IBM T43 resume problems

I've got troubles with resuming on my IBM T43 laptop:
1) it slows down when resumed (slow typing)
2) console font is reseted
3) after halt(8) executed it becomes complete unusable

Here is a log:
Nov 12 01:47:09 solem acpi: suspend at 20051112 01:47:09
Nov 12 01:47:16 solem kernel: acpi_bus_number: can't get _ADR
Nov 12 01:47:16 solem kernel: acpi_bus_number: can't get _ADR
Nov 12 01:47:18 solem acpi: resumed at 20051112 01:47:18
Nov 12 01:48:00 solem kernel: ugen0: at uhub2 port 2 (addr 2) disconnected
Nov 12 01:48:00 solem kernel: All threads purged from ugen0.3
Nov 12 01:48:00 solem kernel: All threads purged from ugen0.2
Nov 12 01:48:00 solem kernel: All threads purged from ugen0.1
Nov 12 01:48:00 solem kernel: All threads purged from ugen0
Nov 12 01:48:00 solem kernel: ugen0: detached
Nov 12 01:48:55 solem kernel: ugen0: STMicroelectronics Biometric 
Coprocessor, rev 1.00/0.01, addr 2

Here is dmesg:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD 7.0-CURRENT #11: Sat Nov 12 00:27:37 MSK 2005
     [email protected]:/usr/obj/usr/src/sys/SOLEM
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.86GHz (1862.14-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8
 
Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
MOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
   Features2=0x180<EST,TM2>
   AMD Features=0x100000<NX>
real memory  = 1072562176 (1022 MB)
avail memory = 1040658432 (992 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM TP-1Y> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 11 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 11 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 11 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 11 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 11 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5751M Gigabit Ethernet, ASIC rev. 0x4101> mem 
0xa8200000-0xa8
20ffff irq 11 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
1000baseTX
-FDX, auto
bge0: Ethernet address: 00:11:25:af:be:d7
pcib3: <ACPI PCI-PCI bridge> irq 11 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 
0x1800-0x181f
irq 11 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 
0x1820-0x183f
irq 11 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 
0x1840-0x185f
irq 11 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 
0x1860-0x187f
irq 11 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 
0xa8000000-0xa80003ff irq 1
1 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xa8400000-0xa8400fff irq 11 at 
device 0.
0 on pci4
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xa8401000-0xa8401fff irq 11 at 
device
2.0 on pci4
iwi0: Ethernet address: 00:12:f0:1e:1e:5a
pcm0: <Intel ICH6 (82801FB)> port 0x1c00-0x1cff,0x1880-0x18bf mem 
0xa8000800-0xa
80009ff,0xa8000400-0xa80004ff irq 11 at device 30.2 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Analog Devices AD1981B AC97 Codec>
pci0: <simple comms, generic modem> at device 30.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 SATA150 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x37
6,0x18c0-0x18cf at device 31.2 on pci0
atapci0: failed to enable memory mapping!
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
ichsmb0: <SMBus controller> port 0x18e0-0x18ff irq 11 at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on 
acpi0
sio0: type 8250 or not responding
ppc0: <Standard parallel printer port> port 0x3bc-0x3be irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
orm0: <ISA Option ROMs> at iomem 0xd1800-0xd27ff,0xdc000-0xdffff pnpid 
ORM0000 o
n isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2
Timecounter Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding 
enabled, defau
lt to deny, logging unlimited
ad0: 38154MB <FUJITSU MHT2040AH 006C> at ata0-master UDMA100
acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4242N/0201> at ata1-master UDMA33
"TSC" frequency 1862136310 Hz quality 800
Trying to mount root from ufs:/dev/ad0s1a


It's a freshest current (2005-11-11).
Thanks.
-- 
Sem.
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"