alienware m15x network problem (duplicate sorry)

There seems to have a problem for me to send email to the mailing-list. This is my last try 

Hi I installed FreeBSD 7.0 on my new laptop (Alienware m15x). I currently have no network working. it sees the device (bge0) but does not seems to be able to attach to it.

I tried disabling the acpi first (and safe mode too), but when I do so the boot sequence crashes asking for the mountroot.

I found someone with similar ( I think ) problem with an ACER laptop. He included that into his loader.conf

hint.acpi.0.disabled="1"
hw.pci4.0.INTA.irq="18"

since disabling the acpi is no good for my laptop, I tried to add this to my load.conf

hw.pci8.0.INTA.irq=18

but doesn't seem to work.


here seems to be the interesting part of my dmesg output:

bge0: irq 17 at device 0.0 on pci8
bge0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff).
bge0: couldn't map memory
device_attach: bge0 attach returned 6



here is my dmesg output:

Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 10:35:36 UTC 2008
[email protected]:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU T8100 @ 2.10GHz (2094.17-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Stepping = 6
Features=0xbfebfbff
Features2=0x8e3bd>
AMD Features=0x20100800
AMD Features2=0x1
Cores per package: 2
usable memory = 4280897536 (4082 MB)
avail memory = 4111667200 (3921 MB)
ACPI APIC Table:
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0: Changing APIC ID to 1
ioapic0 irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 10:34:18)
acpi0: on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0:  port 0x1008-0x100b on acpi0
acpi_ec0: port 0x62,0x66 on acpi0
acpi_ec0: warning: EC done before starting event wait
cpu0: on acpi0
est0: on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6174a2206004a22
device_attach: est0 attach returned 6
p4tcc0: on cpu0
cpu1: on acpi0
est1: on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 6174a2206004a22
device_attach: est1 attach returned 6
p4tcc1: on cpu1
pcib0: port 0xcf8-0xcff on acpi0
pci0: on pcib0
pcib1: irq 16 at device 1.0 on pci0
pci1: on pcib1
vgapci0: port 0x2000-0x207f mem 0xce000000-0xceffffff,0xd0000000-0xdfffffff,0xcc000000-0xcdffffff irq 16 at device 0.0 on pci1
uhci0: port 0x1800-0x181f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: on uhci0
usb0: USB revision 1.0
uhub0: on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: port 0x1820-0x183f irq 21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: on uhci1
usb1: USB revision 1.0
uhub1: on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: mem 0xf0604800-0xf0604bff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: on ehci0
usb2: USB revision 2.0
uhub2: on usb2
uhub2: 4 ports with 4 removable, self powered
ugen0: on uhub2
pci0: at device 27.0 (no driver attached)
pcib2: irq 17 at device 28.0 on pci0
pci2: on pcib2
pcib3: irq 18 at device 28.2 on pci0
pci5: on pcib3
fwohci0:  irq 18 at device 0.0 on pci5
fwohci0: 0x1000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff).
fwohci0: Could not map memory
device_attach: fwohci0 attach returned 6
pcib4: irq 19 at device 28.3 on pci0
pci6: on pcib4
pci6: at device 0.0 (no driver attached)
pcib5: irq 17 at device 28.4 on pci0
pci7: on pcib5
pcib6: irq 16 at device 28.5 on pci0
pci8: on pcib6
bge0: irq 17 at device 0.0 on pci8
bge0: 0x10000 bytes of rid 0x10 res 3 failed (0, 0xffffffffffffffff).
bge0: couldn't map memory
device_attach: bge0 attach returned 6
uhci2: port 0x1840-0x185f irq 23 at device 29.0 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: on uhci2
usb3: USB revision 1.0
uhub3: on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: port 0x1860-0x187f irq 19 at device 29.1 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: on uhci3
usb4: USB revision 1.0
uhub4: on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: port 0x1880-0x189f irq 18 at device 29.2 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: on uhci4
usb5: USB revision 1.0
uhub5: on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: mem 0xf0604c00-0xf0604fff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb6: waiting for BIOS to give up control
usb6: timed out waiting for BIOS
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: on ehci1
usb6: USB revision 2.0
uhub6: on usb6
uhub6: 6 ports with 6 removable, self powered
umass0: on uhub6
pcib7: at device 30.0 on pci0
pci10: on pcib7
pci10: at device 9.0 (no driver attached)
pci10: at device 9.1 (no driver attached)
pci10: at device 9.2 (no driver attached)
pci10: at device 9.3 (no driver attached)
isab0: at device 31.0 on pci0
isa0: on isab0
atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18a0-0x18af at device 31.1 on pci0
ata0: on atapci0
ata0: [ITHREAD]
ata1: on atapci0
ata1: [ITHREAD]
atapci1: port 0x18d8-0x18df,0x18cc-0x18cf,0x18d0-0x18d7,0x18c8-0x18cb,0x18e0-0x18ff mem 0xf0604000-0xf06047ff irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
atapci1: AHCI Version 01.10 controller with 3 ports detected
ata2: on atapci1
ata2: [ITHREAD]
ata3: on atapci1
ata3: [ITHREAD]
ata4: on atapci1
ata4: [ITHREAD]
pci0: at device 31.3 (no driver attached)
acpi_acad0: on acpi0
battery0: on acpi0
battery1: on acpi0
acpi_lid0: on acpi0
acpi_button0: on acpi0
acpi_button1: on acpi0
acpi_tz0: on acpi0
atkbdc0: port 0x60,0x64 irq 1 on acpi0
atkbd0: irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
orm0: at iomem 0xe0000-0xe17ff on isa0
ppc0: cannot reserve I/O port range
sc0: at flags 0x100 on isa0
sc0: VGA 
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: on uhub3
kbd2 at ukbd0
ums0: on uhub3
ums0: mouse has no X report
device_attach: ums0 attach returned 6
ums0: on uhub4
ums0: 3 buttons and Z dir.
uhid0: on uhub4
ugen1: on uhub5
Timecounters tick every 1.000 msec
hptrr: no controller detected.
acd0: DVDR at ata0-master UDMA33
ad4: 114473MB at ata2-master SATA300
GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install.
SMP: AP CPU #1 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: Removable Direct Access SCSI-4 device
da0: 40.000MB/s transfers
da0: 495MB (253696 2048 byte sectors: 64H 32S/T 123C)
Trying to mount root from ufs:/dev/ad4s2a

_________________________________________________________________

_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"