Re: Interrupt Storms on irq:11 with Tecra A4
Yousef Raffah <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Organization | The Savola Group |
| Message-ID | <[email protected]> |
Yousef Raffah wrote:
On Thu, 2006-07-06 at 07:57 -0400, John Baldwin wrote:
On Wednesday 05 July 2006 10:47, Yousef Raffah wrote:
On Tue, 2006-07-04 at 18:56 +0300, Yousef Raffah wrote:
On Tue, 2006-07-04 at 16:27 +0300, Yousef Raffah wrote:
I just updated my BIOS yesterday in order to test if my laptop will
"ever" work with ACPI under FreeBSD.
The test resulted in having interrupt storm on irq:11 whenever acpi is
enabled during the boot process. I have tried to disable apic from my
kernel but that didn't help, same results.
I know interrupt storms can be "ok" to ignore but I guess that is not an
option in my case as it is disabling my hard drive!
Googling for interrupt storm gave me results of people having the same
problem but I still can't find how to overcome this. Not sure if I can
get a dmesg output with the interrupt storm, any ideas?
Sorry for bothering everyone on the list with my problem but I really
need to get over this interrupt storm thing. Can someone at least tell
me what am I supposed to do (without flaming please :) ) in order to
overcome this?
I would have to have a verbose dmesg with ACPI enabled to have any hope of
trying to debug it. Unfortunately many laptops don't have serial ports to
use for a serial console nowadays. Does yours have a working serial port?
I don't have the DB9 port, it is a DB25 and I have a firewire port as
well, but I will see what I can do about it.
Updating to (7.0-CURRENT #1: Mon Jul 17 20:06:47 AST 2006) has a
working acpi on my laptop but the interrupt storm is still there. I
have included below a verbose dmesg with acpi enabled as per your
request. I would really appreciate any help you can offer :)
embedded   1   0  Â
BÂ = Â 0x61Â 5 9 10 11
embedded   1   0  Â
CÂ = Â 0x62Â 5 9 10 11
embedded   1   0  Â
DÂ = Â 0x63Â 5 9 10 11
embedded   2   0  Â
AÂ = Â 0x60Â 5 9 10 11
embedded   2   0  Â
BÂ = Â 0x61Â 5 9 10 11
embedded   2   0  Â
CÂ = Â 0x62Â 5 9 10 11
embedded   2   0  Â
DÂ = Â 0x63Â 5 9 10 11
embedded   3   0  Â
AÂ = Â 0x61Â 5 9 10 11
embedded   3   0  Â
BÂ = Â 0x62Â 5 9 10 11
embedded   3   0  Â
CÂ = Â 0x63Â 5 9 10 11
embedded   3   0  Â
DÂ = Â 0x60Â 5 9 10 11
embedded   4   0  Â
AÂ = Â 0x62Â 5 9 10 11
embedded   4   0  Â
BÂ = Â 0x63Â 5 9 10 11
embedded   4   0  Â
CÂ = Â 0x60Â 5 9 10 11
embedded   4   0  Â
DÂ = Â 0x61Â 5 9 10 11
embedded   5   0  Â
AÂ = Â 0x63Â 5 9 10 11
embedded   5   0  Â
BÂ = Â 0x60Â 5 9 10 11
embedded   5   0  Â
CÂ = Â 0x61Â 5 9 10 11
embedded   5   0  Â
DÂ = Â 0x62Â 5 9 10 11
embedded   6   4  Â
AÂ = Â 0x60Â 5 9 10 11
embedded   6   4  Â
BÂ = Â 0x61Â 5 9 10 11
embedded   6   6  Â
AÂ = Â 0x62Â 5 9 10 11
embedded   6   6  Â
BÂ = Â 0x63Â 5 9 10 11
embedded   6   6  Â
C =  0x6a 5 9 10 11
embedded   6   6  Â
DÂ = Â 0x68Â 5 9 10 11
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 6 dev 6 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xccb94000 pa 0x9d000
atpic: Programming IRQ9 as level/low
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 0 func 0
ACPI timer: 1/1 1/1 1/2 1/1 1/1 1/1 1/2 1/1 1/2 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
   0  11 Â
NÂ Â Â Â = 0Â 5 11
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
   0  11 Â
NÂ Â Â Â = 0Â 5 11
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
   0 255  N   Â
0Â= 5 11
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
   0  10 Â
NÂ Â Â Â = 0Â 5 10 11
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
   0  10 Â
NÂ Â Â Â = 0Â 5 10 11
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
   0 255  N   Â
0Â= 5 10 11
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
   0  11 Â
NÂ Â Â Â = 0Â 5 11
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
   0  11 Â
NÂ Â Â Â = 0Â 5 11
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
   0 255  N   Â
0Â= 5 11
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
   0  11 Â
NÂ Â Â Â = 0Â 5 10 11
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
   0  11 Â
NÂ Â Â Â = 0Â 5 10 11
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
   0 255  N   Â
0Â= 5 10 11
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
   0   5 Â
NÂ Â Â Â= 0Â 5 11
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
   0   5 Â
NÂ Â Â Â= 0Â 5 11
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
   0 255  N   Â
0Â= 5 11
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
   0 255  N   Â
0Â= 5 10
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
   0 255  N   Â
0Â= 5 10
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
