widget
hdaa0: Widget cap: 0x00700000
hdaa0: Association: -2 (0x00000000)
hdaa0: OSS: speaker (speaker)
hdaa0:
hdaa0: nid: 17
hdaa0: Name: audio selector
hdaa0: Widget cap: 0x0030010d
hdaa0: STEREO
hdaa0: Association: 0 (0x00008001)
hdaa0: OSS: pcm
hdaa0: Output amp: 0x80051f17
hdaa0: mute=1 step=31 size=5 offset=23
hdaa0: connections: 1
hdaa0: |
hdaa0: + <- nid=3 [audio output]
hdaa0:
hdaa0: nid: 18
hdaa0: Name: audio selector
hdaa0: Widget cap: 0x0030010d
hdaa0: STEREO
hdaa0: Association: -2 (0x00000000)
hdaa0: OSS: mic
hdaa0: Output amp: 0x80051f17
hdaa0: mute=1 step=31 size=5 offset=23
hdaa0: connections: 1
hdaa0: |
hdaa0: + <- nid=8 [pin: Mic (Grey Jack)]
hdaa0:
hdaa0: nid: 19
hdaa0: Name: audio selector
hdaa0: Widget cap: 0x0030010d
hdaa0: STEREO
hdaa0: Association: -2 (0x00000000)
hdaa0: OSS: line
hdaa0: Output amp: 0x80051f17
hdaa0: mute=1 step=31 size=5 offset=23
hdaa0: connections: 1
hdaa0: |
hdaa0: + <- nid=9 [pin: Line-in (Blue Jack)]
hdaa0:
hdaa0: nid: 20 [DISABLED]
hdaa0: Name: power widget
hdaa0: Widget cap: 0x00500500
hdaa0: PWR
hdaa0: connections: 13
hdaa0: |
hdaa0: + <- nid=13 [audio selector] (selected)
hdaa0: + <- nid=14 [audio mixer]
hdaa0: + <- nid=15 [audio mixer] [DISABLED]
hdaa0: + <- nid=16 [beep widget]
hdaa0: + <- nid=19 [audio selector]
hdaa0: + <- nid=20 [power widget] [DISABLED]
hdaa0: + <- nid=21 [audio selector]
hdaa0: + <- nid=22 [pin: Digital-out (Fixed)] [DISABLED]
hdaa0: + <- nid=23 [pin: AUX (None)] [DISABLED]
hdaa0: + <- nid=24 [pin: Mic (Both)] [DISABLED]
hdaa0: + <- nid=25 [pin: CD (None)] [DISABLED]
hdaa0: + <- nid=26 [audio selector] [DISABLED]
hdaa0: + <- nid=29 [audio selector] [DISABLED]
hdaa0:
hdaa0: nid: 21
hdaa0: Name: audio selector
hdaa0: Widget cap: 0x0030010d
hdaa0: STEREO
hdaa0: Association: 1 (0x00004001)
hdaa0: OSS: line, mic
hdaa0: Output amp: 0x80050f00
hdaa0: mute=1 step=15 size=5 offset=0
hdaa0: connections: 8
hdaa0: |
hdaa0: + <- nid=12 [audio mixer]
hdaa0: + <- nid=9 [pin: Line-in (Blue Jack)] (selected)
hdaa0: + [DISABLED] <- nid=14 [audio mixer]
hdaa0: + [DISABLED] <- nid=15 [audio mixer] [DISABLED]
hdaa0: + [DISABLED] <- nid=25 [pin: CD (None)] [DISABLED]
hdaa0: + [DISABLED] <- nid=5 [pin: Speaker (Fixed)]
hdaa0: + [DISABLED] <- nid=24 [pin: Mic (Both)] [DISABLED]
hdaa0: + [DISABLED] <- nid=23 [pin: AUX (None)] [DISABLED]
hdaa0:
hdaa0: nid: 22 [DISABLED]
hdaa0: Name: pin: Digital-out (Fixed)
hdaa0: Widget cap: 0x00400000
