Acer Aspire AS5672 laptop and FreeBSD7.0-current (august snapshot)
Torfinn Ingolfsen <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
Specifications from Wikipedia: http://en.wikipedia.org/wiki/Aspire_5000#Aspire_5672_WLMi I'm still working (slowly) with this laptop, in order to see if I can make it work reasonably well with FreeBSD. One part of that is testing with 7.0-current. I just completed an install (upgrade) of the August snapshot. Status is the same as with the July snapshot: - with ACPI enabled, both wired and wireless networking refuse to work (see dmesg output) - with ACPI disabled, the machine hangs / stops before I can login. Attached are dmesg and verbose dmesg output, with ACPI enabled. -- Regards, Torfinn Ingolfsen, Norway _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "[email protected]"
kg-home-dmesg-7.0-current-20060814.txt
(text/plain, 8.7 KB)
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 7.0-CURRENT-200608 #0: Tue Aug 8 09:05:08 UTC 2006
[email protected]:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Genuine Intel(R) CPU T2250 @ 1.73GHz (1733.40-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8
Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xc189<SSE3,MON,EST,TM2,XTPR,<b15>>
AMD Features=0x100000<NX>
Cores per package: 2
real memory = 2145910784 (2046 MB)
avail memory = 2094755840 (1997 MB)
ACPI APIC Table: <INTEL CALISTGA>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <PTLTD RSDT> on motherboard
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497f240 StartNode 0xc497f240 ReturnNode 0
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497cdc0 StartNode 0xc497cdc0 ReturnNode 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
unknown: I/O range not supported
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xd0000000-0xd7ffffff,0xc8100000-0xc810ffff irq 16 at device 0.0 on pci1
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci4: <ACPI PCI bus> on pcib4
bge0: <Broadcom BCM5750 C1, ASIC rev. 0x4201> irq 18 at device 0.0 on pci4
bge0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffff).
bge0: couldn't map memory
device_attach: bge0 attach returned 6
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci5: <ACPI PCI bus> on pcib5
uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1820-0x183f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1860-0x187f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xc8004000-0xc80043ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
ugen0: <OEM Camera, class 255/255, rev 2.00/1.00, addr 2> on uhub4
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci10: <ACPI PCI bus> on pcib6
cbb0: <PCI-CardBus Bridge> mem 0xc8404000-0xc8404fff irq 20 at device 9.0 on pci10
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 0xc8405000-0xc84057ff,0xc8400000-0xc8403fff irq 20 at device 9.1 on pci10
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:c0:9f:00:00:9a:84:d3
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:c0:9f:9a:84:d3
fwe0: Ethernet address: 02:c0:9f:9a:84:d3
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci10: <mass storage> at device 9.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18b0-0x18bf at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sio0 port 0x2f8-0x2ff,0x6f8-0x6ff irq 3 drq 3 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FAST]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xdf800-0xdffff,0xe0000-0xe17ff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ad0: 114473MB <SAMSUNG HM120JI YF100-10> at ata0-master UDMA33
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497f240 StartNode 0xc497f240 ReturnNode 0
ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f140), AE_NOT_FOUND
acd0: DVDR <MATSHITADVD-RAM UJ-845S/D201> at ata1-master UDMA33
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s4a
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497f240 StartNode 0xc497f240 ReturnNode 0
ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f140), AE_NOT_FOUND
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497f240 StartNode 0xc497f240 ReturnNode 0
ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f140), AE_NOT_FOUND
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497f240 StartNode 0xc497f240 ReturnNode 0
ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f140), AE_NOT_FOUND
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497f240 StartNode 0xc497f240 ReturnNode 0
ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f140), AE_NOT_FOUND
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497f240 StartNode 0xc497f240 ReturnNode 0
ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f140), AE_NOT_FOUND
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497f240 StartNode 0xc497f240 ReturnNode 0
ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f140), AE_NOT_FOUND
kg-home-dmesg-7.0-current-20060814-verbose.txt
(text/plain, 29.9 KB)
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Aug 8 2006 09:04:34)
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497f260 StartNode 0xc497f260 ReturnNode 0
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497cde0 StartNode 0xc497cde0 ReturnNode 0
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fa20
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=27a08086)
pcibios: BIOS version 2.10
Found $PIR table, 13 entries at 0xc00fdd60
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 7 A 0x60 6 10 11
embedded 0 1 A 0x60 6 10 11
embedded 1 0 A 0x60 6 10 11
embedded 0 2 A 0x60 6 10 11
embedded 0 27 A 0x6a 6 10 11
embedded 0 28 A 0x61 6 10 11
embedded 0 28 B 0x60 6 10 11
embedded 0 28 C 0x62 6 10 11
embedded 0 28 D 0x63 6 10 11
embedded 5 0 A 0x62 6 10 11
embedded 0 29 A 0x6b 6 10 11
embedded 0 29 B 0x63 6 10 11
embedded 0 29 C 0x62 6 10 11
