Re: Xircom RBEM56G-100 on Dell Latitude C600

--On Tuesday, July 23, 2002 01:16:51 +0100 Gavin Atkinson 
<[email protected]> wrote:

> On Sun, 21 Jul 2002, Andrzej Kwiatkowski wrote:
>
>> Can anyone help me ?
>> I've got Dell Latitude C600 Notebook with this PCMCIA Card.
>> But i can't use this card because it isn't recognized by my System.

I am seeing exactly the same on my Compaq Armada M700, plus the previous 
reported problem that any wireless card will crash the kernel.

Product version: 5.0
Product name: Xircom | CardBus Ethernet 10/100 + Modem 56 | CBEM56G | 1.03 
|
Manufacturer ID: 0501030181
Functions: Network Adaptor, Multi-Functioned
Function Extension: 04060010a4e49760
Function Extension: 0102
Function Extension: 0280969800
Function Extension: 0200e1f505
Function Extension: 0301
Function Extension: 0303
Function Extension: 0501
cardbus0: Invalid BAR number: 27(06)
CIS reading done
dc0: <Xircom X3201 10/100BaseTX> port 0x1000-0x107f mem 
0x84000000-0x840000ff,
84000100-0x8400017f irq 11 at device 0.0 on cardbus0
dc0: Ethernet address: 2f:27:21:02:06:00
miibus1: <MII bus> on dc0
tdkphy0: <TDK 78Q2120 media interface> on miibus1
tdkphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
/usr/src/sys/vm/uma_core.c:1332: could sleep with "dc0" locked from 
/usr/src/s
/pci/if_dc.c:609
/usr/src/sys/vm/uma_core.c:1332: could sleep with "dc0" locked from 
/usr/src/s
/pci/if_dc.c:609
/usr/src/sys/vm/uma_core.c:1332: could sleep with "dc0" locked from 
/usr/src/s
/pci/if_dc.c:609
Product version: 5.0
Product name: Xircom | CardBus Ethernet 10/100 + Modem 56 | CBEM56G | 1.03 
|
Manufacturer ID: 0501001081
Functions: Serial Port, Multi-Functioned
Function Extension: 00020f5c
Function Extension: 0206003f1c03030f070001b5
Function Extension: 1306000b000200b5
cardbus0: Invalid BAR number: 27(06)
CIS reading done
cardbus0: <unknown card> (vendor=0x115d, dev=0x0103) at 0.1 irq 11




> As far as I can tell, there are three revisions of this card. Revision 3
> fails to attach, revision 1 works, and I haven't been able to find a
> revision 2 card to test.

I think I have a rev 2 card at home, will check tonight.

> I don't really understand whats going wrong here. Do you have sio in your
> kerenl? This card is listed in src/sys/dev/sio/sio_pci.c on my system, see
> if it is on yours (search for 0103115d in the file)

I do
laptop:~$ dmesg | grep sio
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled

..and I see the same thing.

- kurtis -


To Unsubscribe: send mail to [email protected]
with "unsubscribe freebsd-mobile" in the body of the message