Re: Still a brick

> On Tuesday 20 December 2005 10:58 am, Tuc at T-B-O-H wrote:
> > Hi,
> >
> >         I was trying to upgrade from 4.X to 5.4 and I bricked my
> > laptop...
> >
> >         When it boots, the last thing I see is :
> >
> > atapci0: <Intel PIIX4 UDMA33 controller> port
> > 0x376,0x170-0x177,0x3f6,0x1f0-0x1f 7 at device 5.1 on pci0
> > atapci0: Lazy allocation of 0x10 bytes rid 0x20 type 4 at 0
> > ata0: channel #0 on atapci0
> > atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
> > atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
> > ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00
> > ata0-master: stat=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00
> > ata0-slave:  stat=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00
> > ata0: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1<ATA_MASTER>
> > ata0: [MPSAFE]
> > ata1: channel #1 on atapci0
> > atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
> > atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
> >
> >
> >         I tried doing a safe boot, EISA setting off, etc.. No luck.
> > HELP!
> Have you tried to boot a 5.4 or 6.0 CD?  Do they exhibit the same
> problem?
> 
	I just tried a 5.4 Boot Only CD and it worked fine... So I'm
even more confused whats happening. 

		Thanks, Tuc
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"