Re: ath 802.11g throughput in 6.2-RELEASE
"Sepherosa Ziehau" <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
On 5/17/07, Kernel Jake <[email protected]> wrote: > % ifconfig ath0 > ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > inet 192.168.1.55 netmask 0xffffff00 broadcast 192.168.1.255 > inet 192.168.1.54 netmask 0xffffffff broadcast 192.168.1.54 > ether 00:11:95:92:72:55 > media: IEEE 802.11 Wireless Ethernet autoselect mode 11g (DS/11Mbps) You mentioned you were using Sample, then the TX rate shown by ifconfig is for packets whose size are <= 250 bytes. Please use netperf or iperf to do some real measure instead of reading the output of ifconfig. BTW, higher TX rate does not necessarily mean you will have better TX performance. Best Regards, sephe -- Live Free or Die _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "[email protected]"