Re: Problems booting FreeBSD on a Compaq Pavillion V6107au

Peter Jeremy <[email protected]>
Newsgroups gmane.os.freebsd.devel.mobile
Message-ID <[email protected]>
On 2007-Mar-24 08:52:05 -0400, John Baldwin <[email protected]> wrote:
>That's because amd64 doesn't do the PnPBIOS stuff.  Can you get boot -v
>dmesg's from amd64 with ACPI on and ACPI off?

Attached is a verbose dmesg with ACPI off.

I'm not sure how to manage a dmesg with ACPI on because it hangs (needs
forced power-off to recover), it doesn't have a serial port and I can't
even reliably scroll back to see what was output.  I have added some
debug printfs and tracked the hang as far as xpt_config().  (I notice
that there are sbp timeouts within the xpt_config with ACPI disabled
and I wonder if these are linked).  I will continue to investigate.

-- 
Peter Jeremy
dmesg_noacpi.txt (text/plain, 21.7 KB)
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 08:32:24 UTC 2007
    [email protected]:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80a53000.
Calibrating clock(s) ... i8254 clock: 1193242 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1607326431 Hz
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-50 (1607.33-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40f82  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
  AMD Features2=0x1f<LAHF,CMP,<b2>,<b3>,CR8>
    HTT bit cleared - FreeBSD does not have licensing issues requiring it.

