nVidia Go 6600 reboot (kernel panic?)

Peter Pentchev <[email protected]>
Newsgroups gmane.os.freebsd.devel.mobile
Message-ID <[email protected]> 
Hi,

I've got a nVidia GeForce Go 6600 on a Centrino chipset - and a weird
problem with it, too.  The X.org default driver does not recognize
the chipset and only gives me 640x480x24bit, which is... weird :)
With ports/x11/nvidia-driver I get the "real" resolutions, and along
with them a 100% reproducible reboot when I switch to a text console
and then back to X.  This smells of a kernel panic, but it does not
drop me into ddb (understandable), does not leave a crash dump or
anything...

Here's what pciconf -lv says:

hostb0@pci0:0:0:	class=0x060000 card=0x404717c0 chip=0x25908086 rev=0x04 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82915PM/GM/GMS, 82910GML Host Bridge'
    class    = bridge
    subclass = HOST-PCI
pcib1@pci0:1:0:	class=0x060400 card=0x00000088 chip=0x25918086 rev=0x04 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82915PM/GM PCI Express Graphics Port'
    class    = bridge
    subclass = PCI-PCI
pcib2@pci0:28:0:	class=0x060400 card=0x00000040 chip=0x26608086 rev=0x04 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801FB/FR/FW/FRW PCI Express Port 1'
    class    = bridge
    subclass = PCI-PCI
uhci0@pci0:29:0:	class=0x0c0300 card=0x10a517c0 chip=0x26588086 rev=0x04 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FB/FR/FW/FRW USB UHCI Controller'
    class    = serial bus
    subclass = USB
uhci1@pci0:29:1:	class=0x0c0300 card=0x10a517c0 chip=0x26598086 rev=0x04 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FB/FR/FW/FRW USB UHCI Controller'
    class    = serial bus
    subclass = USB
uhci2@pci0:29:2:	class=0x0c0300 card=0x10a517c0 chip=0x265a8086 rev=0x04 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FB/FR/FW/FRW USB UHCI Controller'
    class    = serial bus
    subclass = USB
uhci3@pci0:29:3:	class=0x0c0300 card=0x10a517c0 chip=0x265b8086 rev=0x04 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FB/FR/FW/FRW USB UHCI Controller'
    class    = serial bus
    subclass = USB
ehci0@pci0:29:7:	class=0x0c0320 card=0x10a617c0 chip=0x265c8086 rev=0x04 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FB/FR/FW/FRW USB 2.0 EHCI Controller'
    class    = serial bus
    subclass = USB
pcib3@pci0:30:0:	class=0x060401 card=0x00000050 chip=0x24488086 rev=0xd4 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge'
    class    = bridge
    subclass = PCI-PCI
pcm0@pci0:30:2:	class=0x040100 card=0x201617c0 chip=0x266e8086 rev=0x04 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FB/FR/FW/FRW AC '97 Audio Controller'
    class    = multimedia
    subclass = audio
none0@pci0:30:3:	class=0x070300 card=0x10ab17c0 chip=0x266d8086 rev=0x04 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FB/FR/FW/FRW AC '97 Modem Controller'
    class    = simple comms
    subclass = generic modem
isab0@pci0:31:0:	class=0x060100 card=0x404517c0 chip=0x26418086 rev=0x04 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FBM ICH6M LPC Interface Bridge'
    class    = bridge
    subclass = PCI-ISA
atapci0@pci0:31:2:	class=0x010180 card=0x404217c0 chip=0x26538086 rev=0x04 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FBM ICH6M SATA Controller'
    class    = mass storage
    subclass = ATA
none1@pci0:31:3:	class=0x0c0500 card=0x404117c0 chip=0x266a8086 rev=0x04 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801FB/FR/FW/FRW SMBus Controller'
    class    = serial bus
    subclass = SMBus
none2@pci1:0:0:	class=0x030000 card=0x207317c0 chip=0x014810de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = display
    subclass = VGA
iwi0@pci6:5:0:	class=0x028000 card=0x10018086 chip=0x42238086 rev=0x05 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = 'PRO/Wireless 2915ABG MiniPCI Adapter'
    class    = network
re0@pci6:7:0:	class=0x020000 card=0x109417c0 chip=0x816910ec rev=0x10 hdr=0x00
    vendor   = 'Realtek Semiconductor'
    device   = 'RTL8169 Gigabit Ethernet Adapter'
    class    = network
    subclass = ethernet
none3@pci6:9:0:	class=0x060700 card=0x300717c0 chip=0x8031104c rev=0x00 hdr=0x02
    vendor   = 'Texas Instruments (TI)'
    class    = bridge
    subclass = PCI-CardBus
none4@pci6:9:2:	class=0x0c0010 card=0x300717c0 chip=0x8032104c rev=0x00 hdr=0x00
    vendor   = 'Texas Instruments (TI)'
    class    = serial bus
    subclass = FireWire
none5@pci6:9:3:	class=0x018000 card=0x300717c0 chip=0x8033104c rev=0x00 hdr=0x00
    vendor   = 'Texas Instruments (TI)'
    device   = 'PCIxx21 Integrated FlashMedia Controller'
    class    = mass storage
none6@pci6:9:4:	class=0x080500 card=0x300717c0 chip=0x8034104c rev=0x00 hdr=0x00
    vendor   = 'Texas Instruments (TI)'
    class    = base peripheral

