Re: Fwd: Adding new pccard device entries to FreeBSD 6, how?
John Baldwin <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
On Thursday 13 October 2005 02:06 pm, Nikolas Britton wrote: > ---------- Forwarded message ---------- > From: Nikolas Britton <[email protected]> > Date: Oct 13, 2005 1:38 AM > Subject: Adding new pccard device entries to FreeBSD 6, how? > To: FreeBSD-questions <[email protected]> > > > Hello all, > > I'm trying to get FreeBSD 6 working with my Prism 3 based SMC 2532W-B > wireless cards. I've added the device entries into the system but I > must be doing something wrong, it's still not working. The SMC2532W-B > cards are re-branded Zcom XI-330H (Prism 3) and XI-325H (Prism 2.5) > cards. I know for a fact that the SMC card works with FreeBSD 4.11, in > hostap mode, because I'm using one of them right now with the PLX PCI > to PCMCIA bridge controller that came with the old 3Com 3CRWE777A > wireless cards...... > > dmesg output: > cbb0: <RF5C475 PCI-CardBus Bridge> at device 2.0 on pci2 > cardbus0: <CardBus bus> on cbb0 > pccard0: <16-bit PCCard bus> on cbb0 > pccard0: <unknown card> (manufacturer=0xd601, product=0x0010, > function_type=6) at function 0 > pccard0: CIS info: SMC, SMC2532W-B EliteConnect Wireless Adapter, , > > -------------------------- > > /sys/dev/pccard/pccarddevs: > The vendor id matches ELSA (0xd601) so I added an entry to the ELSA > products section: > "product ELSA XI330_IEEE 0x0010 XI330 Wireless LAN" > > After that I added "PCMCIA_CARD(ELSA, XI330_IEEE)," to > /sys/dev/wi/if_wi_pccard.c > > I also added to /etc/pccard.conf: > # SMC's SMC2532W-B EliteConnect Wireless Adapter > card "SMC" "SMC2532W-B EliteConnect Wireless Adapter" > config auto "wi" ? > insert /etc/pccard_ether $device start > remove /etc/pccard_ether $device stop > > I read something about running "make -f Makefile.pccarddevs" but when > I run it it can't find the makefile.... I need help, thanks. You don't need to touch pccard.conf anymore, just the updates to pccarddevs and if_wi_pccard.c should be sufficient. -- John Baldwin <[email protected]> <>< http://www.FreeBSD.org/~jhb/ "Power Users Use the Power to Serve" = http://www.FreeBSD.org _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "[email protected]"