Re: pccards

"M. Warner Losh" <[email protected]>
Newsgroups gmane.os.freebsd.devel.mobile
Message-ID <[email protected]>
In message: <[email protected]>
            Patrick Bowen <[email protected]> writes:
: Robert Fitzpatrick wrote:
: >I am trying FreeBSD 6.0 on my laptop since reading of wireless
: >capabilities. I have a D-Link DWL-AG650 card and see the card below in
: >my /etc/defaults/pccard.conf:
: >
: ># D Link DWL-650 11Mbps WLAN Card
: >card "D" "Link DWL-650 11Mbps WLAN Card"
: >        config  auto "wi" ?
: >        insert  /etc/pccard_ether $device start
: >        remove  /etc/pccard_ether $device stop
: >
: >It is missing the AG, but so close I was hoping to get it going. I have
: >pccard_enable="YES" in my rc.conf and see the following in dmesg
: >whenever I plug in the card:
: >
: >cardbus1: <network, ethernet> at device 0.0 (no driver attached)
: >
: >I guess this means this card will not work? If so, anyone suggest a way
: >to get it working? I ask this because I found the following post that
: >sounds like someone did have theirs working, but I do not see an ath0:
: >
: >http://docs.freebsd.org/cgi/getmsg.cgi?fetch=265162+0
: >+archive/2004/freebsd-mobile/20040118.freebsd-mobile
: >
: >--
: >Robert
: >
: >_______________________________________________
: >[email protected] mailing list
: >http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
: >To unsubscribe, send any mail to "[email protected]"
: >
: >  
: >
: Hi Robert;
: 
: I'd suggest adding the "AG" in the appropriate place in pccard.conf and
: rebooting, and see what happens. I added an entry for my SMC2532W-B that
: was identical to the entry for the SMC2632, and have been using it
: without problems for the last year, in 4.7, 5.4, and -current.

pccard.conf is not used on 6.0.  Changing this file will have 0
effect, I can 100% guarantee it. :-)

Warner
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.