  Cores per package: 2
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory  = 502267904 (479 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009cfff, 638976 bytes (156 pages)
0x0000000000b50000 - 0x000000001d0b2fff, 475410432 bytes (116067 pages)
avail memory = 472494080 (450 MB)
wlan: <802.11 Link Layer>
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
io: <I/O>
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
rr232x: RocketRAID 232x controller driver v1.02 (Jan 12 2007 08:30:39)
cpu0 on motherboard
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80007004
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=050000] [hdr=80] is there (id=02f010de)
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found->	vendor=0x10de, dev=0x02f0, revid=0xa2
	bus=0, slot=0, func=0
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x02fa, revid=0xa2
	bus=0, slot=0, func=1
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0100, statreg=0x4020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x02fe, revid=0xa2
	bus=0, slot=0, func=2
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x02f8, revid=0xa2
	bus=0, slot=0, func=3
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x02f9, revid=0xa2
	bus=0, slot=0, func=4
	class=05-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x02ff, revid=0xa2
	bus=0, slot=0, func=5
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x027f, revid=0xa2
	bus=0, slot=0, func=6
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0100, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x027e, revid=0xa2
	bus=0, slot=0, func=7
	class=05-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0020, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x02fc, revid=0xa1
	bus=0, slot=2, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x02fd, revid=0xa1
	bus=0, slot=3, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x0244, revid=0xa2
	bus=0, slot=5, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type 1, range 32, base b2000000, size 24, enabled
	map[14]: type 3, range 64, base c0000000, size 28, enabled
	map[1c]: type 1, range 64, base b1000000, size 24, enabled
found->	vendor=0x10de, dev=0x0270, revid=0xa2
	bus=0, slot=9, func=0
	class=05-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x10de, dev=0x0260, revid=0xa3
	bus=0, slot=10, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 4, range 32, base 00001d00, size  7, enabled
found->	vendor=0x10de, dev=0x0264, revid=0xa3
	bus=0, slot=10, func=1
	class=0c-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0001, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 00003040, size  6, enabled
	map[24]: type 4, range 32, base 00003000, size  6, enabled
found->	vendor=0x10de, dev=0x0271, revid=0xa3
	bus=0, slot=10, func=3
	class=0b-40-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00a0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=b, irq=10
	map[10]: type 1, range 32, base b0040000, size 18, enabled
found->	vendor=0x10de, dev=0x026d, revid=0xa3
	bus=0, slot=11, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base b0004000, size 12, enabled
found->	vendor=0x10de, dev=0x026e, revid=0xa3
	bus=0, slot=11, func=1
	class=0c-03-20, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=b, irq=7
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base b0005000, size  8, enabled
found->	vendor=0x10de, dev=0x0265, revid=0xf1
	bus=0, slot=13, func=0
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 00003080, size  4, enabled
found->	vendor=0x10de, dev=0x0266, revid=0xf1
	bus=0, slot=14, func=0
	class=01-01-85, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x01 (250 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 4 messages, 64 bit
	map[10]: type 4, range 32, base 000030c0, size  3, enabled
	map[14]: type 4, range 32, base 000030b4, size  2, enabled
	map[18]: type 4, range 32, base 000030b8, size  3, enabled
	map[1c]: type 4, range 32, base 000030b0, size  2, enabled
	map[20]: type 4, range 32, base 00003090, size  4, enabled
	map[24]: type 1, range 32, base b0006000, size 12, memory disabled
found->	vendor=0x10de, dev=0x026f, revid=0xa2
	bus=0, slot=16, func=0
	class=06-04-01, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x02 (500 ns)
found->	vendor=0x10de, dev=0x026c, revid=0xa2
	bus=0, slot=16, func=1
	class=04-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x05 (1250 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit, vector masks
	map[10]: type 1, range 32, base b0000000, size 14, enabled
found->	vendor=0x10de, dev=0x0269, revid=0xa3
	bus=0, slot=20, func=0
	class=06-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x01 (250 ns), maxlat=0x14 (5000 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base b0008000, size 12, enabled
	map[14]: type 4, range 32, base 000030e0, size  3, enabled
found->	vendor=0x1022, dev=0x1100, revid=0x00
	bus=0, slot=24, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1101, revid=0x00
	bus=0, slot=24, func=1
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1102, revid=0x00
	bus=0, slot=24, func=2
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1103, revid=0x00
	bus=0, slot=24, func=3
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0: <memory, RAM> at device 0.0 (no driver attached)
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
pci0: <memory, RAM> at device 0.6 (no driver attached)
pci0: <memory, RAM> at device 0.7 (no driver attached)
pcib1: <PCI-PCI bridge> at device 2.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x4000-0x4fff
pcib1:   memory decode     0xb3000000-0xb31fffff
pcib1:   prefetched decode 0xd0000000-0xd01fffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
pcib2: <PCI-PCI bridge> at device 3.0 on pci0
pcib2:   secondary bus     3
pcib2:   subordinate bus   3
pcib2:   I/O decode        0xf000-0xfff
pcib2:   memory decode     0xb3200000-0xb33fffff
pcib2:   prefetched decode 0xfff00000-0xfffff
pci3: <PCI bus> on pcib2
