Re: Problem (maybe a solution) loading iwi firmware: firmware_get: failed to load firmware image iwi_bss
John Baldwin <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
On Saturday 29 July 2006 11:41, Erik Nørgaard wrote: > Sam Leffler wrote: > > It sounds like an irq routing problem. The device is assigned irq 10 > > but it appears interrupts are coming in on irq5. This would explain why > > you don't get notified the firmware bringup completed. I can't help w/ > > the interrupt problem. > > Ok, thanks for taking your time! 1) Can you try booting with ACPI enabled. 2) Try adding 'hw.pci6.0.10.INTA.irq=5' to /boot/loader.conf and seeing if that changes iwi0 to using IRQ 5 and fixes your problem. -- John Baldwin _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "[email protected]"