Re: FreeBSD 6.1 on the ThinkPad X60s

Hi James.

I'm using X60s, too. (model 1702-23I) What do you use any X.org driver?
If you are using vesa driver, please try this patch to xorg-server.

http://www.alib.jp/files/patch-i945GM.txt


I was installed FreeBSD 7-CURRENT in apr 9 2006, but i810 driver
cannot find i945GM Express chip. But, this driver supports to i945G.
The patched X.org 6.9.0 server can find i945GM Express chip.


-- 
KONDOU, Kazuhiro @ Ancient library
site top URL : http://www.alib.jp/
mail address : [email protected]
fingerprint = 18CA 90A9 FDEE FBE1 F69A  D124 9F95 9289 E665 4D2B


On Tue, 09 May 2006 19:14:58 +0100
"James O'Gorman" <[email protected]> wrote:

> Hi all,
> 
> I just got my ThinkPad X60s (model 17045LG) and thought I'd post my
> results so people know what works and what doesn't.
> 
> Out of the box, the following works:
> 
> * Dual-core CPU
> * Builtin ethernet (em(4))
> * Internal and external displays
> * USB/Firewire
> * Mouse pointer (with moused)
> 
> It only works with >6.0 though. I tried installing 6.0-RELEASE and
> sysinstall couldn't even see the hard disk. 6.1-RC2 had no problem though.
> 
> Wireless does not, of course, work, as it's the Intel 3945ABG chip.
> Can't even get it working using if_ndis at the moment :-(
> 
> Not sure about bluetooth at the moment as I've never actually set it up
> in FreeBSD before anyway, so I might play with that.
> 
> It also crashes when you try and suspend. Well, suspend works, but when
> you come out of suspend everything goes boom.
> 
> The system speaker is also stupidly loud by default. Enabling
> acpi_ibm_load="YES" in /boot/loader.conf gives access to the
> dev.acpi_ibm.* sysctls, so you can sysctl dev.acpi_ibm.0.volume=1 :-)
> 
> James
> 
> === Begin dmesg output ===
> 
> Copyright (c) 1992-2006 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD 6.1-RELEASE #0: Tue May  9 18:33:30 BST 2006
>     [email protected]:/usr/obj/usr/src/sys/SMP
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Genuine Intel(R) CPU           L2400  @ 1.66GHz (1662.52-MHz
> 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x6e8  Stepping = 8
> 
> Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>   Features2=0xc1a9<SSE3,MON,VMX,EST,TM2,<b14>,<b15>>
>   AMD Features=0x100000<NX>
>   Cores per package: 2
> real memory  = 527237120 (502 MB)
> avail memory = 506363904 (482 MB)
> ACPI APIC Table: <LENOVO TP-7B   >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
> ioapic0: Changing APIC ID to 1
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> acpi0: <LENOVO TP-7B> on motherboard
> acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on acpi0
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi_bus_number: can't get _ADR
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> cpu0: <ACPI CPU> on acpi0
> acpi_throttle0: <ACPI CPU Throttling> on cpu0
> cpu1: <ACPI CPU> on acpi0
> acpi_throttle1: <ACPI CPU Throttling> on cpu1
> acpi_throttle1: failed to attach P_CNT
> device_attach: acpi_throttle1 attach returned 6
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_button0: <Sleep Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pci0: <display, VGA> at device 2.0 (no driver attached)
> pci0: <display> at device 2.1 (no driver attached)
> pci0: <multimedia> at device 27.0 (no driver attached)
> pcib1: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
> pci2: <ACPI PCI bus> on pcib1
> em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
> 0x2000-0x201f mem 0xee000000-0xee01ffff irq 16 at device 0.0 on pci2
> em0: Ethernet address: 00:16:d3:21:4c:29
> pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
> pci3: <ACPI PCI bus> on pcib2
> pci3: <network> at device 0.0 (no driver attached)
> pcib3: <ACPI PCI-PCI bridge> irq 22 at device 28.2 on pci0
