Re: Route #3 - USB 802.11 a/b/g

OK, that's interesting, I tried, that, and got this:

ural0: flags=108843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
        inet6 fe80::215:e9ff:fe2d:72c3%ural0 prefixlen 64 scopeid 0x4
        inet 192.168.1.84 netmask 0xffffff00 broadcast 49.49.253.171
        ether 00:15:e9:2d:72:c3
        media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps (OFDM/54Mbps)
        status: no carrier
        ssid mine channel 6
        authmode OPEN privacy ON deftxkey 1 txpowmax 100 protmode CTS
        bintval 100

I've tried replacing wep with wepkey, I've tried weptxkey 1 to 4, no
luck on any of those.

Any other suggestions?

Thanks,
-Jim


On 10/6/06, Lars Engels <[email protected]> wrote:
> Hi Jim,
>
>
> On Fri, Oct 06, 2006 at 06:30:27PM -0400, Jim Stapleton wrote:
>
> > Anyway, I get this when I try to connect, any ideas on what I should do
> > next?
>
> It depends on what you want to do. In your example, you create an access
> point and try to ping another host. Is that host connected to your
> newly created access point?
>
> > sjss@aragorn 18:12:58 (0) ~ > sudo ifconfig ural0 inet 192.168.1.84
> > netmask 255.255.255.0 ssid my_ssid wepmode on wepkey
> > 0x0123456789ABCDEF0123456789 media OFDM/54Mbps mediaopt hostap up
>
> If you don't want to be an access point but connect to another one,
> invoke ifconfig like this:
>
> # ifconfig ural0 192.168.1.84 ssid your_ssid wep nwkey 0xyourkey weptxkey 1
>
> (you don't need the inet keyword and the netmask if you use a standard
>  netmask)
>
> If that is not what you want to do, forget this message ;-)
>
> Lars
>
>
>
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"