Re: ppc fails to attach to puc on 9.1-STABLE, 7.4-STABLE works

On Thursday, January 10, 2013 2:40:52 am Andre Albsmeier wrote:
> [Retrying here, maybe anyone can help...}
> 
> I want my printer port back on 9.1 ;-(
> 
> I have this card:
> 
> puc0@pci0:4:1:0:        class=0x078000 card=0x00121000 chip=0x98359710 
rev=0x01 hdr=0x00
>     vendor     = 'NetMos Technology'
>     device     = 'PCI 9835 Multi-I/O Controller'
>     class      = simple comms
> 
> It attached and worked under 7.4-STABLE (as long as I disabled
> the interrupt using hint.ppc.0.irq=""):
> 
> puc0: <NetMos NM9835 Dual UART and 1284 Printer port> port 
0xdf00-0xdf07,0xde00-0xde07,0xdd00-0xdd07
> ,0xdc00-0xdc07,0xdb00-0xdb07,0xda00-0xda0f irq 17 at device 1.0 on pci4
> puc0: [FILTER]
> uart0: <Non-standard ns8250 class UART with FIFOs> on puc0
> uart0: [FILTER]
> uart1: <Non-standard ns8250 class UART with FIFOs> on puc0
> uart1: [FILTER]
> ppc0: <Parallel port> on puc0
> ppc0: Generic chipset (ECP/EPP/PS2/NIBBLE) in ECP+EPP mode (EPP 1.9)
> ppbus0: <Parallel port bus> on ppc0
> lpt0: <Printer> on ppbus0
> lpt0: Polled port
> 
> 
> Under 9.1 the card does not attach the ppc anymore. The hint entries
> 
> hint.ppc.0.at=puc0
> hint.ppc.0.irq=""
> hint.ppc.0.flags=0x2F
> 
> get ignored and so it probes as ppc1 (failing due to the interrupt
> problem as it was in 7.4 without hints):
> 
> puc0: <NetMos NM9835 Dual UART and 1284 Printer port> port 
0xdf00-0xdf07,0xde00-0xde07,0xdd00-0xdd07
> ,0xdc00-0xdc07,0xdb00-0xdb07,0xda00-0xda0f irq 17 at device 1.0 on pci4
> uart2: <Non-standard ns8250 class UART with FIFOs> at port 1 on puc0
> uart3: <16550 or compatible> at port 2 on puc0
> ppc1: <Parallel port> at port 3 on puc0
> ppc1: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
> ppc1: failed to register interrupt handler: 6
> device_attach: ppc1 attach returned 6
> 
> Any ideas? How do I construct the hint entries under 9.1 so that
> 
> 1. it does not want to use the interrupt (which made it attach under 7.4)
> 2. it takes the flags 0x2F as it did before.
> 
> I have also never understood if ppc itself needs to attach to
> the irq as well (I thought this all would be handled by puc).

Well, ppc wants to use puc's interrupt, and it should be finding puc's 
interrupt.  Ah, I think I found the bug.  Try this patch to sys/dev/puc/puc.c:

Index: puc.c
===================================================================
--- puc.c	(revision 245225)
+++ puc.c	(working copy)
@@ -622,7 +628,7 @@ puc_bus_setup_intr(device_t dev, device_t child, s
 	if (cookiep == NULL || res != port->p_ires)
 		return (EINVAL);
 	/* We demand that serdev devices use filter_only interrupts. */
-	if (ihand != NULL)
+	if (port->p_type == PUC_TYPE_SERIAL && ihand != NULL)
 		return (ENXIO);
 	if (rman_get_device(port->p_ires) != originator)
 		return (ENXIO);

This should let your ppc device re-use IRQ 17 from your puc device.

-- 
John Baldwin
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to "[email protected]"