hdaa0: Pin cap: 0x00000020
hdaa0: IN
hdaa0: Pin config: 0x995711f0
hdaa0: Pin control: 0x00000000
hdaa0:
hdaa0: nid: 23 [DISABLED]
hdaa0: Name: pin: AUX (None)
hdaa0: Widget cap: 0x00400081
hdaa0: UNSOL STEREO
hdaa0: Pin cap: 0x00000027
hdaa0: ISC TRQD PDC IN
hdaa0: Pin config: 0x5993e0f0
hdaa0: Pin control: 0x00000000
hdaa0:
hdaa0: nid: 24 [DISABLED]
hdaa0: Name: pin: Mic (Both)
hdaa0: Widget cap: 0x00400187
hdaa0: UNSOL STEREO
hdaa0: Pin cap: 0x00001737
hdaa0: ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ]
hdaa0: Pin config: 0xf0a79159
hdaa0: Pin control: 0x00000000
hdaa0: Output amp: 0x80053f3d
hdaa0: mute=1 step=63 size=5 offset=61
hdaa0: Input amp: 0x00270300
hdaa0: mute=0 step=3 size=39 offset=0
hdaa0: connections: 2
hdaa0: |
hdaa0: + [DISABLED] <- nid=3 [audio output] (selected)
hdaa0: + <- nid=14 [audio mixer]
hdaa0:
hdaa0: nid: 25 [DISABLED]
hdaa0: Name: pin: CD (None)
hdaa0: Widget cap: 0x00400001
hdaa0: STEREO
hdaa0: Pin cap: 0x00000020
hdaa0: IN
hdaa0: Pin config: 0x593310f0
hdaa0: Pin control: 0x00000000
hdaa0:
hdaa0: nid: 26 [DISABLED]
hdaa0: Name: audio selector
hdaa0: Widget cap: 0x0030010d
hdaa0: STEREO
hdaa0: Output amp: 0x80051f17
hdaa0: mute=1 step=31 size=5 offset=23
hdaa0: connections: 1
hdaa0: |
hdaa0: + <- nid=5 [pin: Speaker (Fixed)]
hdaa0:
hdaa0: nid: 27 [DISABLED]
hdaa0: Name: audio selector
hdaa0: Widget cap: 0x0030010d
hdaa0: STEREO
hdaa0: Output amp: 0x80051f17
hdaa0: mute=1 step=31 size=5 offset=23
hdaa0: connections: 1
hdaa0: |
hdaa0: + [DISABLED] <- nid=23 [pin: AUX (None)] [DISABLED]
hdaa0:
hdaa0: nid: 28 [DISABLED]
hdaa0: Name: audio selector
hdaa0: Widget cap: 0x0030010d
hdaa0: STEREO
hdaa0: Output amp: 0x80051f17
hdaa0: mute=1 step=31 size=5 offset=23
hdaa0: connections: 1
hdaa0: |
hdaa0: + <- nid=24 [pin: Mic (Both)] [DISABLED]
hdaa0:
hdaa0: nid: 29 [DISABLED]
hdaa0: Name: audio selector
hdaa0: Widget cap: 0x0030010d
hdaa0: STEREO
hdaa0: Output amp: 0x80051f17
hdaa0: mute=1 step=31 size=5 offset=23
hdaa0: connections: 1
hdaa0: |
hdaa0: + [DISABLED] <- nid=25 [pin: CD (None)] [DISABLED]
hdaa0:
hdaa0: nid: 30
hdaa0: Name: audio selector
hdaa0: Widget cap: 0x0030010d
hdaa0: STEREO
hdaa0: Association: 1 (0x00000001)
hdaa0: OSS: mic
hdaa0: Output amp: 0x80000000
hdaa0: mute=1 step=0 size=0 offset=0
hdaa0: connections: 1
hdaa0: |
hdaa0: + <- nid=8 [pin: Mic (Grey Jack)]
hdaa0:
hdaa0: nid: 31 [DISABLED]
hdaa0: Name: audio selector
