Re: kernel panic with pccard insert on recent 7.0 CURRENT

Warner Losh wrote this message on Sat, Jun 16, 2007 at 17:33 -0600:
> Also, I'm unclear on the difference between FILTER_STRAY and
> FILTER_HANDLED.

The interrupt filter is suppose to return one of FILTER_STRAY or
FILTER_HANDLED...  If you _HANDLED it return that, otherwise return
_STRAY...  If you need to schedule the ithread, return _HANDLED or'd
with _SCHEDULE_THREAD...

I thought piso fixed the comments, but apparently he hasn't (or hasn't
finished committing the patch that includes the comment fixes)...  The
comments in bus.h are incorrect...

> In message: <[email protected]>
>             "Hidetoshi Shimokawa" <[email protected]> writes:
> : I think the following patch fix the problem.
> : 
> : RCS file: /home/ncvs/src/sys/dev/pccard/pccard.c,v
> : retrieving revision 1.118
> : diff -u -r1.118 pccard.c
> : --- pccard.c    31 May 2007 19:29:20 -0000      1.118
> : +++ pccard.c    16 Jun 2007 12:23:35 -0000
> : @@ -1238,7 +1238,7 @@
> :         if (pf->intr_filter != NULL || pf->intr_handler != NULL)
> :                 panic("Only one interrupt handler per function allowed");
> :         err = bus_generic_setup_intr(dev, child, irq, flags, pccard_filter,
> : -           pccard_intr, pf, cookiep);
> : +           intr ? pccard_intr : NULL, pf, cookiep);
> :         if (err != 0)
> :                 return (err);
> :         pf->intr_filter = filt;
> : 
> : 
> : On 6/16/07, ?????? <[email protected]> wrote:
> : > hi, lists
> : > i always get Fatal trap while insert a pccard with recent 7.0 current.
> : > It seems that Can't recognize the pccard address?
> : > thanks with any reply.
> : >
> : > pccard0:Allocation failed for cfe 13
> : > pccard0:Allocation failed for cfe 21
> : > uart0: <Bora Telecom Inc Bora 3600 Rev 1.1> at port 0x3e8-0x3ef irq 11
> : > function 0 config 29 on pccard0
> : > uart0:[FILTER]
> : >
> : > Fatal trap 12: page fault while in kernel mode
> : > cpuid = 0; apic id = 00
> : > fault virtual address = 0x0
> : > fault code = supervisor read, page not present
> : > instruction pointer = 0x20:0x0
> : > stack pointer = 0x28:0xe2996cb0
> : > frame pointer = 0x28:0xe2996cb8
> : > code segment = base 0x0, limit 0xfffff, type 0x1b
> : > = DPL 0, pres 1, def32 1, gran 1
> : > processor eflags = interrupt enable, resume, IOPL = 0
> : > current process = 21 (irq11: cbb0 cbb1+*)
> : > [thread pid 21 tid 100013 ]
> : > Stopped at 0: *** error reading from address 0 ***
> : > db>bt
> : > Tracing pid 21 tid 100013 td 0xc3f05c00
> : > pccard_intr(c4285e00) at pccard_intr+0x12
> : > cbb_func_intr(c4103140,0,c0a493ae,40b,c3f00064,...) at cbb_func_intr|0x51
> : > ithread_loop(c404fab0,e2996d38,83fb5be8,ff06fc46,c3f4b804,...) at
> : > ithread_loop+0
> : > x1b5
> : > fork_exit(c074ccd0,c404fab0,e2996d38) at fork_exit+0x57
> : > fork_trampoline() at fork_trampoline+0x8
> : > --- trap 0, eip = 0, esp = 0xe2996d70, ebp = 0 ---

-- 
  John-Mark Gurney				Voice: +1 415 225 5579

     "All that I will do, has been done, All that I have, has not."
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"