Acer Aspire AS5672 - network card not properly detected

Torfinn Ingolfsen <[email protected]>
Newsgroups gmane.os.freebsd.devel.mobile
Message-ID <[email protected]> 
Hello,

I got a brand new laptop; an Acer Aspire AS5672WLMI. It has an
Intel Core Dua, 2GB memory and lots of good stuff. Network-wise it has
a Broadcom BCM5789 nic, and the wlan card is supposed to be an Intel
Pro/Wireless 3945ABG.

I have just finished installing FreeBSD 6.1-RELEASE on it.
Unfortunately, none of the network cards are properly detected. The
wlan card isn't reported in dmesg output at all.
I also tried a couple of PCcard nic's I have, but it seems that
the machine also have issues with those.

This leaves the machine offline, which is not good.

dmesg output and output from 'pciconf -lv' attached.

Any hints on what I can do to fix it so that I get the machine online
will be accepted gratefully.
-- 
Regards,
Torfinn Ingolfsen,
Norway

_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"
kg-home_dmesg_20060715.txt (text/plain, 16.5 KB) 
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE #0: Sun May  7 04:42:56 UTC 2006
    [email protected]:/usr/obj/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Genuine Intel(R) CPU           T2250  @ 1.73GHz (1733.41-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6e8  Stepping = 8
  Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xc189<SSE3,MON,EST,TM2,<b14>,<b15>>
  AMD Features=0x100000<NX>
  Cores per package: 2
real memory  = 2145910784 (2046 MB)
avail memory = 2094915584 (1997 MB)
ACPI APIC Table: <INTEL  CALISTGA>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <PTLTD   RSDT> on motherboard
    ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
    ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e000 StartNode 0xc642e000 ReturnNode 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
unknown: I/O range not supported
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib4
bge0: <Broadcom BCM5789 Gigabit Ethernet, ASIC rev. 0x4201> irq 18 at device 0.0 on pci4
bge0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffff).
bge0: couldn't map memory
device_attach: bge0 attach returned 6
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci5: <ACPI PCI bus> on pcib5
uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1820-0x183f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1860-0x187f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xc8004000-0xc80043ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ugen0: OEM Camera, rev 2.00/1.00, addr 2
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci10: <ACPI PCI bus> on pcib6
cbb0: <PCI-CardBus Bridge> mem 0xc8404000-0xc8404fff irq 20 at device 9.0 on pci10
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 0xc8405000-0xc84057ff,0xc8400000-0xc8403fff irq 20 at device 9.1 on pci10
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:c0:9f:00:00:9a:84:d3
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:c0:9f:9a:84:d3
fwe0: Ethernet address: 02:c0:9f:9a:84:d3
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci10: <mass storage> at device 9.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18b0-0x18bf at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sio0 port 0x2f8-0x2ff,0x6f8-0x6ff irq 3 drq 3 flags 0x10 on acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xdf800-0xdffff,0xe0000-0xe17ff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
    ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
Searad0: 114473MB <SAMSUNG HM120JI YF100-10> at ata0-master UDMA33
chNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc642e1a0), AE_NOT_FOUND
acd0: DVDR <MATSHITADVD-RAM UJ-845S/D201> at ata1-master UDMA33
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s3a
    ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc642e1a0), AE_NOT_FOUND
    ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc642e1a0), AE_NOT_FOUND
    ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc642e1a0), AE_NOT_FOUND
    ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc642e1a0), AE_NOT_FOUND
    ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc642e1a0), AE_NOT_FOUND
    ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc642e1a0), AE_NOT_FOUND
    ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc642e1a0), AE_NOT_FOUND
    ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc642e1a0), AE_NOT_FOUND
    ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc642e1a0), AE_NOT_FOUND
    ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc642e1a0), AE_NOT_FOUND
    ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc642e1a0), AE_NOT_FOUND
    ACPI-0438: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc642e2a0 StartNode 0xc642e2a0 ReturnNode 0
    ACPI-1304: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc642e1a0), AE_NOT_FOUND
