Re: PCI Cardreader

Bachilo Dmitry wrote:
> Hello all.
> I always used USB cardreaders and had no problem with it, but now in my 
> notebook I have a cardreader, that appears to be onboard PCI device. And so 
> FreeBSD sees it as this:
> pci6: <memory, flash> at device 4.1 (no driver attached)
> pci6: <base peripheral> at device 4.2 (no driver attached)
> pci6: <memory, flash> at device 4.3 (no driver attached)
> pci6: <memory, flash> at device 4.4 (no driver attached)
>
>
> That's even more odd because three are recognized as flash and one is not.
> pciconf -lv shows this:
>
> none13@pci6:4:1:        class=0x050100 card=0x009f1025 chip=0x05301524 
> rev=0x01 hdr=0x00
>     vendor     = 'ENE Technology Inc'
>     device     = 'PCI Memory Stick Card Reader Controller'
>     class      = memory
>     subclass   = flash
>
> Well, in 7.0-CURRENT it showed all four devices and now in BETA-2 only this 
> one.
>
> Is there any way I can make them work?
>
>   

I have a similar set of (currently do nothing) devices on my HP
Pavillion dv9420us:

none11@pci0:7:5:1:      class=0x080500 card=0x30b7103c chip=0x08221180
rev=0x19 hdr=0x00
    vendor     = 'Ricoh Company, Ltd.'
    device     = 'SD Bus Host Adapter'
    class      = base peripheral
none12@pci0:7:5:2:      class=0x088000 card=0x30b7103c chip=0x08431180
rev=0x01 hdr=0x00
    vendor     = 'Ricoh Company, Ltd.'
    device     = 'unknown Ricoh MMC Host Controller'
    class      = base peripheral
none13@pci0:7:5:3:      class=0x088000 card=0x30b7103c chip=0x05921180
rev=0x0a hdr=0x00
    vendor     = 'Ricoh Company, Ltd.'
    device     = 'unknown Ricoh Memory Stick Host Controller'
    class      = base peripheral
none14@pci0:7:5:4:      class=0x088000 card=0x30b7103c chip=0x08521180
rev=0x05 hdr=0x00
    vendor     = 'Ricoh Company, Ltd.'
    device     = 'unknown Ricoh xD-Picture Card Host Controller'
    class      = base peripheral


_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"