hdaa0: Widget cap: 0x0030010d
hdaa0: STEREO
hdaa0: Output amp: 0x80000000
hdaa0: mute=1 step=0 size=0 offset=0
hdaa0: connections: 1
hdaa0: |
hdaa0: + <- nid=24 [pin: Mic (Both)] [DISABLED]
hdaa0:
pcm0: <Analog Devices AD1981HD (Analog 2.0+HP/2.0)> at nid 5,6 and 8,9 on hdaa0
pcm0: +--------------------------------------+
pcm0: | DUMPING PCM Playback/Record Channels |
pcm0: +--------------------------------------+
pcm0:
pcm0: Playback:
pcm0:
pcm0: Stream cap: 0x00000001
pcm0: PCM
pcm0: PCM cap: 0x000e007f
pcm0: 16 20 24 bits, 8 11 16 22 32 44 48 KHz
pcm0: DAC: 3
pcm0:
pcm0: Record:
pcm0:
pcm0: Stream cap: 0x00000001
pcm0: PCM
pcm0: PCM cap: 0x0006007f
pcm0: 16 20 bits, 8 11 16 22 32 44 48 KHz
pcm0: DAC: 4
pcm0:
pcm0: +-------------------------------+
pcm0: | DUMPING Playback/Record Paths |
pcm0: +-------------------------------+
pcm0:
pcm0: Playback:
pcm0:
pcm0: nid=5 [pin: Speaker (Fixed)]
pcm0: |
pcm0: + <- nid=14 [audio mixer] [src: pcm, speaker, line, mic]
pcm0: |
pcm0: + <- nid=13 [audio selector] [src: speaker]
pcm0: |
pcm0: + <- nid=16 [beep widget] [src: speaker]
pcm0: + <- nid=17 [audio selector] [src: pcm]
pcm0: |
pcm0: + <- nid=3 [audio output] [src: pcm]
pcm0: + <- nid=18 [audio selector] [src: mic]
pcm0: |
pcm0: + <- nid=8 [pin: Mic (Grey Jack)] [src: mic]
pcm0: + <- nid=19 [audio selector] [src: line]
pcm0: |
pcm0: + <- nid=9 [pin: Line-in (Blue Jack)] [src: line]
pcm0:
pcm0: nid=6 [pin: Headphones (Grey Jack)]
pcm0: |
pcm0: + <- nid=14 [audio mixer] [src: pcm, speaker, line, mic]
pcm0: |
pcm0: + <- nid=13 [audio selector] [src: speaker]
pcm0: |
pcm0: + <- nid=16 [beep widget] [src: speaker]
pcm0: + <- nid=17 [audio selector] [src: pcm]
pcm0: |
pcm0: + <- nid=3 [audio output] [src: pcm]
pcm0: + <- nid=18 [audio selector] [src: mic]
pcm0: |
pcm0: + <- nid=8 [pin: Mic (Grey Jack)] [src: mic]
pcm0: + <- nid=19 [audio selector] [src: line]
pcm0: |
pcm0: + <- nid=9 [pin: Line-in (Blue Jack)] [src: line]
pcm0:
pcm0: Record:
pcm0:
pcm0: nid=4 [audio input]
pcm0: |
pcm0: + <- nid=21 [audio selector] [src: line, mic]
pcm0: |
pcm0: + <- nid=12 [audio mixer] [src: mic]
pcm0: |
pcm0: + <- nid=30 [audio selector] [src: mic]
pcm0: |
pcm0: + <- nid=8 [pin: Mic (Grey Jack)] [src: mic]
pcm0: + <- nid=9 [pin: Line-in (Blue Jack)] [src: line]
pcm0:
pcm0: +-------------------------+
pcm0: | DUMPING Volume Controls |
pcm0: +-------------------------+
pcm0:
pcm0: Master Volume (OSS: vol): -91/3dB