embedded 0 29 D 0x60 6 10 11
embedded 0 30 A 0x6a 6 10 11
embedded 0 30 B 0x68 6 10 11
embedded 0 31 A 0x62 6 10 11
embedded 0 31 B 0x63 6 10 11
embedded 0 31 D 0x60 6 10 11
embedded 10 0 A 0x61 6 10 11
embedded 10 9 A 0x68 6 10 11
embedded 10 9 B 0x69 6 10 11
embedded 10 9 C 0x6a 6 10 11
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 28 func 3
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
AcpiOsDerivePciId: bus 0 dev 31 func 2
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xd88c3000 pa 0x9d000
unknown: I/O range not supported
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 1 hz: 14318180 opts: leg_route count_size
Timecounter "HPET" frequency 14318180 Hz quality -200
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 1 3 4 5 6 7 10 12 14 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 12 14 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 12 14 15
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 1 3 4 5 6 7 11 12 14 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 1 3 4 5 6 7 11 12 14 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 11 12 14 15
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 1 3 4 5 6 7 10 12 14 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 1 3 4 5 6 7 10 12 14 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 12 14 15
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 1 3 4 5 6 7 11 12 14 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 11 12 14 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 11 12 14 15
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 1 3 4 5 6 7 10 12 14 15
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 1 3 4 5 6 7 10 12 14 15
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 12 14 15
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 11 12 14 15
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 11 12 14 15
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 11 12 14 15
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 1 3 4 5 6 7 10 12 14 15
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 1 3 4 5 6 7 10 12 14 15
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 10 12 14 15
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 1 3 4 5 6 7 11 12 14 15
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 1 3 4 5 6 7 11 12 14 15
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 1 3 4 5 6 7 11 12 14 15
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x1010
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x27a0, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27a1, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x1c (7000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x27d8, revid=0x02
bus=0, slot=27, func=0
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base c8000000, size 14, enabled
pcib0: matched entry for 0.27.INTA
pcib0: slot 27 INTA hardwired to IRQ 22
found-> vendor=0x8086, dev=0x27d0, revid=0x02
bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x27d2, revid=0x02
bus=0, slot=28, func=1
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 16
found-> vendor=0x8086, dev=0x27d4, revid=0x02
bus=0, slot=28, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
pcib0: matched entry for 0.28.INTC
pcib0: slot 28 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x27d6, revid=0x02
bus=0, slot=28, func=3
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
pcib0: matched entry for 0.28.INTD
pcib0: slot 28 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x27c8, revid=0x02
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[20]: type 4, range 32, base 00001800, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x27c9, revid=0x02
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type 4, range 32, base 00001820, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x27ca, revid=0x02
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
map[20]: type 4, range 32, base 00001840, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x27cb, revid=0x02
bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
map[20]: type 4, range 32, base 00001860, size 5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 16
found-> vendor=0x8086, dev=0x27cc, revid=0x02
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base c8004000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 23
found-> vendor=0x8086, dev=0x2448, revid=0xe2
bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27b9, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x27c4, revid=0x02
bus=0, slot=31, func=2
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x02b8, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 000018b0, size 4, enabled
found-> vendor=0x8086, dev=0x27da, revid=0x02
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
map[20]: type 4, range 32, base 000018c0, size 5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 19
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x2000-0x2fff
pcib1: memory decode 0xc8100000-0xc81fffff
pcib1: prefetched decode 0xd0000000-0xd7ffffff
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1002, dev=0x71c5, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 3, range 32, base d0000000, size 27, enabled
pcib1: (null) requested memory range 0xd0000000-0xd7ffffff: good
map[14]: type 4, range 32, base 00002000, size 8, enabled
pcib1: (null) requested I/O range 0x2000-0x20ff: in range
map[18]: type 1, range 32, base c8100000, size 16, enabled
pcib1: (null) requested memory range 0xc8100000-0xc810ffff: good
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 16
vgapci0: <VGA-compatible display> port 0x2000-0x20ff mem 0xd0000000-0xd7ffffff,0xc8100000-0xc810ffff irq 16 at device 0.0 on pci1
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x0-0x0
pcib2: memory decode 0x0-0x0