   0 255  N   Â
0Â= 5 10
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
   0  11 Â
NÂ Â Â Â = 0Â 6
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
   0 255  N   Â
0Â= 6
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
   0 255  N   Â
0Â= 6
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
   0  11 Â
NÂ Â Â Â = 0Â 5 10
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
   0 255  N   Â
0Â= 5 10
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
   0 255  N   Â
0Â= 5 10
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x1010
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.1.INTA at func 0: 11
ACPI: Found matching pin for 0.28.INTA at func 0: 10
ACPI: Found matching pin for 0.28.INTB at func 1: 11
ACPI: Found matching pin for 0.29.INTA at func 0: 11
pci_link7: BIOS IRQ 11 for 0.29.INTA is invalid
ACPI: Found matching pin for 0.29.INTB at func 1: 11
ACPI: Found matching pin for 0.29.INTC at func 2: 11
ACPI: Found matching pin for 0.29.INTD at func 3: 11
ACPI: Found matching pin for 0.30.INTA at func 2: 10
ACPI: Found matching pin for 0.30.INTB at func 3: 5
ACPI: Found matching pin for 0.31.INTB at func 2: 255
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x2590, revid=0x03
       bus=0, slot=0, func=0
       class=06-00-00,
hdrtype=0x= 00, mfdev=0
       cmdreg=0x0006,
statreg=0x2= 090, cachelnsz=0 (dwords)
       lattimer=0x00 (0 ns),
mingnt= =0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2591, revid=0x03
       bus=0, slot=1, func=0
       class=06-04-00,
hdrtype=0x= 01, mfdev=0
       cmdreg=0x0007,
statreg=0x0= 010, cachelnsz=4 (dwords)
       lattimer=0x00 (0 ns),
mingnt= =0x0a (2500 ns), maxlat=0x00 (0 ns)
       intpin=a, irq=11
pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.LPCB.LNKA:0)
pcib0: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKA
found-> vendor=0x8086, dev=0x2660, revid=0x04
       bus=0, slot=28,
func=0 Â Â Â Â Â Â Â class=06-04-00,
hdrtype=0x= 01, mfdev=1
       cmdreg=0x0007,
statreg=0x0= 010, cachelnsz=4 (dwords)
       lattimer=0x00 (0 ns),
mingnt= =0x02 (500 ns), maxlat=0x00 (0 ns)
       intpin=a, irq=10
pcib0: matched entry for 0.28.INTA (src \\_SB_.PCI0.LPCB.LNKB:0)
pcib0: slot 28 INTA routed to irq 10 via \\_SB_.PCI0.LPCB.LNKB
found-> vendor=0x8086, dev=0x2662, revid=0x04
       bus=0, slot=28,
func=1 Â Â Â Â Â Â Â class=06-04-00,
hdrtype=0x= 01, mfdev=1
       cmdreg=0x0007,
statreg=0x0= 010, cachelnsz=4 (dwords)
       lattimer=0x00 (0 ns),
mingnt= =0x02 (500 ns), maxlat=0x00 (0 ns)
       intpin=b, irq=11
pcib0: matched entry for 0.28.INTB (src \\_SB_.PCI0.LPCB.LNKA:0)
pcib0: slot 28 INTB routed to irq 11 via \\_SB_.PCI0.LPCB.LNKA
found-> vendor=0x8086, dev=0x2658, revid=0x04
       bus=0, slot=29,
func=0 Â Â Â Â Â Â Â class=0c-03-00,
hdrtype=0x= 00, mfdev=1
       cmdreg=0x0005,
statreg=0x0= 280, cachelnsz=0 (dwords)
       lattimer=0x00 (0 ns),
mingnt= =0x00 (0 ns), maxlat=0x00 (0 ns)
       intpin=a, irq=11
       map[20]: type 4, range 32,
bas= e 00001200, size 5, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LPCB.LNKH:0)
pci_link7: Picked IRQ 5 with weight 0
pcib0: slot 29 INTA routed to irq 5 via \\_SB_.PCI0.LPCB.LNKH
found-> vendor=0x8086, dev=0x2659, revid=0x04
       bus=0, slot=29,
func=1 Â Â Â Â Â Â Â class=0c-03-00,
hdrtype=0x= 00, mfdev=0
       cmdreg=0x0005,
statreg=0x0= 280, cachelnsz=0 (dwords)
       lattimer=0x00 (0 ns),
mingnt= =0x00 (0 ns), maxlat=0x00 (0 ns)
       intpin=b, irq=11
       map[20]: type 4, range 32,
bas= e 00001220, size 5, enabled
pcib0: matched entry for 0.29.INTB (src \\_SB_.PCI0.LPCB.LNKD:0)
pcib0: slot 29 INTB routed to irq 11 via \\_SB_.PCI0.LPCB.LNKD
found-> vendor=0x8086, dev=0x265a, revid=0x04
       bus=0, slot=29,
func=2 Â Â Â Â Â Â Â class=0c-03-00,
hdrtype=0x= 00, mfdev=0
       cmdreg=0x0005,
statreg=0x0= 280, cachelnsz=0 (dwords)
       lattimer=0x00 (0 ns),
mingnt= =0x00 (0 ns), maxlat=0x00 (0 ns)
       intpin=c, irq=11
       map[20]: type 4, range 32,
bas= e 00001240, size 5, enabled
pcib0: matched entry for 0.29.INTC (src \\_SB_.PCI0.LPCB.LNKC:0)
pcib0: slot 29 INTC routed to irq 11 via \\_SB_.PCI0.LPCB.LNKC
found-> vendor=0x8086, dev=0x265b, revid=0x04
       bus=0, slot=29,
func=3 Â Â Â Â Â Â Â class=0c-03-00,
hdrtype=0x= 00, mfdev=0
       cmdreg=0x0005,
statreg=0x0= 280, cachelnsz=0 (dwords)
       lattimer=0x00 (0 ns),
mingnt= =0x00 (0 ns), maxlat=0x00 (0 ns)
       intpin=d, irq=11
       map[20]: type 4, range 32,
bas= e 00001260, size 5, enabled
pcib0: matched entry for 0.29.INTD (src \\_SB_.PCI0.LPCB.LNKA:0)
pcib0: slot 29 INTD routed to irq 11 via \\_SB_.PCI0.LPCB.LNKA
found-> vendor=0x8086, dev=0x265c, revid=0x04
       bus=0, slot=29,