pcm0: |
pcm0: +- ctl 1 (nid 5 in ): -91/3dB (64 steps) + mute
pcm0: +- ctl 3 (nid 6 in ): -91/3dB (64 steps) + mute
pcm0: +- ctl 8 (nid 13 out): -45/0dB (16 steps) + mute
pcm0: +- ctl 9 (nid 17 out): -34/12dB (32 steps) + mute
pcm0: +- ctl 10 (nid 18 out): -34/12dB (32 steps) + mute
pcm0: +- ctl 11 (nid 19 out): -34/12dB (32 steps) + mute
pcm0:
pcm0: PCM Volume (OSS: pcm): -34/12dB
pcm0: |
pcm0: +- ctl 9 (nid 17 out): -34/12dB (32 steps) + mute
pcm0:
pcm0: Microphone Volume (OSS: mic): 0/30dB
pcm0: |
pcm0: +- ctl 5 (nid 8 out): 0/30dB (4 steps)
pcm0: +- ctl 10 (nid 18 out): -34/12dB (32 steps) + mute
pcm0: +- ctl 12 (nid 21 out): 0/22dB (16 steps) + mute
pcm0: +- ctl 19 (nid 30 out): mute
pcm0:
pcm0: Line-in Volume (OSS: line): 0/30dB
pcm0: |
pcm0: +- ctl 7 (nid 9 out): 0/30dB (4 steps)
pcm0: +- ctl 11 (nid 19 out): -34/12dB (32 steps) + mute
pcm0: +- ctl 12 (nid 21 out): 0/22dB (16 steps) + mute
pcm0:
pcm0: Speaker/Beep Volume (OSS: speaker): -45/0dB
pcm0: |
pcm0: +- ctl 8 (nid 13 out): -45/0dB (16 steps) + mute
pcm0:
pcm0: Recording Level (OSS: rec): 0/22dB
pcm0: |
pcm0: +- ctl 12 (nid 21 out): 0/22dB (16 steps) + mute
pcm0: +- ctl 19 (nid 30 out): mute
pcm0:
pcm0: Input Monitoring Level (OSS: igain): -34/0dB
pcm0: |
pcm0: +- ctl 8 (nid 13 out): -45/0dB (16 steps) + mute
pcm0: +- ctl 10 (nid 18 out): -34/12dB (32 steps) + mute
pcm0: +- ctl 11 (nid 19 out): -34/12dB (32 steps) + mute
pcm0:
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "speaker":
pcm0: Mixer "line":
pcm0: Mixer "mic":
pcm0: Mixer "rec":
pcm0: Mixer "igain":
pcm0: Mixer "ogain":
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: sndbuf_setmap 13ff80000, 10000; 0xffffff810f9e4000 -> 13ff80000
pcm0: sndbuf_setmap 13ff00000, 10000; 0xffffff810fa24000 -> 13ff00000
hdacc1: <Lucent/Agere Systems (0x1040) HDA CODEC> at cad 1 on hdac0
hdacc1: Root Node at nid=0: 1 subnodes 1-1
unknown: <Lucent/Agere Systems (0x1040) HDA CODEC Modem Function Group> at nid 1 on hdacc1 (no driver attached)
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
acpi_tz0: _AC3: temperature 66.0 >= setpoint 40.0
acpi_tz0: _AC2: temperature 66.0 >= setpoint 50.0
acpi_tz0: _AC1: temperature 66.0 >= setpoint 60.0
acpi_tz0: switched from NONE to _AC1: 66.0C
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ahcich0: AHCI reset...
ahcich0: SATA connect time=100us status=00000123
ahcich0: AHCI reset: device found
ahcich1: AHCI reset...
