Re: LSI/AVGO/Broadcom 9280-16i4e support?
Josh Paetzel <[email protected]> Mon, 2 Sep 2019 18:25:54 -0500
| Newsgroups | gmane.os.freebsd.devel.hardware |
|---|---|
| Message-ID | <[email protected]> |
> On Sep 1, 2019, at 4:03 PM, Karl Denninger <[email protected]> wrote: > >> On 9/1/2019 15:17, Chris wrote: >> Hello all, >> I recently picked up an LSI/AVGO/Broadcom 9280-16i4e card with >> the intent of flashing it to IT mode (pass through). So as to >> use it in one of my servers. >> However; looking through the Hardware (support) section of the >> release notes for 12; the closest I found was the 9260. >> Does anyone have any experience with the 9280-16i4e on FreeBSD? >> Does it work? Well? If not, anytime soon? >> >> Thank you very much. >> >> Chris >> > It will PROBABLY work. > > From Avago: http://www.ssdworks.com/MegaRAID-SAS-9280-16i4e.asp > > LSISAS2108 6Gb/s RAID-on-Chip > > From the driver in sys/dev/mps for 12-STABLE at present: > > mps_pci.c: { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_1, > mps_pci.c: 0xffff, 0xffff, 0, "Avago Technologies (LSI) SAS2108" }, > mps_pci.c: { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_2, > mps_pci.c: 0xffff, 0xffff, 0, "Avago Technologies (LSI) SAS2108" }, > mps_pci.c: { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_3, > mps_pci.c: 0xffff, 0xffff, 0, "Avago Technologies (LSI) SAS2108" }, > > I wouldn't call this dispositive but it's easy enough to figure out > (stick it in a box and boot the install media; see if it shows up during > the probe.) > > -- > Karl Denninger > [email protected] <mailto:[email protected]> > /The Market Ticker/ > /[S/MIME encrypted email preferred]/ That card works on FreeBSD. I have personal experience with it. However flashing it to IT mode isn’t possible. That’s a RoC not an HBA. The closest you can get to pass through is a bunch of single drive RAID 0 disks with the caching disabled. Thanks, Josh Paetzel FreeBSD - The Power to Serve _______________________________________________ [email protected] mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "[email protected]"