func=7 Â Â Â Â Â Â Â class=0c-03-20,
hdrtype=0x= 00, mfdev=0
       cmdreg=0x0000,
statreg=0x0= 290, cachelnsz=0 (dwords)
       lattimer=0x00 (0 ns),
mingnt= =0x00 (0 ns), maxlat=0x00 (0 ns)
       intpin=a, irq=11
       powerspec 2 supports
D0 = D3Â current D0
       map[10]: type 1, range 32,
bas= e f4000000, size 10, memory disabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LPCB.LNKH:0)
pcib0: slot 29 INTA routed to irq 5 via \\_SB_.PCI0.LPCB.LNKH
found-> vendor=0x8086, dev=0x2448, revid=0xd4
       bus=0, slot=30,
func=0 Â Â Â Â Â Â Â class=06-04-01,
hdrtype=0x= 01, mfdev=1
       cmdreg=0x0007,
statreg=0x0= 010, cachelnsz=0 (dwords)
       lattimer=0x00 (0 ns),
mingnt= =0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x266e, revid=0x04
       bus=0, slot=30,
func=2 Â Â Â Â Â Â Â class=04-01-00,
hdrtype=0x= 00, mfdev=0
       cmdreg=0x0007,
statreg=0x0= 290, cachelnsz=0 (dwords)
       lattimer=0x00 (0 ns),
mingnt= =0x00 (0 ns), maxlat=0x00 (0 ns)
       intpin=a, irq=10
       powerspec 2 supports
D0 = D3Â current D0
       map[10]: type 4, range 32,
bas= e 0000e000, size 8, enabled
       map[14]: type 4, range 32,
bas= e 0000e100, size 6, enabled
       map[18]: type 1, range 32,
bas= e d0000000, size 9, enabled
       map[1c]: type 1, range 32,
bas= e d0000200, size 8, enabled
pcib0: matched entry for 0.30.INTA (src \\_SB_.PCI0.LPCB.LNKB:0)
pcib0: slot 30 INTA routed to irq 10 via \\_SB_.PCI0.LPCB.LNKB
found-> vendor=0x8086, dev=0x266d, revid=0x04
       bus=0, slot=30,
func=3 Â Â Â Â Â Â Â class=07-03-00,
hdrtype=0x= 00, mfdev=0
       cmdreg=0x0005,
statreg=0x0= 290, cachelnsz=0 (dwords)
       lattimer=0x00 (0 ns),
mingnt= =0x00 (0 ns), maxlat=0x00 (0 ns)
       intpin=b, irq=5
       powerspec 2 supports
D0 = D3Â current D0
       map[10]: type 4, range 32,
bas= e 0000e200, size 8, enabled
       map[14]: type 4, range 32,
bas= e 0000e300, size 7, enabled
pcib0: matched entry for 0.30.INTB (src \\_SB_.PCI0.LPCB.LNKE:0)
pcib0: slot 30 INTB routed to irq 5 via \\_SB_.PCI0.LPCB.LNKE
found-> vendor=0x8086, dev=0x2641, revid=0x04
       bus=0, slot=31,
func=0 Â Â Â Â Â Â Â class=06-01-00,
hdrtype=0x= 00, mfdev=1
       cmdreg=0x0007,
statreg=0x0= 200, cachelnsz=0 (dwords)
       lattimer=0x00 (0 ns),
mingnt= =0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2653, revid=0x04
       bus=0, slot=31,
func=2 Â Â Â Â Â Â Â class=01-01-80,
hdrtype=0x= 00, mfdev=0
       cmdreg=0x0005,
statreg=0x0= 2b0, cachelnsz=0 (dwords)
       lattimer=0x00 (0 ns),
mingnt= =0x00 (0 ns), maxlat=0x00 (0 ns)
       intpin=b, irq=255
       powerspec 2 supports
D0 = D3Â current D0
       map[20]: type 4, range 32,
bas= e 00001100, size 4, enabled
pcib1: <ACPI PCI-PCI bridge> irq 11 at device 1.0 on pci0
pcib1:  secondary bus    1
pcib1:  subordinate bus  1
pcib1:Â Â I/O
decode       0= xc000-0xdfff
pcib1:  memory decode   Â
0xc0000000-0xcff= fffff
pcib1:Â Â prefetched decode 0x90000000-0x9fffffff
ACPI: Found matching pin for 1.0.INTA at func 0: 11
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1002, dev=0x5460, revid=0x00
       bus=1, slot=0, func=0
       class=03-00-00,
hdrtype=0x= 00, mfdev=0
       cmdreg=0x0007,
statreg=0x0= 010, cachelnsz=4 (dwords)
       lattimer=0x00 (0 ns),
mingnt= =0x00 (0 ns), maxlat=0x00 (0 ns)
       intpin=a, irq=11
       powerspec 2 supports
D0 = D1 D2 D3Â current D0
       MSI supports 1 message, 64
bit        map[10]: type 3, range 32,
bas= e 90000000, size 27, enabled
pcib1: (null) requested memory range 0x90000000-0x97ffffff: good
       map[14]: type 4, range 32,
bas= e 0000c000, size 8, enabled
pcib1: (null) requested I/O range 0xc000-0xc0ff: in range
       map[18]: type 1, range 32,
bas= e c0000000, size 16, enabled
pcib1: (null) requested memory range 0xc0000000-0xc000ffff: good
pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.LPCB.LNKA:0)
pcib1: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKA
vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem
0x90000000-0x97ffffff,0xc0000000-0xc000ffff irq 11 at device 0.0 on
pci1
pcib2: <ACPI PCI-PCI bridge> irq 10 at device 28.0 on pci0
pcib2:  secondary bus    2
pcib2:  subordinate bus  2
pcib2:Â Â I/O
decode       0= xa000-0xbfff
pcib2:  memory decode   Â
0xbc000000-0xbff= fffff
pcib2:Â Â prefetched decode 0x8c000000-0x8fffffff
ACPI: Found matching pin for 2.0.INTA at func 0: 11
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x11ab, dev=0x4362, revid=0x15
       bus=2, slot=0, func=0
       class=02-00-00,
hdrtype=0x= 00, mfdev=0
       cmdreg=0x0007,
statreg=0x0= 010, cachelnsz=4 (dwords)
       lattimer=0x00 (0 ns),
mingnt= =0x00 (0 ns), maxlat=0x00 (0 ns)
       intpin=a, irq=11