pcib2: prefetched decode 0x0-0x0
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0x0-0x0
pcib3: memory decode 0x0-0x0
pcib3: prefetched decode 0x0-0x0
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
found-> vendor=0x8086, dev=0x4222, revid=0x02
bus=3, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 32, base 00000000, size 12, memory disabled
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 17
pci3: <network> at device 0.0 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0x0-0x0
pcib4: memory decode 0x0-0x0
pcib4: prefetched decode 0x0-0x0
pci4: <ACPI PCI bus> on pcib4
pci4: physical bus=4
found-> vendor=0x14e4, dev=0x169d, revid=0x21
bus=4, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type 1, range 64, base 00000000, size 16, memory disabled
pcib4: matched entry for 4.0.INTA
pcib4: slot 0 INTA hardwired to IRQ 18
bge0: <Broadcom BCM5750 C1, ASIC rev. 0x4201> irq 18 at device 0.0 on pci4
pcib4: bge0 requested unsupported memory range 0x0-0xffffffff (decoding 0x0-0x0, 0x0-0x0)
bge0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffff).
bge0: couldn't map memory
device_attach: bge0 attach returned 6
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pcib5: secondary bus 5
pcib5: subordinate bus 7
pcib5: I/O decode 0x0-0x0
pcib5: memory decode 0x0-0x0
pcib5: prefetched decode 0x0-0x0
pcib5: could not get PCI interrupt routing table for \\_SB_.PCI0.RP04 - AE_NOT_FOUND
pci5: <ACPI PCI bus> on pcib5
pci5: physical bus=5
uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 23 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 49
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x1820-0x183f irq 19 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 50
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 18 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x1860-0x187f irq 16 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 52
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xc8004000-0xc80043ff irq 23 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xc8004000
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
ugen0: <OEM Camera, class 255/255, rev 2.00/1.00, addr 2> on uhub4
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib6: secondary bus 10
pcib6: subordinate bus 11
pcib6: I/O decode 0xf000-0xfff
pcib6: memory decode 0xc8400000-0xc84fffff
pcib6: prefetched decode 0xfff00000-0xfffff
pcib6: Subtractively decoded bridge.
pci10: <ACPI PCI bus> on pcib6
pci10: physical bus=10
found-> vendor=0x104c, dev=0x8039, revid=0x00
bus=10, slot=9, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x30 (1440 ns), mingnt=0xc4 (49000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base c8404000, size 12, enabled
pcib6: (null) requested memory range 0xc8404000-0xc8404fff: good
pcib6: matched entry for 10.9.INTA
pcib6: slot 9 INTA hardwired to IRQ 20
found-> vendor=0x104c, dev=0x803a, revid=0x00
bus=10, slot=9, func=1
class=0c-00-10, hdrtype=0x00, mfdev=1
cmdreg=0x0016, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base c8405000, size 11, enabled
pcib6: (null) requested memory range 0xc8405000-0xc84057ff: good
map[14]: type 1, range 32, base c8400000, size 14, enabled
pcib6: (null) requested memory range 0xc8400000-0xc8403fff: good
pcib6: matched entry for 10.9.INTA
pcib6: slot 9 INTA hardwired to IRQ 20
found-> vendor=0x104c, dev=0x803b, revid=0x00
bus=10, slot=9, func=2
class=01-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x39 (1710 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base c8406000, size 12, enabled
pcib6: (null) requested memory range 0xc8406000-0xc8406fff: good
pcib6: matched entry for 10.9.INTA
pcib6: slot 9 INTA hardwired to IRQ 20
cbb0: <PCI-CardBus Bridge> mem 0xc8404000-0xc8404fff irq 20 at device 9.0 on pci10
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc8404000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 53
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x8039104c 0x02100007 0x06070000 0x00823010
0x10: 0xc8404000 0x020000a0 0x200b0b0a 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x04440114
0x40: 0x00941025 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x3844d060 0x02d40019 0x001f0000 0x01321b22
0x90: 0x606602c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000
0xb0: 0x08000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x438e450d 0x97019449 0x00000000 0x00000000
fwohci0: vendor=104c, dev=803a
fwohci0: vendor=104c, dev=803a
fwohci0: <1394 Open Host Controller Interface> mem 0xc8405000-0xc84057ff,0xc8400000-0xc8403fff irq 20 at device 9.1 on pci10
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xc8405000
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:c0:9f:00:00:9a:84:d3
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:c0:9f:9a:84:d3
fwe0: bpf attached
fwe0: Ethernet address: 02:c0:9f:9a:84:d3
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci10: <mass storage> at device 9.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18b0-0x18bf at device 31.2 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x18b0
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 55
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 57
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0x8e01 0x8e09 0x8e01 0x8e01
sio0: irq maps: 0x8e01 0x8e09 0x8e01 0x8e01
sio0 port 0x2f8-0x2ff,0x6f8-0x6ff irq 3 drq 3 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 3 (ISA IRQ 3) to vector 58
sio0: [FAST]
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xdf800-0xdffff,0xe0000-0xe17ff pnpid ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 134273 -> 100000
procfs registered
lapic: Divisor 2, Frequency 66669717 hz
Timecounter "TSC" frequency 1733412213 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
rr232x: no controller detected.