ed1: <Billionton LNA-100B> at port 0x300-0x31f irq 20 function 0 config 7 on pccard0
ed1: ccr_write of 0 to 0xa (0x3c0)
ed1: ccr_write of 0x3 to 0xc (0x3c0)
ed1: ccr_write of 0x4 to 0x2 (0x3c0)
ed1: Ethernet address: 00:10:60:f3:31:04
ed1: type AX88790 (16 bit) 
miibus0: <MII bus> on ed1
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy1: <Generic IEEE 802.3u media interface> on miibus0
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy2: <Generic IEEE 802.3u media interface> on miibus0
ukphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy3: <Generic IEEE 802.3u media interface> on miibus0
ukphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy4: <Generic IEEE 802.3u media interface> on miibus0
ukphy4:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy5: <Generic IEEE 802.3u media interface> on miibus0
ukphy5:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy6: <Generic IEEE 802.3u media interface> on miibus0
ukphy6:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy7: <Generic IEEE 802.3u media interface> on miibus0
ukphy7:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy8: <Generic IEEE 802.3u media interface> on miibus0
ukphy8:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy9: <Generic IEEE 802.3u media interface> on miibus0
ukphy9:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy10: <Generic IEEE 802.3u media interface> on miibus0
ukphy10:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy11: <Generic IEEE 802.3u media interface> on miibus0
ukphy11:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy12: <Generic IEEE 802.3u media interface> on miibus0
ukphy12:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy13: <Generic IEEE 802.3u media interface> on miibus0
ukphy13:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy14: <Generic IEEE 802.3u media interface> on miibus0
ukphy14:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy15: <Generic IEEE 802.3u media interface> on miibus0
ukphy15:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy16: <Generic IEEE 802.3u media interface> on miibus0
ukphy16:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ed1: link state changed to DOWN
ukphy0: detached
ukphy1: detached
ukphy2: detached
ukphy3: detached
ukphy4: detached
ukphy5: detached
ukphy6: detached
ukphy7: detached
ukphy8: detached
ukphy9: detached
ukphy10: detached
ukphy11: detached
ukphy12: detached
ukphy13: detached
ukphy14: detached
ukphy15: detached
ukphy16: detached
miibus0: detached
ed1: detached
cardbus0: Resource not specified in CIS: id=14, size=80
cardbus0: Resource not specified in CIS: id=18, size=80
cbb alloc res fail
cardbus0: Can't get memory for IO ports
xl0: <3Com 3c575B Fast Etherlink XL> port 0-0x7f mem 0xc8407000-0xc840707f,0xc8408000-0xc840807f at device 0.0 on cardbus0
cbb alloc res fail
xl0: couldn't map ports/memory
device_attach: xl0 attach returned 6
ed1: <Billionton LNA-100B> at port 0x300-0x31f irq 20 function 0 config 7 on pccard0
ed1: ccr_write of 0 to 0xa (0x3c0)
ed1: ccr_write of 0x3 to 0xc (0x3c0)
ed1: ccr_write of 0x4 to 0x2 (0x3c0)
ed1: Ethernet address: 00:10:60:f3:31:04
ed1: type AX88790 (16 bit) 
miibus0: <MII bus> on ed1
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy1: <Generic IEEE 802.3u media interface> on miibus0
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy2: <Generic IEEE 802.3u media interface> on miibus0
ukphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy3: <Generic IEEE 802.3u media interface> on miibus0
ukphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy4: <Generic IEEE 802.3u media interface> on miibus0
ukphy4:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy5: <Generic IEEE 802.3u media interface> on miibus0
ukphy5:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy6: <Generic IEEE 802.3u media interface> on miibus0
ukphy6:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy7: <Generic IEEE 802.3u media interface> on miibus0
ukphy7:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy8: <Generic IEEE 802.3u media interface> on miibus0
ukphy8:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy9: <Generic IEEE 802.3u media interface> on miibus0
ukphy9:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy10: <Generic IEEE 802.3u media interface> on miibus0
ukphy10:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy11: <Generic IEEE 802.3u media interface> on miibus0
ukphy11:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy12: <Generic IEEE 802.3u media interface> on miibus0
ukphy12:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy13: <Generic IEEE 802.3u media interface> on miibus0
ukphy13:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy14: <Generic IEEE 802.3u media interface> on miibus0
ukphy14:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy15: <Generic IEEE 802.3u media interface> on miibus0