       powerspec 2 supports
D0 = D1 D2 D3Â current D0
       MSI supports 2 messages, 64
bi= t
       map[10]: type 1, range 64,
bas= e bc000000, size 14, enabled
pcib2: (null) requested memory range 0xbc000000-0xbc003fff: good
       map[18]: type 4, range 32,
bas= e 0000a000, size 8, enabled
pcib2: (null) requested I/O range 0xa000-0xa0ff: in range
pcib2: matched entry for 2.0.INTA (src \\_SB_.PCI0.LPCB.LNKA:0)
pcib2: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKA
pci2: <network, ethernet> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 11 at device 28.1 on pci0
pcib3:  secondary bus    3
pcib3:  subordinate bus  3
pcib3:Â Â I/O
decode       0= x8000-0x9fff
pcib3:  memory decode   Â
0xb8000000-0xbbf= fffff
pcib3:Â Â prefetched decode 0x88000000-0x8bffffff
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port
0x1200-0x121f irq 5 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1200
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port
0x1220-0x123f irq 11 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1220
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port
0x1240-0x125f irq 11 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1240
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port
0x1260-0x127f irq 11 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1260
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem
0xf4000000-0xf40003ff irq 5 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf4000000
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib4:  secondary bus    6
pcib4:  subordinate bus  6
pcib4:Â Â I/O
decode       0= x6000-0x7fff
pcib4:  memory decode   Â
0xb0000000-0xb7f= fffff
pcib4:Â Â prefetched decode 0x80000000-0x87ffffff
pcib4:Â Â Subtractively decoded bridge.
ACPI: Found matching pin for 6.4.INTA at func 0: 11
ACPI: Found matching pin for 6.6.INTA at func 0: 255
ACPI: Found matching pin for 6.6.INTA at func 4: 11
ACPI: Found matching pin for 6.6.INTC at func 2: 11
pci_link6: BIOS IRQ 11 for 6.6.INTC is invalid
ACPI: Found matching pin for 6.6.INTD at func 3: 5
pci6: <ACPI PCI bus> on pcib4
pci6: physical bus=6
found-> vendor=0x8086, dev=0x4220, revid=0x05
       bus=6, slot=4, func=0
       class=02-80-00,
hdrtype=0x= 00, mfdev=0
       cmdreg=0x0006,
statreg=0x0= 290, cachelnsz=0 (dwords)
       lattimer=0x80 (3840 ns),
min= gnt=0x03 (750 ns), maxlat=0x18 (6000 ns)
       intpin=a, irq=11
       powerspec 2 supports
D0 = D3Â current D0
       map[10]: type 1, range 32,
bas= e b000b000, size 12, enabled
pcib4: (null) requested memory range 0xb000b000-0xb000bfff: good
pcib4: matched entry for 6.4.INTA (src \\_SB_.PCI0.LPCB.LNKA:0)
pcib4: slot 4 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKA
found-> vendor=0x104c, dev=0x8031, revid=0x00
       bus=6, slot=6, func=0
       class=06-07-00,
hdrtype=0x= 02, mfdev=1
       cmdreg=0x0007,
statreg=0x0= 210, cachelnsz=0 (dwords)
       lattimer=0x40 (1920 ns),
min= gnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
       intpin=a, irq=255
       powerspec 2 supports
D0 = D1 D2 D3Â current D0
       map[10]: type 1, range 32,
bas= e 13000000, size 12, enabled
pcib4: (null) requested memory range 0x13000000-0x13000fff: good
found-> vendor=0x104c, dev=0x8032, revid=0x00
       bus=6, slot=6, func=2
       class=0c-00-10,
hdrtype=0x= 00, mfdev=1
       cmdreg=0x0006,
statreg=0x0= 210, cachelnsz=4 (dwords)
       lattimer=0x80 (3840 ns),
min= gnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
       intpin=c, irq=11
       powerspec 2 supports
D0 = D1 D2 D3Â current D0
       map[10]: type 1, range 32,
bas= e b0000000, size 11, enabled
pcib4: (null) requested memory range 0xb0000000-0xb00007ff: good
       map[14]: type 1, range 32,
bas= e b0004000, size 14, enabled
pcib4: (null) requested memory range 0xb0004000-0xb0007fff: good
pcib4: matched entry for 6.6.INTC (src \\_SB_.PCI0.LPCB.LNKG:0)
pci_link6: Picked IRQ 9 with weight 0
pcib4: slot 6 INTC routed to irq 9 via \\_SB_.PCI0.LPCB.LNKG
found-> vendor=0x104c, dev=0x8033, revid=0x00
       bus=6, slot=6, func=3
       class=01-80-00,
hdrtype=0x= 00, mfdev=1
       cmdreg=0x0006,
statreg=0x0= 210, cachelnsz=4 (dwords)
       lattimer=0x80 (3840 ns),
min= gnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
       intpin=d, irq=5
       powerspec 2 supports
D0 = D1 D2 D3Â current D0
       map[10]: type 1, range 32,
bas= e b0008000, size 13, enabled
pcib4: (null) requested memory range 0xb0008000-0xb0009fff: good
pcib4: matched entry for 6.6.INTD (src \\_SB_.PCI0.LPCB.LNKE:0)
pcib4: slot 6 INTD routed to irq 5 via \\_SB_.PCI0.LPCB.LNKE
found-> vendor=0x104c, dev=0x8034, revid=0x00
       bus=6, slot=6, func=4