ahcich1: SATA connect timeout time=10000us status=00000000
ahcich1: AHCI reset: device not found
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x10000
battery0: battery initialization start
battery1: battery initialization start
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_tz0: _AC3: temperature 66.0 >= setpoint 40.0
acpi_tz0: _AC2: temperature 66.0 >= setpoint 50.0
acpi_tz0: _AC3: temperature 66.0 >= setpoint 40.0
acpi_tz0: _AC2: temperature 66.0 >= setpoint 50.0
battery0: battery initialization done, tried 1 times
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
ahcich0: AHCI reset: device ready after 400ms
ahcich0: Poll timeout on slot 0 port 0
ahcich0: is 00000000 cs 00000001 ss 00000000 rs 00000001 tfd 150 serr 00000000 cmd 00002007
(aprobe0:ahcich0:0:0:0): SOFT_RESET. ACB: 00 00 00 00 00 00 00 00 00 00 00 00
(aprobe0:ahcich0:0:0:0): CAM status: Command timeout
(aprobe0:ahcich0:0:0:0): Error 5, Retries exhausted
acpi_tz0: _AC3: temperature 68.0 >= setpoint 40.0
acpi_tz0: _AC2: temperature 68.0 >= setpoint 50.0
pass0 at ata0 bus 0 scbus2 target 0 lun 0
pass0: <TEAC DV-W28E-R C.B0> Removable CD-ROM SCSI-0 device
pass0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0 at ata0 bus 0 scbus2 target 0 lun 0
cd0: <TEAC DV-W28E-R C.B0> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: cd present [350977 x 2048 byte records]
GEOM: new disk cd0
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 1 vector 48
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 1 vector 49
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 50
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 1 vector 51
msi: Assigning MSI IRQ 256 to local APIC 1 vector 52
TSC timecounter discards lower 7 bit(s)
Timecounter "TSC-low" frequency 15586345 Hz quality -100
Root mount waiting for: usbus5
uhub5: 10 ports with 10 removable, self powered
Root mount waiting for: usbus5
ugen0.2: <Broadcom Corp> at usbus0
ugen5.2: <Generic> at usbus5
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2> on usbus5
umass0: SCSI over Bulk-Only; quirks = 0x4001
umass0:4:0:-1: Attached to scbus4
Trying to mount root from cd9660:/dev/iso9660/FREEBSD_INSTALL [ro]...
(probe0:umass-sim0:0:0:0): Down reving Protocol Version from 2 to 0?
pass1 at umass-sim0 bus 0 scbus4 target 0 lun 0
pass1: <Multi Flash Reader 1.00> Removable Direct Access SCSI-0 device
pass1: Serial Number 058F0O1111B1
pass1: 40.000MB/s transfers
GEOM: new disk da0
da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
da0: <Multi Flash Reader 1.00> Removable Direct Access SCSI-0 device
da0: Serial Number 058F0O1111B1
da0: 40.000MB/s transfers
da0: 14MB (29120 512 byte sectors: 64H 32S/T 14C)
start_init: trying /sbin/init
acpi_tz0: _AC3: temperature 59.0 >= setpoint 40.0
acpi_tz0: _AC2: temperature 59.0 >= setpoint 50.0
acpi_tz0: switched from _AC1 to _AC2: 59.0C
acpi_tz0: _AC3: temperature 59.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 59.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 57.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 55.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 54.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 53.0 >= setpoint 40.0
battery1: battery initialization failed, giving up
ubt0: <Broadcom Corp HP Integrated Module, class 224/1, rev 2.00/1.00, addr 2> on usbus0
acpi_tz0: _AC3: temperature 54.0 >= setpoint 40.0
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
acpi_tz0: _AC3: temperature 55.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 56.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 56.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 56.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 56.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 56.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 57.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 56.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 57.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 57.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 57.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 57.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 57.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 57.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 57.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 57.0 >= setpoint 40.0
