Re: unable to map IRQ for my pccard
"M. Warner Losh" <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
In message: <[email protected]> Zhang Weiwu <[email protected]> writes: : On Tue, 2007-07-10 at 15:18 -0400, John Baldwin wrote: : > On Sunday 08 July 2007 08:54:40 pm Zhang Weiwu wrote: : > > > > cbb0: <TI1250 PCI-CardBus Bridge> mem 0x20822000-0x20822fff at : > > > > device 2.0 on pci0 pccard0: <16-bit PCCard bus> on cbb0 : > > > > cbb1: <TI1250 PCI-CardBus Bridge> mem 0x20821000-0x20821fff at : > > > > device 2.1 on pci0 pccard1: <16-bit PCCard bus> on cbb1 : > > > > $PIR: ROUTE_INTERRUPT failed. : > > > > cbb: Unable to map IRQ... : > > > > device_attach: cbb1 attach returned 12 : > : > We tried to set the IRQ for your device and the BIOS choked. Can you get the : > output from /usr/src/tools/tools/pirtool for your machine? : : : Thanks! Here is it: : : PCI Interrupt Routing Table at 0x000FB270 : ----------------------------------------- : 0x00: Signature: $PIR : 0x04: Version: 1.0 : 0x06: Size: 96 bytes (4 entries) : 0x08: Device: 0:6:0 : 0x0a: PCI Exclusive IRQs: 0x00000400 : 0x0c: Compatible with: 0x00000000 unknown chipset : 0x10: Miniport Data: 0x00000000 : 0x1f: Checksum: 0x4D : : Entry 0: Device 0:6:0 Slot 0 (on-board) : INTA: 60h routable irqs: 3 4 5 6 7 9 10 11 12 14 15 : INTB: 00h (not connected) : INTC: 00h (not connected) : INTD: 63h routable irqs: 3 4 5 6 7 9 10 11 12 14 15 : Entry 1: Device 0:2:0 Slot 0 (on-board) : INTA: 60h routable irqs: 3 4 5 6 7 9 10 11 12 14 15 : INTB: 61h routable irqs: 3 4 5 6 7 9 10 11 12 14 15 : INTC: 00h (not connected) : INTD: 00h (not connected) : Entry 2: Device 0:3:0 Slot 0 (on-board) : INTA: 60h routable irqs: 3 4 5 6 7 9 10 11 12 14 15 : INTB: 00h (not connected) : INTC: 00h (not connected) : INTD: 00h (not connected) : Entry 3: Device 0:7:0 Slot 0 (on-board) : INTA: 60h routable irqs: 3 4 5 6 7 9 10 11 12 14 15 : INTB: 61h routable irqs: 3 4 5 6 7 9 10 11 12 14 15 : INTC: 00h (not connected) : INTD: 00h (not connected) consider: : cbb0: <TI1250 PCI-CardBus Bridge> mem 0x20822000-0x20822fff at device 2.0 on pci0 : pccard0: <16-bit PCCard bus> on cbb0 : cbb1: <TI1250 PCI-CardBus Bridge> mem 0x20821000-0x20821fff at device 2.1 on pci0 : pccard1: <16-bit PCCard bus> on cbb1 : $PIR: ROUTE_INTERRUPT failed. : cbb: Unable to map IRQ... : Entry 1: Device 0:2:0 Slot 0 (on-board) : INTA: 60h routable irqs: 3 4 5 6 7 9 10 11 12 14 15 : INTB: 61h routable irqs: 3 4 5 6 7 9 10 11 12 14 15 I think we're trying to rotue wire 0x60 twice. The second try seems to be failing. Warner _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "[email protected]"