       class=08-05-00,
hdrtype=0x= 00, mfdev=1
       cmdreg=0x0006,
statreg=0x0= 210, cachelnsz=4 (dwords)
       lattimer=0x80 (3840 ns),
min= gnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
       intpin=a, irq=11
       powerspec 2 supports
D0 = D1 D2 D3Â current D0
       map[10]: type 1, range 32,
bas= e b000a000, size 8, enabled
pcib4: (null) requested memory range 0xb000a000-0xb000a0ff: good
       map[14]: type 1, range 32,
bas= e b000a100, size 8, enabled
pcib4: (null) requested memory range 0xb000a100-0xb000a1ff: good
       map[18]: type 1, range 32,
bas= e b000a200, size 8, enabled
pcib4: (null) requested memory range 0xb000a200-0xb000a2ff: good
pcib4: matched entry for 6.6.INTA (src \\_SB_.PCI0.LPCB.LNKC:0)
pcib4: slot 6 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKC
iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xb000b000-0xb000bfff irq 11
at device 4.0 on pci6
iwi0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb000b000
iwi0: bpf attached
iwi0: Ethernet address: 00:12:f0:63:ae:ca
iwi0: bpf attached
iwi0: bpf attached
iwi0: [MPSAFE]
iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
cbb0: <TI6411 PCI-CardBus Bridge> mem 0x13000000-0x13000fff at device
6.0 on pci6
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x13000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib4: matched entry for 6.6.INTA (src \\_SB_.PCI0.LPCB.LNKC:0)
pcib4: slot 6 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKC
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
 0x00: 0x8031104c 0x02100007 0x06070000 0x00824000
 0x10: 0x13000000 0x020000a0 0x40080706 0xfffff000
 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b
 0x40: 0xff101179 0x00000001 0x00000000 0x00000000
 0x50: 0x00000000 0x00000000 0x00000000 0x00000000
 0x60: 0x00000000 0x00000000 0x00000000 0x00000000
 0x70: 0x00000000 0x00000000 0x00000000 0x00000000
 0x80: 0x08409060 0x00000000 0x000f0002 0x01aa1b22
 0x90: 0x606600c0 0x00000000 0x00000000 0x00000000
 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000
 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
fwohci0: vendor=104c, dev=8032
fwohci0: vendor=104c, dev=8032
fwohci0: <1394 Open Host Controller Interface> mem
0xb0000000-0xb00007ff,0xb0004000-0xb0007fff irq 9 at device 6.2 on
pci6 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xb0000000
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:08:0d:a0:d1:bf:aa:e1
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:08:0d:bf:aa:e1
fwe0: bpf attached
fwe0: Ethernet address: 02:08:0d:bf:aa:e1
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=2, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
fwohci0: phy int
pci6: <mass storage> at device 6.3 (no driver attached)
pci6: <base peripheral> at device 6.4 (no driver attached)
pcm0: <Intel ICH6 (82801FB)> port 0xe000-0xe0ff,0xe100-0xe13f mem
0xd0000000-0xd00001ff,0xd0000200-0xd00002ff irq 10 at devic
e 30.2 on pci0
pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xd0000000
pcm0: Reserved 0x100 bytes for rid 0x1c type 3 at 0xd0000200
pcm0: [MPSAFE]
pcm0: <Analog Devices AD1981B AC97 Codec (id = 0x41445374)>
pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D
Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, AMAP,
reserved 4
pcm0: ac97 codec dac ready count: 0
pcm0: sndbuf_setmap 1f3cb000, 4000; 0xd4c8c000 -> 1f3cb000
pcm0: sndbuf_setmap 1f3c7000, 4000; 0xd4c90000 -> 1f3c7000
pci0: <simple comms, generic modem> at device 30.3 (no driver
attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 SATA150 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1100-0x110f at device 31.2 on
pci0<= br> atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1100
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
= ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz3: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0067
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0xa21 0xa31 0xa20 0xa21
sio0: irq maps: 0xa21 0xa31 0xa21 0xa21
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10
on acpi0
sio0: type 16550A
sio0: [FAST]
sio1: irq maps: 0xa21 0xa29 0xa21 0xa21
sio1: irq maps: 0xa21 0xa29 0xa21 0xa21
sio1 port 0x2f8-0x2ff,0x110-0x117 irq 3 drq 1 on acpi0
sio1: type 16550A
sio1: [FAST]
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xcffff,0xe0000-0xe1fff,0xe5000-0xe5fff,0xeb000-0xeffff pnpid
ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
ums0: <Mitsumi Electric Apple Optical USB Mouse, class 0/0, rev
1.10/1.08, addr 2> on uhub0
ums0: 4 buttons and Z dir.
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1988609348 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
rr232x: no controller detected.