pciconf.9.0.txt
(text/plain, 9.5 KB)
lissyara@HP:/home/lissyara % su
root@HP:/home/lissyara # pciconf -lvcb
hostb0@pci0:0:0:0: class=0x060000 card=0x30c2103c chip=0x79101002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'RS690 Host Bridge'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:1:0: class=0x060400 card=0x30c2103c chip=0x79121002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc'
device = 'RS690 PCI to PCI Bridge (Internal gfx)'
class = bridge
subclass = PCI-PCI
cap 08[44] = HT MSI fixed address window enabled at 0xfee00000
cap 0d[b0] = PCI Bridge card=0x30c2103c
pcib2@pci0:0:4:0: class=0x060400 card=0x30c2103c chip=0x79141002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc'
class = bridge
subclass = PCI-PCI
cap 01[50] = powerspec 3 supports D0 D3 current D0
cap 10[58] = PCI-Express 1 root port max data 128(128) link x1(x1)
cap 05[80] = MSI supports 1 message
cap 0d[b0] = PCI Bridge card=0x30c2103c
cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
ecap 0002[100] = VC 1 max VC0
pcib3@pci0:0:5:0: class=0x060400 card=0x30c2103c chip=0x79151002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc'
device = 'RS690 PCI to PCI Bridge (PCI Express Port 1)'
class = bridge
subclass = PCI-PCI
cap 01[50] = powerspec 3 supports D0 D3 current D0
cap 10[58] = PCI-Express 1 root port max data 128(128) link x16(x1)
cap 05[80] = MSI supports 1 message
cap 0d[b0] = PCI Bridge card=0x30c2103c
cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
ecap 0002[100] = VC 1 max VC0
pcib4@pci0:0:6:0: class=0x060400 card=0x30c2103c chip=0x79161002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc'
device = 'RS690 PCI to PCI Bridge (PCI Express Port 2)'
class = bridge
subclass = PCI-PCI
cap 01[50] = powerspec 3 supports D0 D3 current D0
cap 10[58] = PCI-Express 1 root port max data 128(128) link x1(x1)
cap 05[80] = MSI supports 1 message
cap 0d[b0] = PCI Bridge card=0x30c2103c
cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000
ecap 0002[100] = VC 1 max VC0
ahci0@pci0:0:18:0: class=0x01018f card=0x43801002 chip=0x43801002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB600 Non-Raid-5 SATA'
class = mass storage
subclass = ATA
bar [10] = type I/O Port, range 32, base 0x9000, size 8, enabled
bar [14] = type I/O Port, range 32, base 0x9008, size 4, enabled
bar [18] = type I/O Port, range 32, base 0x9010, size 8, enabled
bar [1c] = type I/O Port, range 32, base 0x5018, size 4, enabled
bar [20] = type I/O Port, range 32, base 0x5020, size 16, enabled
bar [24] = type Memory, range 32, base 0xd0409000, size 1024, enabled
cap 01[60] = powerspec 2 supports D0 D3 current D0
ohci0@pci0:0:19:0: class=0x0c0310 card=0x30c2103c chip=0x43871002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB600 USB (OHCI0)'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xd0401000, size 4096, enabled
ohci1@pci0:0:19:1: class=0x0c0310 card=0x30c2103c chip=0x43881002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB600 USB (OHCI1)'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xd0402000, size 4096, enabled
ohci2@pci0:0:19:2: class=0x0c0310 card=0x30c2103c chip=0x43891002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB600 USB (OHCI2)'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xd0403000, size 4096, enabled
ohci3@pci0:0:19:3: class=0x0c0310 card=0x30c2103c chip=0x438a1002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB600 USB (OHCI3)'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xd0404000, size 4096, enabled
ohci4@pci0:0:19:4: class=0x0c0310 card=0x30c2103c chip=0x438b1002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB600 USB (OHCI4)'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xd0405000, size 4096, enabled
ehci0@pci0:0:19:5: class=0x0c0320 card=0x30c2103c chip=0x43861002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB600 USB Controller (EHCI)'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xd0406000, size 256, enabled
