IBM Microdrive 1GB -> Thinkpad 600

Shouldn't it work?  All I ever get is this:

Jul 16 00:28:35 charon pccardd[113]: No card in database for
"(null)"("(null)")

and this:

charon`~'112> pccardc dumpcis
Configuration data for card in slot 0
Tuple #1, code = 0xff (Terminator), length = 0

Any ideas?  Thanks in advance to anyone that can help...
(Below is some more info on my system.)

- Steve K.


charon`~'113> uname -a
FreeBSD charon.inside.killermartian.com 4.3-RELEASE FreeBSD
4.3-RELEASE #0: Mon Mar 18 21:11:35 EST 2002
stephenk@charon:/usr/obj/usr/src/sys/CHARON  i386

charon`~'114> dmesg (edited)
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (298.42-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2

Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 201129984 (196416K bytes)
avail memory = 192299008 (187792K bytes)
Preloaded elf kernel "kernel" at 0xc035c000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc035c09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on
motherboard
pci0: <PCI bus> on pcib0
pcic-pci0: <TI PCI-1250 PCI-CardBus Bridge> mem 0x20301000-0x20301fff
at device 2.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr
save][CSC parallel isa irq]
pcic-pci1: <TI PCI-1250 PCI-CardBus Bridge> mem 0x20300000-0x20300fff
at device 2.1 on pci0
pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr
save][CSC parallel isa irq]
pci0: <NeoMagic MagicGraph 128XD SVGA controller> at 3.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device
7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x8400-0x841f
irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0xefa0-0xefaf
at device 7.3 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: cannot reserve I/O port range
pcm0: <CS4236> at port 0x52c-0x533 irq 5 drq 1 flags 0xa110 on isa0
ad0: 4887MB <IBM-DADA-25120> [10592/15/63] at ata0-master UDMA33
acd0: CDROM <CRN-8241B> at ata1-master using PIO4



To Unsubscribe: send mail to [email protected]
with "unsubscribe freebsd-mobile" in the body of the message