Re: [ptmdm] - PCTel HSP MicroModem driver for FreeBSD
Watanabe Kazuhiro <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
Hi! At Wed, 15 Feb 2006 18:57:45 +0200, Oleksandr Tatmanyants wrote: > Feb 15 17:56:49 tats kernel: amrmdm0: <Intel ICH4> at device 31.6 on pci0 > Feb 15 17:56:49 tats kernel: amrmdm0: could not find ioport base reg. > Feb 15 17:56:49 tats kernel: device_attach: amrmdm0 attach returned 6 > > Here is scanpci -v > > pci bus 0x0000 cardnum 0x1f function 0x06: vendor 0x8086 device 0x24c6 > Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem > Controller (snip) > BASE0 0x00000001 addr 0x00000000 I/O > BASE1 0x00000001 addr 0x00000000 I/O It seems that the kernel does not allocate resources to the modem controller. I think it's not the driver's problem. I don't know what to do in this situation... but if available, try to set the BIOS parameter such as "PnP OS" to "No". The following is the result of my -current PC (for reference). | scorpio# pciconf -lv (snip) | none1@pci0:13:0: class=0x070300 card=0x0001134d chip=0x7891134d rev=0x02 hdr=0x00 | vendor = 'PCTEL Inc.' | device = 'PCT 789T HSP MicroModem 56' | class = simple comms | subclass = generic modem (snip) | scorpio# foreach i (0x10 0x14 0x18 0x1c 0x20 0x24) | foreach? echo -n "$i "; pciconf -r pci0:13:0 $i | foreach? end | 0x10 0000ec01 # BASE0 - I/O, addr=0xec00 | 0x14 00000000 # BASE1 | 0x18 00000000 # BASE2 | 0x1c 00000000 # BASE3 | 0x20 00000000 # BASE4 | 0x24 00000000 # BASE5 | scorpio# kldload ./ptmdm.ko | ptmdm0: <PCTel PCT789T> port 0xec00-0xec3f irq 12 at device 13.0 on pci0 | ptmdm0: [GIANT-LOCKED] | ptmdm0: type Virtual 16550A | scorpio# And I'm not familiar with ACPI, the following is a part of dmesg with verbose logging. | found-> vendor=0x134d, dev=0x7891, revid=0x02 | bus=0, slot=13, func=0 | class=07-03-00, hdrtype=0x00, mfdev=0 | cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords) | lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) | intpin=a, irq=12 | powerspec 2 supports D0 D2 D3 current D0 | map[10]: type 4, range 32, base 0000ec00, size 6, enabled | pcib0: matched entry for 0.13.INTA (src \\_SB_.PCI0.ISA_.LNKB:0) | pcib0: slot 13 INTA routed to irq 12 via \\_SB_.PCI0.ISA_.LNKB --- Watanabe Kazuhiro ([email protected]) _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "[email protected]"