And here's dmesg -a:

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.4-STABLE #0: Wed Nov 16 15:42:49 EET 2005
    [email protected]:/fs/5/usr.obj/fs/5/usr.src/sys/STRAYLIGHT
WARNING: WITNESS option enabled, expect reduced performance.
WARNING: DIAGNOSTIC option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.73GHz (1729.06-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 8
  Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
real memory  = 1072562176 (1022 MB)
avail memory = 1040035840 (991 MB)
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD Wistron> on motherboard
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x66,0x62 on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (4 Cx states)> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 10 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 11 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pci0: <serial bus, USB> at device 29.3 (no driver attached)
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
ACPI link \\_SB_.PCI0.LPCB.LNKG has invalid initial irq 10, ignoring
pci6: <ACPI PCI bus> on pcib3
pci6: <network> at device 5.0 (no driver attached)
re0: <RealTek 8169SB Single-chip Gigabit Ethernet> port 0x3000-0x30ff mem 0xb0007000-0xb00070ff irq 10 at device 7.0 on pci6
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
re0: Ethernet address: 00:0a:e4:ab:65:9c
pci6: <bridge, PCI-CardBus> at device 9.0 (no driver attached)
pci6: <serial bus, FireWire> at device 9.2 (no driver attached)
pci6: <mass storage> at device 9.3 (no driver attached)
pci6: <base peripheral> at device 9.4 (no driver attached)
pcm0: <Intel ICH6 (82801FB)> port 0x1880-0x18bf,0x1c00-0x1cff mem 0x80000400-0x800004ff,0x80000800-0x800009ff irq 10 at device 30.2 on pci0
pcm0: <Avance Logic ALC655 AC97 Codec>
pci0: <simple comms, generic modem> at device 30.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 SATA150 controller> port 0x18e0-0x18ef,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.2 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
orm0: <ISA Option ROM> at iomem 0xd8000-0xdbfff on isa0
pmtimer0 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounter "TSC" frequency 1729056654 Hz quality 800
Timecounters tick every 10.000 msec
Expensive timeout(9) function: 0xc050c9e0(0) 0.003387860 s
ad0: 76319MB <HTS541080G9SA00/MB4OC60D> [155061/16/63] at ata0-master SATA150
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
acd0: DVDR <AOPEN DVD RW ISU8424E/1.10> at ata1-master PIO4
pass0 at ata1 bus 0 target 0 lun 0
pass0: <AOPEN DVD RW ISU8424E 1.10> Removable CD-ROM SCSI-0 device 
pass0: 16.000MB/s transfers
Mounting root from ufs:/dev/ad0s1a
Pre-seeding PRNG:
 kickstart
.
Loading configuration files.
Entropy harvesting:
 interrupts
 ethernet
 point_to_point
 kickstart
.
kernel dumps on /dev/ad0s2b
swapon: adding /dev/ad0s2b as swap device
Starting file system checks:
/dev/ad0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1a: clean, 157256 free (1272 frags, 19498 blocks, 0.5% fragmentation)
/dev/ad0s2a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s2a: clean, 2164604 free (62524 frags, 262760 blocks, 0.5% fragmentation)
/dev/ad0s2d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s2d: clean, 186472 free (816 frags, 23207 blocks, 0.3% fragmentation)
/dev/ad0s2g: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s2g: clean, 77319 free (1391 frags, 9491 blocks, 0.3% fragmentation)
/dev/ad0s2e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s2e: clean, 62199 free (175 frags, 7753 blocks, 0.1% fragmentation)
/dev/ad0s2h: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s2h: clean, 30632 free (3760 frags, 3359 blocks, 0.7% fragmentation)
/dev/ad0s2f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s2f: clean, 154323 free (1515 frags, 19101 blocks, 0.6% fragmentation)
net.inet6.ip6.auto_linklocal: 
1
 -> 
0