> pci4: <ACPI PCI bus> on pcib3
> pcib4: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0
> pci12: <ACPI PCI bus> on pcib4
> uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 16 at
> device 29.0 on pci0
> uhci0: [GIANT-LOCKED]
> usb0: <UHCI (generic) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 17 at
> device 29.1 on pci0
> uhci1: [GIANT-LOCKED]
> usb1: <UHCI (generic) USB controller> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at
> device 29.2 on pci0
> uhci2: [GIANT-LOCKED]
> usb2: <UHCI (generic) USB controller> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 19 at
> device 29.3 on pci0
> uhci3: [GIANT-LOCKED]
> usb3: <UHCI (generic) USB controller> on uhci3
> usb3: USB revision 1.0
> uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem
> 0xee444000-0xee4443ff irq 19 at device 29.7 on pci0
> ehci0: [GIANT-LOCKED]
> usb4: EHCI version 1.0
> usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
> usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
> usb4: USB revision 2.0
> uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci21: <ACPI PCI bus> on pcib5
> cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xe4300000-0xe4300fff irq 16 at
> device 0.0 on pci21
> cardbus0: <CardBus bus> on cbb0
> pccard0: <16-bit PCCard bus> on cbb0
> fwohci0: <Ricoh R5C552> mem 0xe4301000-0xe43017ff irq 17 at device 0.1
> on pci21
> fwohci0: OHCI version 1.0 (ROM=0)
> fwohci0: No. of Isochronous channels is 4.
> fwohci0: EUI64 00:0a:e4:06:00:12:20:08
> fwohci0: Phy 1394a available S400, 2 ports.
> fwohci0: Link S400, max_rec 2048 bytes.
> firewire0: <IEEE1394(FireWire) bus> on fwohci0
> fwe0: <Ethernet over FireWire> on firewire0
> if_fwe0: Fake Ethernet address: 02:0a:e4:12:20:08
> fwe0: Ethernet address: 02:0a:e4:12:20:08
> fwe0: if_start running deferred for Giant
> sbp0: <SBP-2/SCSI over FireWire> on firewire0
> fwohci0: Initiate bus reset
> fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
> firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
> firewire0: bus manager 0 (me)
> pci21: <base peripheral> at device 0.2 (no driver attached)
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH7 UDMA100 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> atapci1: <Intel ICH7 SATA300 controller> port
> 0x18d0-0x18d7,0x18c4-0x18c7,0x18c8-0x18cf,0x18c0-0x18c3,0x18b0-0x18bf
> mem 0xee444400-0xee4447ff irq 16 at device 31.2 on pci0
> ata2: <ATA channel 0> on atapci1
> ata3: <ATA channel 1> on atapci1
> ata4: <ATA channel 2> on atapci1
> ata5: <ATA channel 3> on atapci1
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> acpi_tz0: <Thermal Zone> on acpi0
> acpi_tz1: <Thermal Zone> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model Generic PS/2 mouse, device ID 0
> sio0: configured irq 3 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> battery0: <ACPI Control Method Battery> on acpi0
> acpi_acad0: <AC Adapter> on acpi0
> acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0
> sio0: configured irq 3 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> pmtimer0 on isa0
> orm0: <ISA Option ROMs> at iomem
> 0xce800-0xcf7ff,0xcf800-0xd07ff,0xdc000-0xdffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 8250 or not responding
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> ugen0: STMicroelectronics Biometric Coprocessor, rev 1.00/0.01, addr 2
> Timecounters tick every 1.000 msec
> ad4: 76319MB <FUJITSU MHV2080BH 00840028> at ata2-master SATA150
> SMP: AP CPU #1 Launched!
> Trying to mount root from ufs:/dev/ad4s3a
> _______________________________________________
> [email protected] mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
> To unsubscribe, send any mail to "[email protected]"


_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"