ukphy15:  10baseT, 10baseT-FDX, 100baseTX, 100baseT4, 1000baseSX-FDX, 1000baseT, 1000baseT-FDX
ukphy16: <Generic IEEE 802.3u media interface> on miibus0
ukphy16:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ed1: link state changed to DOWN
ukphy0: detached
ukphy1: detached
ukphy2: detached
ukphy3: detached
ukphy4: detached
ukphy5: detached
ukphy6: detached
ukphy7: detached
ukphy8: detached
ukphy9: detached
ukphy10: detached
ukphy11: detached
ukphy12: detached
ukphy13: detached
ukphy14: detached
ukphy15: detached
ukphy16: detached
miibus0: detached
ed1: detached
module_register: module bge/miibus already exists!
Module bge/miibus failed to register: 17
module_register: module pci/bge already exists!
Module pci/bge failed to register: 17
kg-home_pciconf.txt (text/plain, 4.4 KB) 
hostb0@pci0:0:0:	class=0x060000 card=0x00941025 chip=0x27a08086 rev=0x03 hdr=0x00
    vendor   = 'Intel Corporation'
    class    = bridge
    subclass = HOST-PCI
pcib1@pci0:1:0:	class=0x060400 card=0x00000088 chip=0x27a18086 rev=0x03 hdr=0x01
    vendor   = 'Intel Corporation'
    class    = bridge
    subclass = PCI-PCI
none0@pci0:27:0:	class=0x040300 card=0x00941025 chip=0x27d88086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) High Definition Audio'
    class    = multimedia
pcib2@pci0:28:0:	class=0x060400 card=0x00000040 chip=0x27d08086 rev=0x02 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) PCI Express Root Port'
    class    = bridge
    subclass = PCI-PCI
pcib3@pci0:28:1:	class=0x060400 card=0x00000040 chip=0x27d28086 rev=0x02 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) PCI Express Root Port'
    class    = bridge
    subclass = PCI-PCI
pcib4@pci0:28:2:	class=0x060400 card=0x00000040 chip=0x27d48086 rev=0x02 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) PCI Express Root Port'
    class    = bridge
    subclass = PCI-PCI
pcib5@pci0:28:3:	class=0x060400 card=0x00000040 chip=0x27d68086 rev=0x02 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) PCI Express Root Port'
    class    = bridge
    subclass = PCI-PCI
uhci0@pci0:29:0:	class=0x0c0300 card=0x00941025 chip=0x27c88086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) USB Universal Host Controller'
    class    = serial bus
    subclass = USB
uhci1@pci0:29:1:	class=0x0c0300 card=0x00941025 chip=0x27c98086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) USB Universal Host Controller'
    class    = serial bus
    subclass = USB
uhci2@pci0:29:2:	class=0x0c0300 card=0x00941025 chip=0x27ca8086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) USB Universal Host Controller'
    class    = serial bus
    subclass = USB
uhci3@pci0:29:3:	class=0x0c0300 card=0x00941025 chip=0x27cb8086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) USB Universal Host Controller'
    class    = serial bus
    subclass = USB
ehci0@pci0:29:7:	class=0x0c0320 card=0x00941025 chip=0x27cc8086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller'
    class    = serial bus
    subclass = USB
pcib6@pci0:30:0:	class=0x060401 card=0x00000050 chip=0x24488086 rev=0xe2 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge'
    class    = bridge
    subclass = PCI-PCI
isab0@pci0:31:0:	class=0x060100 card=0x00941025 chip=0x27b98086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801GBM (ICH7-M) LPC Interface Controller'
    class    = bridge
    subclass = PCI-ISA
atapci0@pci0:31:2:	class=0x010180 card=0x00941025 chip=0x27c48086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801GBM/GHM (ICH7-M Family) Serial ATA Storage Controller'
    class    = mass storage
    subclass = ATA
none1@pci0:31:3:	class=0x0c0500 card=0x00941025 chip=0x27da8086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) SMBus Controller'
    class    = serial bus
    subclass = SMBus
none2@pci1:0:0:	class=0x030000 card=0x00941025 chip=0x71c51002 rev=0x00 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    class    = display
    subclass = VGA
none3@pci3:0:0:	class=0x028000 card=0x10018086 chip=0x42228086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    class    = network
bge0@pci4:0:0:	class=0x020000 card=0x00941025 chip=0x169d14e4 rev=0x21 hdr=0x00
    vendor   = 'Broadcom Corporation'
    device   = 'BCM5789 NetLink Gigabit Ethernet PCI Express'
    class    = network
    subclass = ethernet
cbb0@pci10:9:0:	class=0x060700 card=0x00941025 chip=0x8039104c rev=0x00 hdr=0x02
    vendor   = 'Texas Instruments (TI)'
    class    = bridge
    subclass = PCI-CardBus
fwohci0@pci10:9:1:	class=0x0c0010 card=0x00941025 chip=0x803a104c rev=0x00 hdr=0x00
    vendor   = 'Texas Instruments (TI)'
    class    = serial bus
    subclass = FireWire
none4@pci10:9:2:	class=0x018000 card=0x00941025 chip=0x803b104c rev=0x00 hdr=0x00
    vendor   = 'Texas Instruments (TI)'
    class    = mass storage
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.