Re: Linksys pcmcia wlan on IBM laptop

Thank you for your help. Still, I have no idea how to fix this memory
range issue (I'm fairly new to freeBSD).

Here is my dmesg output:



Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Sun May  8 10:21:06 UTC 2005
    [email protected]:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Celeron (179.92-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
 
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 134152192 (127 MB)
avail memory = 121626624 (115 MB)
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x18, GLK> port 0x66,0x62 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <multimedia, audio> at device 0.1 (no driver attached)
pci0: <old, non-VGA display device> at device 0.2 (no driver attached)
cbb0: <TI1410 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at
device 2.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fxp0: <Intel 82559ER Pro/100 Ethernet> port 0x1840-0x187f mem
0xfc000000-0xfc01ffff,0xfc020000-0xfc020fff irq 11 at device 3.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:10:a4:86:79:c2
pci0: <simple comms, UART> at device 3.1 (no driver attached)
pci0: <display, VGA> at device 4.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port
0x1890-0x189f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82443MX USB controller> port 0x18a0-0x18bf irq 11 at
device 7.2 on pci0
usb0: <Intel 82443MX USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge> at device 7.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2
on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
ppc0: <Standard parallel printer port> port 0x3bc-0x3bf irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
orm0: <ISA Option ROMs> at iomem 0xdc000-0xdffff,0xd0000-0xd17ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 179921409 Hz quality 800
Timecounters tick every 10.000 msec
cardbus0: Expecting link target, got 0x71
cardbus0: Resource not specified in CIS: id=10, size=2000
cardbus0: Resource not specified in CIS: id=14, size=20000
cardbus0: <network> at device 0.0 (no driver attached)
ad0: 19077MB <IBM-DJSA-220/JS4IAC1A> [41344/15/63] at ata0-master UDMA33
acd0: CDROM <CD-224E/2.7B> at ata0-slave PIO4
Mounting root from ufs:/dev/ad0s2a


Regards,
Jure






>In message: <[email protected]>
>            Jure Lozar <[email protected]> writes:
>: I read instructions on links below, added hw.pci.allow_unsupported_io_range=1 to /boot/loader.conf
>
>This option is a nop in 5.4.
>
>: cardbus0: Expecting link target, got 0x71
>: cardbus0: Resource not specified in CIS: id=10, size=2000
>: cardbus0: Resource not specified in CIS: id=14, size=20000
>
>These indicate that there might be some minor problem with resources.
>Or maybe some major problems.  However, without the rest of the boot
>messages, it is impossible to say.  The memory range looks pretty
>bogus:
>
>: cbb0: <TI1410 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 2.0
>:  on pci0
>: cbb0: Found memory at 50000000
>
>You'll have to fix that first...  I've never seen a machine where this
>address works...
>
>Warner
>
>  
>
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"