Re: no IPMI on identical box

Michael Fuckner <[email protected]> Wed, 19 Sep 2018 13:22:18 +0200

Newsgroups	gmane.os.freebsd.devel.hardware
Message-ID	<[email protected]>

On 9/19/18 12:52 PM, Axel Rau wrote:
> Helle Michael,
> 
>> Am 18.09.2018 um 20:23 schrieb Michael Fuckner <[email protected]>:
>>
>> so 2.23 is the current firmware, bur you are running 1.54? Time for update, I guess.
> You mean bios firmware?
> It says:
> 	Version: 1.0c
> 	BIOS Revision: 5.6
Bios Revision is currently 2.1, yours is at 1.0c, but this won't change 
IPMI behavior

this was in dmesg:
ipmi0: IPMI device rev. 1, firmware rev. 1.54, version 2.0

looks like protocol 2.0, Firmware Rev 1.54

>> Perhaps it is still accessible via network.
> 
> No. So I need a DOS floppy?
First try powercycle and remote access. Heartbeat LED should be blinking 
every second. If not, perhaps DOS still works, but it may also be dead.

Regards,
  Michael!
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-hardware
To unsubscribe, send any mail to "[email protected]"