acpi_acad0: acline initialization start
battery0: battery initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497f260 StartNode 0xc497f260 ReturnNode 0
ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f160), AE_NOT_FOUND
battery0: error fetching current battery status -- AE_NOT_FOUND
battery0: battery initialization done, tried 1 times
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad0: 114473MB <SAMSUNG HM120JI YF100-10> at ata0-master UDMA33
ad0: 234441648 sectors [232581C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: <MATSHITADVD-RAM UJ-845S/D201> DVDR drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable caddy, unlocked
acd0: Medium: no/blank disc
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
INTR: Assigning IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 1 to local APIC 0
INTR: Assigning IRQ 3 to local APIC 1
ioapic0: Assigning ISA IRQ 3 to local APIC 1
INTR: Assigning IRQ 9 to local APIC 0
ioapic0: Assigning ISA IRQ 9 to local APIC 0
INTR: Assigning IRQ 12 to local APIC 1
ioapic0: Assigning ISA IRQ 12 to local APIC 1
INTR: Assigning IRQ 14 to local APIC 0
ioapic0: Assigning ISA IRQ 14 to local APIC 0
INTR: Assigning IRQ 15 to local APIC 1
ioapic0: Assigning ISA IRQ 15 to local APIC 1
INTR: Assigning IRQ 16 to local APIC 0
ioapic0: Assigning PCI IRQ 16 to local APIC 0
INTR: Assigning IRQ 18 to local APIC 1
ioapic0: Assigning PCI IRQ 18 to local APIC 1
INTR: Assigning IRQ 19 to local APIC 0
ioapic0: Assigning PCI IRQ 19 to local APIC 0
INTR: Assigning IRQ 20 to local APIC 1
ioapic0: Assigning PCI IRQ 20 to local APIC 1
INTR: Assigning IRQ 23 to local APIC 0
ioapic0: Assigning PCI IRQ 23 to local APIC 0
Trying to mount root from ufs:/dev/ad0s4a
start_init: trying /sbin/init
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497f260 StartNode 0xc497f260 ReturnNode 0
ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f160), AE_NOT_FOUND
battery0: error fetching current battery status -- AE_NOT_FOUND
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497f260 StartNode 0xc497f260 ReturnNode 0
ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f160), AE_NOT_FOUND
battery0: error fetching current battery status -- AE_NOT_FOUND
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497f260 StartNode 0xc497f260 ReturnNode 0
ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f160), AE_NOT_FOUND
battery0: error fetching current battery status -- AE_NOT_FOUND
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497f260 StartNode 0xc497f260 ReturnNode 0
ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f160), AE_NOT_FOUND
battery0: error fetching current battery status -- AE_NOT_FOUND
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497f260 StartNode 0xc497f260 ReturnNode 0
ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f160), AE_NOT_FOUND
battery0: error fetching current battery status -- AE_NOT_FOUND
ACPI-0448: *** Error: Looking up [Z006] in namespace, AE_NOT_FOUND
SearchNode 0xc497f260 StartNode 0xc497f260 ReturnNode 0
ACPI-0610: *** Error: Method execution failed [\\_SB_.BAT1._BST] (Node 0xc497f160), AE_NOT_FOUND
battery0: error fetching current battery status -- AE_NOT_FOUND
splash: image decoder found: daemon_saver