Re: wifi-connection getting dropped ...

Ian Smith <[email protected]> wrote:
!On Sat, 19 May 2007, Kiffin Gish wrote:
! > > From: Dr. Gary E. RAFE [mailto:[email protected]] 
! > > Sent: Monday, May 14, 2007 3:50 PM
! > > Kiffin Gish <[email protected]> wrote:
! > > !Since upgrading to FreeBSD 6.2 and installing another 
! > > wireless adsl !router, I've been having problems with my 
! > > wifi-connection getting !dropped regularly, for example when 
! > > idle for a given amount of time. ! !Here are my settings: ! 
! > > !# ifconfig wi0
! > > !wi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
! > > !        inet 192.168.1.102 netmask 0xffffff00 broadcast 192.168.1.255
! > > !        ether 00:02:2d:a5:1b:07
! > > !        media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps)
! > > !        status: associated
! > > !        ssid SpeedTouchABF160 channel 1 bssid 00:14:7f:8a:74:e3
! > > !        stationname "FreeBSD WaveLAN/IEEE node"
! > > !        authmode OPEN privacy MIXED deftxkey 1 wepkey 
! > > 1:40-bit txpowmax
! > > !100
! > > !        bmiss 7 bintval 100
! > > !
! > > !Any ideas what is going wrong and how it can be fixed?
! > > 
! > > What is the *specific* sympton you see here ?
! > 
! > When the connection breaks, ifconfig gives same results as above except that
! > the inet line is completely missing!
!
!It's not clear whether the connection is 'dropped' at all if it still
!says 'associated' - does it always still report being associated when
!this occurs?
!
!Does anything in /var/log/messages indicate interface wi0 being brought
!DOWN and UP when this happens?  Are you running any scripts or programs
!that might do any other configuration of wi0?
!
!Is 192.168.1.102 a static address, or assigned to you by DHCP?
!
!You've given us few clues about your setup, it's unclear whether you
!control the access point you're connecting to (regarding what people
!have suggested about choosing another channel than 1)
!
!What do 'grep wi0 /etc/rc.conf' and 'dmesg | grep wi0' have to say?
!
! > > We reported back in February the problem of
! > > the second line of your "ifconfig wi0" command output
! > > (i.e., "inet 192.168.1.102 netmask 0xfffff...")
! > > simply disappearing after some random amount of idle time.
! > > 
! > > The wi0 device, however, stays "associated" with the AP,
! > > but the netork doesn't work anymore.
! > > 
! > > This also with FBSD 6.2-R.
! > > --
! > > Dr Gary E RAFE: drgerlists at gmail dot com
!
!Sounds similar on the face of it .. was that resolved, Gary? 

Yes, now that he notes that the "inet" line is "completely missing!",
it is the *exact* same problem.

And, no, it is not yet resolved.
The last time I had the client's notebook connected to our AP,
it was exhibiting the same problem.
Connected to the wired Ethernet port on device fxp0,
it behaved perfectly.

Cheers --Gary
--
Dr Gary E RAFE: drgerlists at gmail dot com
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"