Interrupt storm detected on "irq11:"; throttling interrupt source
acpi_acad0: acline initialization start
battery0: battery initialization start
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: 76319MB <FUJITSU MHT2080AT 0022> at ata0-master UDMA100
ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth
queue
GEOM: new disk ad0
acpi_tz0: _AC1: temperature 59.0 >= setpoint 44.8
acpi_tz0: switched from NONE to _AC1: 59.0C
system power profile changed to 'economy'
acpi_acad0: Off Line
acpi_acad0: acline initialization done, tried 1 times
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: <MATSHITADVD-RAM UJ-831S/1.40> DVDR drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB
buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-R 120mm data disc
pcm0: measured ac97 link rate at 47994 Hz, will use 48000 Hz
(probe7:ata1:0:0:0): error 22
(probe7:ata1:0:0:0): Unretryable Error
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <MATSHITA DVD-RAM UJ-831S 1.40> Removable CD-ROM SCSI-0 device
pass0: 33.000MB/s transfers
GEOM: new disk cd0
ATA PseudoRAID loaded
cd0 at ata1 bus 0 target 0 lun 0
cd0: <MATSHITA DVD-RAM UJ-831S 1.40> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: cd present [1 x 2048 byte records]
(cd0:ata1:0:0:0): error 22
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 22
(cd0:ata1:0:0:0): Unretryable Error
Trying to mount root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
Linux ELF exec handler installed
linprocfs registered
battery0: battery initialization done, tried 2 times
iwi0: link state changed to UP
WARNING: attempt to net_add_domain(bluetooth) after domainfinalize()
stray irq7
iwi0: link state changed to DOWN
iwi0: link state changed to UP
--
Sincerely,
Yousef Adnan Raffah
The Savola Group
-------------------
Aren't you using Firefox? Get it at [1]http://www.getfirefox.com
References
1. 3D"http://www.getfirefox.com"/
verbose_dmesg.txt
(text/plain, 28.8 KB)
embedded 1 0 B 0x61 5 9 10 11
embedded 1 0 C 0x62 5 9 10 11
embedded 1 0 D 0x63 5 9 10 11
embedded 2 0 A 0x60 5 9 10 11
embedded 2 0 B 0x61 5 9 10 11
embedded 2 0 C 0x62 5 9 10 11
embedded 2 0 D 0x63 5 9 10 11
embedded 3 0 A 0x61 5 9 10 11
embedded 3 0 B 0x62 5 9 10 11
embedded 3 0 C 0x63 5 9 10 11
embedded 3 0 D 0x60 5 9 10 11
embedded 4 0 A 0x62 5 9 10 11
embedded 4 0 B 0x63 5 9 10 11
embedded 4 0 C 0x60 5 9 10 11
embedded 4 0 D 0x61 5 9 10 11
embedded 5 0 A 0x63 5 9 10 11
embedded 5 0 B 0x60 5 9 10 11
embedded 5 0 C 0x61 5 9 10 11
embedded 5 0 D 0x62 5 9 10 11
embedded 6 4 A 0x60 5 9 10 11
embedded 6 4 B 0x61 5 9 10 11
embedded 6 6 A 0x62 5 9 10 11
embedded 6 6 B 0x63 5 9 10 11
embedded 6 6 C 0x6a 5 9 10 11
embedded 6 6 D 0x68 5 9 10 11
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 6 dev 6 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xccb94000 pa 0x9d000
atpic: Programming IRQ9 as level/low
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 0 func 0
ACPI timer: 1/1 1/1 1/2 1/1 1/1 1/1 1/2 1/1 1/2 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 5 11
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 5 11
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 11
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 5 10 11
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 5 10 11
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 5 11
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 5 11
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 11
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 5 10 11
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 5 10 11
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 5 11
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 5 11
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 11
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 6
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 6
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 6
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 5 10
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10
cpu0: <ACPI CPU> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x1010
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.1.INTA at func 0: 11
ACPI: Found matching pin for 0.28.INTA at func 0: 10
ACPI: Found matching pin for 0.28.INTB at func 1: 11
ACPI: Found matching pin for 0.29.INTA at func 0: 11
pci_link7: BIOS IRQ 11 for 0.29.INTA is invalid
ACPI: Found matching pin for 0.29.INTB at func 1: 11
ACPI: Found matching pin for 0.29.INTC at func 2: 11
ACPI: Found matching pin for 0.29.INTD at func 3: 11
ACPI: Found matching pin for 0.30.INTA at func 2: 10
ACPI: Found matching pin for 0.30.INTB at func 3: 5
ACPI: Found matching pin for 0.31.INTB at func 2: 255
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x2590, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2591, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=4 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.LPCB.LNKA:0)
pcib0: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKA
found-> vendor=0x8086, dev=0x2660, revid=0x04
bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=4 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
pcib0: matched entry for 0.28.INTA (src \\_SB_.PCI0.LPCB.LNKB:0)
pcib0: slot 28 INTA routed to irq 10 via \\_SB_.PCI0.LPCB.LNKB
found-> vendor=0x8086, dev=0x2662, revid=0x04
bus=0, slot=28, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=4 (dwords)
lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
pcib0: matched entry for 0.28.INTB (src \\_SB_.PCI0.LPCB.LNKA:0)
pcib0: slot 28 INTB routed to irq 11 via \\_SB_.PCI0.LPCB.LNKA
found-> vendor=0x8086, dev=0x2658, revid=0x04
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type 4, range 32, base 00001200, size 5, enabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LPCB.LNKH:0)
pci_link7: Picked IRQ 5 with weight 0
pcib0: slot 29 INTA routed to irq 5 via \\_SB_.PCI0.LPCB.LNKH
found-> vendor=0x8086, dev=0x2659, revid=0x04
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type 4, range 32, base 00001220, size 5, enabled
pcib0: matched entry for 0.29.INTB (src \\_SB_.PCI0.LPCB.LNKD:0)
pcib0: slot 29 INTB routed to irq 11 via \\_SB_.PCI0.LPCB.LNKD
found-> vendor=0x8086, dev=0x265a, revid=0x04
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=11
map[20]: type 4, range 32, base 00001240, size 5, enabled
pcib0: matched entry for 0.29.INTC (src \\_SB_.PCI0.LPCB.LNKC:0)
