Re: no IPMI on identical box

so 2.23 is the current firmware, bur you are running 1.54? Time for 
update, I guess.

Perhaps it is still accessible via network.

Regards,
  Michael!


On 18/09/2018 18:08, Axel Rau wrote:
> 
> 
>> Am 18.09.2018 um 17:46 schrieb Mike Tancsa <[email protected]>:
>>
>>
>> Take it out of /boot/loader.conf
>> and after the box boots up try
>>
>> sysctl -w debug.bootverbose=1
>> kldload -v ipmi
>>
>> and paste the output here.
> [bh3:~] root# sysctl -w debug.bootverbose=1
> debug.bootverbose: 0 -> 1
> [bh3:~] root# kldload -v ipmi
> Loaded ipmi, id=8
> [bh3:~] root# ls -l /dev/ip*
> ls: No match.
> 
>>
>> If still nothing, I would have a look through the BIOS options to see if
>> its somehow disabled, or try reflashing the BIOS.
> I will do that.
>>   Is the IPMI
>> integrated onto the motherboard or is it an additional card that is added ?
> 
> Integrated. See
> 	https://www.supermicro.com/products/motherboard/Atom/X10/A1SAi-2550F.cfm
> 
> Axel
> ---
> PGP-Key:29E99DD6  ☀  computing @ chaos claudius
> 
> _______________________________________________
> [email protected] mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-hardware
> To unsubscribe, send any mail to "[email protected]"
> 

_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to "[email protected]"