Re: Toshiba 2805-S301 + >5.4-STABLE

> 
> On Mon, 31 Dec 2007, Tuc at T-B-O-H.NET wrote:
> 
>  > 	Has anyone found any tricks to getting a Toshiba
>  > 2805-S301 to run anything later than 5.4-STABLE? It seems
>  > that Xorg needs hal, which needs >= 5.5-RELEASE .
> 
> Since I first cvsup'd my 5.4-R system to RELENG_5 over a year ago it's
> reckoned to be 5.5-STABLE.  sysinstall thinks so too, just checked.
> 
> FreeBSD paqi.nimnet.asn.au 5.5-STABLE FreeBSD 5.5-STABLE #0: Sat Mar  3
> 03:14:13 EST 2007 [email protected]:/usr/obj/usr/src/sys/PAQI5S_3  i386
> 
> I haven't tried upgrading from Xorg 6.9 though, can't comment on hal. 
> 
> cheers, Ian
> 
	I boot 5.4, and the kernel continues fine. With 5.5, it stops.. 


Dec 30 12:12:18 gevjon kernel: atapci0: <Intel PIIX4 UDMA33 controller> port 0xf
ff0-0xffff,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 5.1 on pci0
Dec 30 12:12:18 gevjon kernel: atapci0: Reserved 0x10 bytes for rid 0x20 type 4 
at 0xfff0
Dec 30 12:12:18 gevjon kernel: ata0: channel #0 on atapci0
Dec 30 12:12:18 gevjon kernel: atapci0: Reserved 0x8 bytes for rid 0x10 type 4 a
t 0x1f0
Dec 30 12:12:18 gevjon kernel: atapci0: Reserved 0x1 bytes for rid 0x14 type 4 a
t 0x3f6
Dec 30 12:12:18 gevjon kernel: ata0: reset tp1 mask=03 ostat0=50 ostat1=00
Dec 30 12:12:18 gevjon kernel: ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
Dec 30 12:12:18 gevjon kernel: ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
Dec 30 12:12:18 gevjon kernel: ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA
_MASTER>
Dec 30 12:12:18 gevjon kernel: ata0: [MPSAFE]
Dec 30 12:12:18 gevjon kernel: ata1: channel #1 on atapci0
Dec 30 12:12:18 gevjon kernel: atapci0: Reserved 0x8 bytes for rid 0x18 type 4 a
t 0x170
Dec 30 12:12:18 gevjon kernel: atapci0: Reserved 0x1 bytes for rid 0x1c type 4 a
t 0x376

         (5.5 FREEZES HERE)

Dec 30 12:12:18 gevjon kernel: ata1: reset tp1 mask=03 ostat0=50 ostat1=00
Dec 30 12:12:18 gevjon kernel: ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
Dec 30 12:12:18 gevjon kernel: ata1-slave:  stat=0x00 err=0x01 lsb=0x14 msb=0xeb
Dec 30 12:12:18 gevjon kernel: ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATA
PI_SLAVE,ATAPI_MASTER>
Dec 30 12:12:18 gevjon kernel: ata1: [MPSAFE]


	Did you put anything special in any boot.loader, or config file?

			Thanks, Tuc
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"