pcib0: slot 29 INTC routed to irq 11 via \\_SB_.PCI0.LPCB.LNKC
found-> vendor=0x8086, dev=0x265b, revid=0x04
bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[20]: type 4, range 32, base 00001260, size 5, enabled
pcib0: matched entry for 0.29.INTD (src \\_SB_.PCI0.LPCB.LNKA:0)
pcib0: slot 29 INTD routed to irq 11 via \\_SB_.PCI0.LPCB.LNKA
found-> vendor=0x8086, dev=0x265c, revid=0x04
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base f4000000, size 10, memory disabled
pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LPCB.LNKH:0)
pcib0: slot 29 INTA routed to irq 5 via \\_SB_.PCI0.LPCB.LNKH
found-> vendor=0x8086, dev=0x2448, revid=0xd4
bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x266e, revid=0x04
bus=0, slot=30, func=2
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000e000, size 8, enabled
map[14]: type 4, range 32, base 0000e100, size 6, enabled
map[18]: type 1, range 32, base d0000000, size 9, enabled
map[1c]: type 1, range 32, base d0000200, size 8, enabled
pcib0: matched entry for 0.30.INTA (src \\_SB_.PCI0.LPCB.LNKB:0)
pcib0: slot 30 INTA routed to irq 10 via \\_SB_.PCI0.LPCB.LNKB
found-> vendor=0x8086, dev=0x266d, revid=0x04
bus=0, slot=30, func=3
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000e200, size 8, enabled
map[14]: type 4, range 32, base 0000e300, size 7, enabled
pcib0: matched entry for 0.30.INTB (src \\_SB_.PCI0.LPCB.LNKE:0)
pcib0: slot 30 INTB routed to irq 5 via \\_SB_.PCI0.LPCB.LNKE
found-> vendor=0x8086, dev=0x2641, revid=0x04
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2653, revid=0x04
bus=0, slot=31, func=2
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00001100, size 4, enabled
pcib1: <ACPI PCI-PCI bridge> irq 11 at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xc000-0xdfff
pcib1: memory decode 0xc0000000-0xcfffffff
pcib1: prefetched decode 0x90000000-0x9fffffff
ACPI: Found matching pin for 1.0.INTA at func 0: 11
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1002, dev=0x5460, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=4 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 3, range 32, base 90000000, size 27, enabled
pcib1: (null) requested memory range 0x90000000-0x97ffffff: good
map[14]: type 4, range 32, base 0000c000, size 8, enabled
pcib1: (null) requested I/O range 0xc000-0xc0ff: in range
map[18]: type 1, range 32, base c0000000, size 16, enabled
pcib1: (null) requested memory range 0xc0000000-0xc000ffff: good
pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.LPCB.LNKA:0)
pcib1: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKA
vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0x90000000-0x97ffffff,0xc0000000-0xc000ffff irq 11 at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> irq 10 at device 28.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xa000-0xbfff
pcib2: memory decode 0xbc000000-0xbfffffff
pcib2: prefetched decode 0x8c000000-0x8fffffff
ACPI: Found matching pin for 2.0.INTA at func 0: 11
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x11ab, dev=0x4362, revid=0x15
bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=4 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 2 messages, 64 bit
map[10]: type 1, range 64, base bc000000, size 14, enabled
pcib2: (null) requested memory range 0xbc000000-0xbc003fff: good
map[18]: type 4, range 32, base 0000a000, size 8, enabled
pcib2: (null) requested I/O range 0xa000-0xa0ff: in range
pcib2: matched entry for 2.0.INTA (src \\_SB_.PCI0.LPCB.LNKA:0)
pcib2: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKA
pci2: <network, ethernet> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 11 at device 28.1 on pci0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0x8000-0x9fff
pcib3: memory decode 0xb8000000-0xbbffffff
pcib3: prefetched decode 0x88000000-0x8bffffff
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1200-0x121f irq 5 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1200
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1220-0x123f irq 11 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1220
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1240-0x125f irq 11 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1240
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1260-0x127f irq 11 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1260
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xf4000000-0xf40003ff irq 5 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf4000000
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib4: secondary bus 6
pcib4: subordinate bus 6
pcib4: I/O decode 0x6000-0x7fff
pcib4: memory decode 0xb0000000-0xb7ffffff
pcib4: prefetched decode 0x80000000-0x87ffffff
pcib4: Subtractively decoded bridge.
ACPI: Found matching pin for 6.4.INTA at func 0: 11
ACPI: Found matching pin for 6.6.INTA at func 0: 255
ACPI: Found matching pin for 6.6.INTA at func 4: 11
ACPI: Found matching pin for 6.6.INTC at func 2: 11
pci_link6: BIOS IRQ 11 for 6.6.INTC is invalid
ACPI: Found matching pin for 6.6.INTD at func 3: 5
pci6: <ACPI PCI bus> on pcib4
pci6: physical bus=6
found-> vendor=0x8086, dev=0x4220, revid=0x05
bus=6, slot=4, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x03 (750 ns), maxlat=0x18 (6000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base b000b000, size 12, enabled
pcib4: (null) requested memory range 0xb000b000-0xb000bfff: good
pcib4: matched entry for 6.4.INTA (src \\_SB_.PCI0.LPCB.LNKA:0)
pcib4: slot 4 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKA
found-> vendor=0x104c, dev=0x8031, revid=0x00
bus=6, slot=6, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 13000000, size 12, enabled
pcib4: (null) requested memory range 0x13000000-0x13000fff: good
found-> vendor=0x104c, dev=0x8032, revid=0x00
bus=6, slot=6, func=2
class=0c-00-10, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=4 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=c, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base b0000000, size 11, enabled
pcib4: (null) requested memory range 0xb0000000-0xb00007ff: good
map[14]: type 1, range 32, base b0004000, size 14, enabled
pcib4: (null) requested memory range 0xb0004000-0xb0007fff: good
pcib4: matched entry for 6.6.INTC (src \\_SB_.PCI0.LPCB.LNKG:0)
pci_link6: Picked IRQ 9 with weight 0
pcib4: slot 6 INTC routed to irq 9 via \\_SB_.PCI0.LPCB.LNKG
