Re: pcmcia support with no ISA bus?

well, the following is completely untested.  Lemme know if it works.
It is too green to go into the tree as-is, but will (if it works) get
you up and running.  It won't work for anything but a real pci cardbus
bridge (or the wannabe cardbus bridge the ti-1031).  Some ISA based
chips can also do it, but I don't plan on supporting those because
there are too many different ways to do it, it won't work on real ISA
cards, just funky wired chips in laptops, and there's little demand.

this patch should also apply to -stable cleanly.

Warner

Index: pcic.c
===================================================================
RCS file: /home/imp/FreeBSD/CVS/src/sys/pccard/pcic.c,v
retrieving revision 1.176
diff -u -r1.176 pcic.c
--- pcic.c	18 Jul 2002 08:13:45 -0000	1.176
+++ pcic.c	20 Jul 2002 06:42:01 -0000
@@ -232,6 +232,14 @@
 		pcic_putw(sp, reg+2, (sys_addr + (mp->size >> 12) - 1) & 0xFFF);
 		pcic_putw(sp, reg+4, ((mp->card >> 12) - sys_addr) & 0x3FFF);
 		/*
+		 * Speical kludge for those users that need somewhere out of
+		 * the ISA window for their mapping who are using a cardbus
+		 * bridge.  This will fail for those folks not using a yenta
+		 * bridge. XXX cleanup XXX
+		 */
+		if ((mp->start >> 24) != 0)
+		    sp->putb(sp, 0x40 + win, mp->start >> 24);
+		/*
 		 *	Each 16 bit register has some flags in the upper bits.
 		 */
 		if (mp->flags & MDF_16BITS)

To Unsubscribe: send mail to [email protected]
with "unsubscribe freebsd-mobile" in the body of the message