OZ

Hi...

Nothing good... ;(

pccardc enabler 1 sio1 -m 2000 dc000 16 -a 2f8 -i 4  :
sio1 at port 0x2f8-0x2ff iomem 0xdc000-0xdffff irq 4 slot 1 on pccard1
sio1: type 16550A with a bogus IIR_TXRDY register
sio1: unable to activate interrupt in fast mode - using normal mode

but when use this sio computer freeze...

pccardc rdreg :
Registers for slot 0
00: 82 33 00 10 00 08 00 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 44 00 00 00 00 00 00 00 8f 00
30: 00 00 00 00 00 00 00 00 00 00 00 42 18 00 1a 00
Registers for slot 1
00: 82 7f d1 70 00 08 61 02 f8 02 ff 02 00 00 00 00
10: dc 80 df 00 26 3f 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 44 00 00 00 00 00 00 00 8f 00
30: 00 00 00 00 00 00 00 00 00 00 50 42 18 00 1a 00

that else I will try? with kernel 4.3 - same problem...

tnx...

Val

MWL> OK.  I've been helping sobomax on a similar problem.  Can you provide
MWL> the following:

MWL> pccardc rdregs

MWL> Also, the "cannot allocate memory" is a big, red flag that something
MWL> serious is going wrong.  You may need to set pccard_memory to
MWL> something other than the default (try 0xd0000, 0xd4000, 0xd8000 and
MWL> 0xdc000).

MWL> Warner


To Unsubscribe: send mail to [email protected]
with "unsubscribe freebsd-mobile" in the body of the message