Re: sprintpcs treo 650 & blutooth & dialup networking

Maksim Yevmenkin <[email protected]>
Newsgroups gmane.os.freebsd.devel.mobile
Message-ID <[email protected]>
> > i'm not exactly sure how this work in your case (never had a cdma
> > phone :) you need to have some sort of wireless internet access plan
> > activated on your phone.  you will probably use 1xRTT (instead of
> > gprs) on cdma network. you also need to make sure that wireless
> > internet access plan you have allows you to use your treo as wireless
> > modem. in other words you need to make sure that access point you are
> > connecting to talk ppp and ip and not wap/whatever. then you will need
> > to use something called "bluetooth dun profile" on treo (and
> > rfcomm_pppd(8) on pc).
> >
> > it seems earlier versions of treo shipped to sprint pcs have bluetooth
> > dun profile disabled. you need to check with sprint and make sure your
> > treo supports it - you may need firmware upgrade.
> 
> I have the firmware upgrade that does DUN.
> 
> # sdpcontrol -a mytreo search DUN
> 
> Record Handle: 0x00010001
> Service Class ID List:
>         Dial-Up Networking (0x1103)
> Protocol Descriptor List:
>         L2CAP (0x0100)
>         RFCOMM (0x0003)
>                 Protocol specific parameter #1: u/int8/bool 1

looks fine to me.

> Here is what I use to connect to the net via the treo
> 
> rfcomm_pppd -a mytreo -c -C dun -d -l rfcomm-dialup
> 
> [mytreo has an entry in /etc/bluetooth/hosts]
> 
> My ppp.conf script is pretty much the same as yours (except
> that right now I log everything but timer events).  From
> ppp.log I see that the phone does not respond to the initial
> AT<cr> with OK as it should.  So it seems the treo never
> really sees any communicaiton.

hmmm... strange... what freebsd version are you using (uname -a)? did
you try to use rfcomm_sppd(1)? something like

# rfcomm_sppd -a mytreo -c 1 -t /dev/ttyp1

then in another window 

# cu -l /dev/ttyp1

and try to type "AT" to see if the phone returns "OK" back?

note: you might need to try different tty number to find free one,
i.e. /dev/ttyp2, /dev/ttyp3 etc. tty name must match in both commands.

thanks,
max
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.