pci3: physical bus=3
found->	vendor=0x14e4, dev=0x4312, revid=0x01
	bus=3, slot=0, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 1 message
	map[10]: type 1, range 32, base b3200000, size 14, enabled
pcib2: (null) requested memory range 0xb3200000-0xb3203fff: good
pci3: <network> at device 0.0 (no driver attached)
pci0: <display, VGA> at device 5.0 (no driver attached)
pci0: <memory, RAM> at device 9.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x1d00-0x1d7f at device 10.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 10.1 (no driver attached)
pci0: <processor> at device 10.3 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xb0004000-0xb0004fff irq 11 at device 11.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb0004000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 8 ports with 8 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xb0005000-0xb00050ff irq 7 at device 11.1 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xb0005000
ehci0: [GIANT-LOCKED]
usb1: waiting for BIOS to give up control
usb1: timed out waiting for BIOS
usb1: EHCI version 1.0
usb1: companion controller, 8 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 8 ports with 8 removable, self powered
atapci0: <nVidia nForce MCP51 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3080-0x308f at device 13.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x3080
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: [MPSAFE]
atapci1: <nVidia nForce MCP51 SATA300 controller> port 0x30c0-0x30c7,0x30b4-0x30b7,0x30b8-0x30bf,0x30b0-0x30b3,0x3090-0x309f mem 0xb0006000-0xb0006fff irq 5 at device 14.0 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x3090
atapci1: [MPSAFE]
atapci1: Reserved 0x1000 bytes for rid 0x24 type 3 at 0xb0006000
ata2: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x30c0
atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0x30b4
ata2: SATA connect ready time=0ms
ata2: sata_connect devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x30b8
atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0x30b0
ata3: SATA connect status=00000000
ata3: [MPSAFE]
pcib3: <PCI-PCI bridge> at device 16.0 on pci0
pcib3:   secondary bus     7
pcib3:   subordinate bus   7
pcib3:   I/O decode        0xf000-0xfff
pcib3:   memory decode     0xb3400000-0xb34fffff
pcib3:   prefetched decode 0xfff00000-0xfffff
pcib3:   Subtractively decoded bridge.
pci7: <PCI bus> on pcib3
pci7: physical bus=7
found->	vendor=0x1180, dev=0x0832, revid=0x00
	bus=7, slot=5, func=0
	class=0c-00-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base b3400000, size 11, enabled
pcib3: (null) requested memory range 0xb3400000-0xb34007ff: good
found->	vendor=0x1180, dev=0x0822, revid=0x19
	bus=7, slot=5, func=1
	class=08-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base b3400800, size  8, enabled
pcib3: (null) requested memory range 0xb3400800-0xb34008ff: good
found->	vendor=0x1180, dev=0x0843, revid=0x01
	bus=7, slot=5, func=2
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base b3400c00, size  8, enabled
pcib3: (null) requested memory range 0xb3400c00-0xb3400cff: good
found->	vendor=0x1180, dev=0x0592, revid=0x0a
	bus=7, slot=5, func=3
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0102, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base b3401000, size  8, enabled
pcib3: (null) requested memory range 0xb3401000-0xb34010ff: good
found->	vendor=0x1180, dev=0x0852, revid=0x05
	bus=7, slot=5, func=4
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0102, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base b3401400, size  8, enabled
pcib3: (null) requested memory range 0xb3401400-0xb34014ff: good
fwohci0: vendor=1180, dev=832
fwohci0: vendor=1180, dev=832
fwohci0: <1394 Open Host Controller Interface> mem 0xb3400000-0xb34007ff irq 11 at device 5.0 on pci7
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xb3400000
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:9f:c0:00:df:48:ba:00
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:9f:c0:48:ba:00
fwe0: bpf attached
fwe0: Ethernet address: 02:9f:c0:48:ba:00
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci7: <base peripheral> at device 5.1 (no driver attached)
pci7: <base peripheral> at device 5.2 (no driver attached)
pci7: <base peripheral> at device 5.3 (no driver attached)
pci7: <base peripheral> at device 5.4 (no driver attached)
pci0: <multimedia> at device 16.1 (no driver attached)
nve0: <NVIDIA nForce MCP13 Networking Adapter> port 0x30e0-0x30e7 mem 0xb0008000-0xb0008fff irq 10 at device 20.0 on pci0
nve0: nvenetlib.o version 1.0-13
nve0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xb0008000
nve0: Ethernet address 00:16:36:8f:2b:61
miibus0: <MII bus> on nve0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
nve0: bpf attached
nve0: Ethernet address: 00:16:36:8f:2b:61
nve0: [MPSAFE]
ex_isa_identify()
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xcf800-0xd0fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x1 0x1 0x1 0x1
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
linprocfs registered
Timecounter "TSC" frequency 1607326431 Hz quality 800
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
rr232x: no controller detected.
ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
acd0: setting PIO4 on nForce MCP51 chip
acd0: <MATSHITADVD-RAM UJ-850S/1.05> DVDR drive at ata0 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ad4: 76319MB <Seagate ST98823AS 7.24> at ata2-master SATA150
ad4: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: nVidia check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/ad4s3a
start_init: trying /sbin/init
signature.asc (application/pgp-signature, 187 B)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (FreeBSD)

iD8DBQFGBkAF/opHv/APuIcRAqjWAKCZ/mGb0+iN1AaXyUeJVaLwDU/7bQCffA30
EPA7xfmrjjR7Ys69yb8Jv6g=
=hPW9
-----END PGP SIGNATURE-----
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.