| Newsgroups |
gmane.os.freebsd.devel.mobile |
| Message-ID |
<[email protected]> |
Thank you for the information I am in the process of
scripting the heavy lifting processes.
Cecil
------- Original Message -------
>From : Norberto Meijome[mailto:[email protected]]
Sent : 10/4/2007 7:44:05 AM
To : [email protected]
Cc : [email protected];
[email protected]
Subject : RE: Re: IBM TP R40 Intel 2100
On Fri, 28 Sep 2007 15:51:55 -0400
"[email protected]" <[email protected]> wrote:
> I have FreeBSD 6.2 on a TP R40 with the Intel 2100
802.11b wireless minicard. I am using the ipw driver
with
> firmware. I can bring the ipw0 up with "ifconfig
ipw0 up", "ifcontrol ipw0 list scan", and "ipwcontrol
-i ipw0 -
> f /boot/firmware/ipw-1.fw". I am not quite sure how
to connect to an Open AP at the library. I would like to
> know how to configure one of the following:
Hi Cecil,
> 1. Configure the Function Key (FK)to turn on and
off the wireless radio.
Do you mean, Fn-F5 (or similar on your laptop ?, mine
is F5). First, u need to
ensure the radio switch is on, if u have one (its
the physical switch @ the front). After that, the
Fn-F5 is only a software switch... doesn't really do
anything.
You can map functionality to the Fn- keys
combinations by having acpi_ibm.ko
loaded, setting dev.acpi_ibm.0.events=1 and using a
custom devd.conf to handle
the messages.
There are emails on this list's archive on how to
achieve that functionality.
(i believe in the 2006-2007 archives) Some of them
were sent by me.
You probably want to have a script being called from
devd. to handle all the
heavy lifting.
> 2. Find an easier way to bring up the interface,
associate to an AP, and pull a DHCP IP address.
script your normal steps, and @ the end call dhclient
ipw0
> 3. How to configure the firewall for added protection.
1) choose your firewall of choice : ipfw, ipf, pf.
2) read on how to configure them. There are several
good guides on how to
configure each , for your needs and others. A general
reference about best
practices to follow when setting up firewalls can't
hurt either.
> 4. Is there a package or port that I can install
that will automate the process.
not that i know of.
good luck,
B
_________________________
{Beto|Norberto|Numard} Meijome
"They never open their mouths without subtracting
from the sum of human
knowledge." Thomas Brackett Reed
I speak for myself, not my employer. Contents may be
hot. Slippery when wet.
Reading disclaimers makes you go blind. Writing them
is worse. You have been
Warned.
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"