found-> vendor=0x104c, dev=0x8033, revid=0x00
bus=6, slot=6, func=3
class=01-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=4 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
intpin=d, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base b0008000, size 13, enabled
pcib4: (null) requested memory range 0xb0008000-0xb0009fff: good
pcib4: matched entry for 6.6.INTD (src \\_SB_.PCI0.LPCB.LNKE:0)
pcib4: slot 6 INTD routed to irq 5 via \\_SB_.PCI0.LPCB.LNKE
found-> vendor=0x104c, dev=0x8034, revid=0x00
bus=6, slot=6, func=4
class=08-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=4 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base b000a000, size 8, enabled
pcib4: (null) requested memory range 0xb000a000-0xb000a0ff: good
map[14]: type 1, range 32, base b000a100, size 8, enabled
pcib4: (null) requested memory range 0xb000a100-0xb000a1ff: good
map[18]: type 1, range 32, base b000a200, size 8, enabled
pcib4: (null) requested memory range 0xb000a200-0xb000a2ff: good
pcib4: matched entry for 6.6.INTA (src \\_SB_.PCI0.LPCB.LNKC:0)
pcib4: slot 6 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKC
iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xb000b000-0xb000bfff irq 11 at device 4.0 on pci6
iwi0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb000b000
iwi0: bpf attached
iwi0: Ethernet address: 00:12:f0:63:ae:ca
iwi0: bpf attached
iwi0: bpf attached
iwi0: [MPSAFE]
iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
cbb0: <TI6411 PCI-CardBus Bridge> mem 0x13000000-0x13000fff at device 6.0 on pci6
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x13000000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib4: matched entry for 6.6.INTA (src \\_SB_.PCI0.LPCB.LNKC:0)
pcib4: slot 6 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKC
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x8031104c 0x02100007 0x06070000 0x00824000
0x10: 0x13000000 0x020000a0 0x40080706 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b
0x40: 0xff101179 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x08409060 0x00000000 0x000f0002 0x01aa1b22
0x90: 0x606600c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
fwohci0: vendor=104c, dev=8032
fwohci0: vendor=104c, dev=8032
fwohci0: <1394 Open Host Controller Interface> mem 0xb0000000-0xb00007ff,0xb0004000-0xb0007fff irq 9 at device 6.2 on pci6
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xb0000000
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:08:0d:a0:d1:bf:aa:e1
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:08:0d:bf:aa:e1
fwe0: bpf attached
fwe0: Ethernet address: 02:08:0d:bf:aa:e1
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=2, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
fwohci0: phy int
pci6: <mass storage> at device 6.3 (no driver attached)
pci6: <base peripheral> at device 6.4 (no driver attached)
pcm0: <Intel ICH6 (82801FB)> port 0xe000-0xe0ff,0xe100-0xe13f mem 0xd0000000-0xd00001ff,0xd0000200-0xd00002ff irq 10 at device 30.2 on pci0
pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xd0000000
pcm0: Reserved 0x100 bytes for rid 0x1c type 3 at 0xd0000200
pcm0: [MPSAFE]
pcm0: <Analog Devices AD1981B AC97 Codec (id = 0x41445374)>
pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, AMAP, reserved 4
pcm0: ac97 codec dac ready count: 0
pcm0: sndbuf_setmap 1f3cb000, 4000; 0xd4c8c000 -> 1f3cb000
pcm0: sndbuf_setmap 1f3c7000, 4000; 0xd4c90000 -> 1f3c7000
pci0: <simple comms, generic modem> at device 30.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1100-0x110f at device 31.2 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1100
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz3: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0067
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0xa21 0xa31 0xa20 0xa21
sio0: irq maps: 0xa21 0xa31 0xa21 0xa21
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FAST]
sio1: irq maps: 0xa21 0xa29 0xa21 0xa21
sio1: irq maps: 0xa21 0xa29 0xa21 0xa21
sio1 port 0x2f8-0x2ff,0x110-0x117 irq 3 drq 1 on acpi0
sio1: type 16550A
sio1: [FAST]
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xe0000-0xe1fff,0xe5000-0xe5fff,0xeb000-0xeffff pnpid ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
ums0: <Mitsumi Electric Apple Optical USB Mouse, class 0/0, rev 1.10/1.08, addr 2> on uhub0
ums0: 4 buttons and Z dir.
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1988609348 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
rr232x: no controller detected.
Interrupt storm detected on "irq11:"; throttling interrupt source
acpi_acad0: acline initialization start
battery0: battery initialization start
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
ad0: 76319MB <FUJITSU MHT2080AT 0022> at ata0-master UDMA100
ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
acpi_tz0: _AC1: temperature 59.0 >= setpoint 44.8
acpi_tz0: switched from NONE to _AC1: 59.0C
system power profile changed to 'economy'
acpi_acad0: Off Line
acpi_acad0: acline initialization done, tried 1 times
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: <MATSHITADVD-RAM UJ-831S/1.40> DVDR drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-R 120mm data disc
pcm0: measured ac97 link rate at 47994 Hz, will use 48000 Hz
(probe7:ata1:0:0:0): error 22
(probe7:ata1:0:0:0): Unretryable Error
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <MATSHITA DVD-RAM UJ-831S 1.40> Removable CD-ROM SCSI-0 device
pass0: 33.000MB/s transfers
GEOM: new disk cd0
ATA PseudoRAID loaded
cd0 at ata1 bus 0 target 0 lun 0
cd0: <MATSHITA DVD-RAM UJ-831S 1.40> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: cd present [1 x 2048 byte records]
(cd0:ata1:0:0:0): error 22
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 22
(cd0:ata1:0:0:0): Unretryable Error
Trying to mount root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
Linux ELF exec handler installed
linprocfs registered
battery0: battery initialization done, tried 2 times
iwi0: link state changed to UP
WARNING: attempt to net_add_domain(bluetooth) after domainfinalize()
stray irq7
iwi0: link state changed to DOWN
iwi0: link state changed to UP
signature.asc
(application/pgp-signature, 187 B)
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.4 (FreeBSD) iD8DBQFE0D6mqG4sHeIU6qURAm34AJ96qOTHYKawEOnYGozZdwgxFD3K2wCfdfPk hSz6L9rt+ft2AnOAkraPdis= =DBKx -----END PGP SIGNATURE-----