cap 01[c0] = powerspec 2 supports D0 D1 D2 D3 current D0
cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14
none0@pci0:0:20:0: class=0x0c0500 card=0x30c2103c chip=0x43851002 rev=0x14 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SBx00 SMBus Controller'
class = serial bus
subclass = SMBus
bar [10] = type I/O Port, range 32, base 0x8200, size 16, enabled
cap 08[b0] = HT MSI fixed address window disabled at 0xfee00000
atapci0@pci0:0:20:1: class=0x010182 card=0x30c2103c chip=0x438c1002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB600 IDE'
class = mass storage
subclass = ATA
bar [20] = type I/O Port, range 32, base 0x5040, size 16, enabled
hdac0@pci0:0:20:2: class=0x040300 card=0x30c2103c chip=0x43831002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SBx00 Azalia (Intel HDA)'
class = multimedia
subclass = HDA
bar [10] = type Memory, range 64, base 0xc8100000, size 16384, enabled
cap 01[50] = powerspec 2 supports D0 D3 current D0
isab0@pci0:0:20:3: class=0x060100 card=0x30c2103c chip=0x438d1002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'SB600 PCI to LPC Bridge'
class = bridge
subclass = PCI-ISA
pcib5@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc'
device = 'SBx00 PCI to PCI Bridge'
class = bridge
subclass = PCI-PCI
hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration'
class = bridge
subclass = HOST-PCI
cap 08[80] = HT host
hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'K8 [Athlon64/Opteron] Address Map'
class = bridge
subclass = HOST-PCI
hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'K8 [Athlon64/Opteron] DRAM Controller'
class = bridge
subclass = HOST-PCI
hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'K8 [Athlon64/Opteron] Miscellaneous Control'
class = bridge
subclass = HOST-PCI
cap 0f[f0] = unknown
vgapci0@pci0:1:5:0: class=0x030000 card=0x30c2103c chip=0x791f1002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc'
device = 'RS690M [Radeon X1200 Series]'
class = display
subclass = VGA
bar [10] = type Prefetchable Memory, range 64, base 0xc0000000, size 134217728, enabled
bar [18] = type Memory, range 64, base 0xd0200000, size 65536, enabled
bar [20] = type I/O Port, range 32, base 0x4000, size 256, enabled
bar [24] = type Memory, range 32, base 0xd0300000, size 1048576, enabled
cap 01[50] = powerspec 2 supports D0 D1 D2 D3 current D0
cap 05[80] = MSI supports 1 message, 64 bit enabled with 1 message
bge0@pci0:16:0:0: class=0x020000 card=0x30c2103c chip=0x171314e4 rev=0x02 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetLink BCM5906M Fast Ethernet PCI Express'
class = network
subclass = ethernet
bar [10] = type Memory, range 64, base 0xd0000000, size 65536, enabled
cap 01[48] = powerspec 3 supports D0 D3 current D0
cap 03[50] = VPD
cap 09[58] = vendor (length 120)
cap 05[e8] = MSI supports 1 message, 64 bit enabled with 1 message
cap 10[d0] = PCI-Express 1 endpoint max data 128(128) link x1(x1)
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
ecap 0002[13c] = VC 1 max VC0
ecap 0003[160] = Serial 1 001f29fffe8938f3
siba_bwn0@pci0:48:0:0: class=0x028000 card=0x1371103c chip=0x431214e4 rev=0x02 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM4311 802.11a/b/g'
class = network
bar [10] = type Memory, range 64, base 0xc8000000, size 16384, enabled
cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 09[58] = vendor (length 120)
cap 05[e8] = MSI supports 1 message, 64 bit enabled with 1 message
cap 10[d0] = PCI-Express 1 endpoint max data 128(128) link x1(x1)
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected
ecap 0002[13c] = VC 1 max VC0
ecap 0003[160] = Serial 1 648f00ffff0a0021
ecap 0004[16c] = unknown 1
cbb0@pci0:2:4:0: class=0x060700 card=0x30c2103c chip=0x04761180 rev=0xb6 hdr=0x02
vendor = 'Ricoh Co Ltd'
device = 'RL5c476 II'
class = bridge
subclass = PCI-CardBus
bar [10] = type Memory, range 32, base 0xd0100000, size 4096, enabled
cap 01[dc] = powerspec 2 supports D0 D1 D2 D3 current D0
root@HP:/home/lissyara #