net.inet6.ip6.v6only: 
1
 -> 
0

Setting hostname: straylight.m.ringlet.net.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
	inet 127.0.0.1 netmask 0xff000000 
	inet6 ::1 prefixlen 128 
	inet 127.0.0.2 netmask 0xffffffff 
	inet 192.168.1.13 netmask 0xffffff00 
Starting dhclient.
Expensive timeout(9) function: 0xc05e8da0(0) 0.003527822 s
Expensive timeout(9) function: 0xc047a800(0xc235a000) 0.003799085 s
Script /etc/rc.d/dhclient interrupted
Additional routing options:
 IP gateway=YES
.
Starting devd.
hw.acpi.cpu.cx_lowest: 
C1
 -> 
C1

dev.cpu.0.freq: 
1734
 -> 
1734

Mounting NFS file systems:
.
Starting syslogd.
Checking for core dump on /dev/ad0s2b...
savecore: no dumps found
Starting rpcbind.
NFS access cache time=2
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
Starting mountd.
Starting nfsd.
Starting statd.
Starting lockd.
Starting usbd.
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0
uhci0: LegSup = 0x1f30
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0
uhci1: LegSup = 0x0f10
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0
uhci2: LegSup = 0x0f10
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1860-0x187f irq 11 at device 29.3 on pci0
uhci3: LegSup = 0x0f10
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0x80000000-0x800003ff irq 11 at device 29.7 on pci0
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
Starting local daemons:
.
Starting ntpd.
Configuring syscons:
 keymap
 keyrate
 alt_is_meta
 font8x16
 font8x14
 font8x8
 blanktime
 screensaver
.
Starting sshd.
Initial i386 initialization:
.
Additional ABI support:
 linux
/compat/linux/sbin/ldconfig: 
Can't remove old temporary cache file /etc/ld.so.cache~
: Read-only file system

.
Starting cron.
Local package initialization:
Starting svscan.
 
tomcat41
Starting apache.
 (skipping dictd.sh, not executable)
Setting the mixer cd from 100:100 to 100:100.
Setting the mixer pcm from 100:100 to 100:100.
Setting the mixer vol from 100:100 to 100:100.
Setting the mixer speaker from 0:0 to 0:0.
Starting mysql.
Starting SAMBA: removing stale tdbs :
Starting nmbd.
Starting smbd.
Starting stunnel.
.
Additional TCP options:
.
Starting moused:
 mousechar_start
Expensive timeout(9) function: 0xc06045e0(0xc06e6a20) 0.010120637 s
.
Starting inetd.
Starting background file system checks in 60 seconds.

Fri Nov 25 14:35:46 CET 2005

G'luck,
Peter

-- 
Peter Pentchev	[email protected]    [email protected]    [email protected]
PGP key:	http://people.FreeBSD.org/~roam/roam.key.asc
Key fingerprint	FDBA FD79 C26F 3C51 C95E  DF9E ED18 B68D 1619 4553
No language can express every thought unambiguously, least of all this one.
signature.asc (application/pgp-signature, 187 B) 
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (FreeBSD)

iD8DBQFDhzz+7Ri2jRYZRVMRAolhAJwIpsUXw8monRaCBWOc9jrCqIrdkACgghiz
ujZKG4alTW6/R6AkYEhI3ZM=
=iYrv
-----END PGP SIGNATURE-----
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.