Acer 5101 AWLMI

Hi there,

i've got that "crappy" model from Acer mentioned above. "Crappy" because
the Acer 5100 series is famous for broken motherboards, ideally when
you are just 2 month out of the guarantee time.

Anyway, the USB Ports are broken under any OS, EHCI produces just
errors. This machine is running with 7.1-R amd64 smoothy, also acpi for
the battery is working. Below is a dmesg from a kernel built 
with removed ehci/ohci/uhci devices.

What's really annoying is that the synaptics trackpad is hanging after
approx. 3 seconds of moving the mouse pointer (console also in xorg),
moused says in foreground/debug mode nothing. This also occurs under 
OpenBSD 4.4 amd64 and in ubuntu versions prior to 8.10. 
Anyone seen that behaviour before? Or just broken?

The other question: sysctl says S3/S4/S5 states are supported. But when i
invoke them, it says that it's not supported??? Under ubuntu 8.10
hibernate2disk is supported and works out of the box (sorry for mentioning it
;-)

ThX
                                                                 
K.André Braselmann
--
"I have a good reason for finding the system inappropriate 
 for my intended deployment platform"

--- snip dmesg ---

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-RELEASE #0: Sun Feb  8 18:28:05 CET 2009
    [email protected]:/usr/obj/usr/src/sys/TRASHBIN
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Turion(tm) 64 Mobile Technology MK-36 (1995.01-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40fc2  Stepping = 2
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x1d<LAHF,SVM,ExtAPIC,CR8>
usable memory = 2068725760 (1972 MB)
avail memory  = 1996247040 (1903 MB)
ACPI APIC Table: <PTLTD  	 APIC  >
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <ACRSYS ACRPRDCT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, 1000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x9000-0x90ff mem 0xf8000000-0xfbffffff,0xfc000000-0xfc00ffff irq 17 at device 5.0 on pci1
acpi_video0: <ACPI video extension> on vgapci0
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci4: <ACPI PCI bus> on pcib3
pci0: <serial bus, USB> at device 19.0 (no driver attached)
pci0: <serial bus, USB> at device 19.1 (no driver attached)
pci0: <serial bus, USB> at device 19.2 (no driver attached)
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP400 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8420-0x842f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pcm0: <ATI SB450 High Definition Audio Controller> mem 0xfc400000-0xfc403fff irq 16 at device 20.2 on pci0
pcm0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci6: <ACPI PCI bus> on pcib4
rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xfc100000-0xfc1000ff irq 21 at device 1.0 on pci6
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:16:d4:1e:53:06
rl0: [ITHREAD]
ath0: <Atheros 5212> mem 0xfc110000-0xfc11ffff irq 22 at device 2.0 on pci6
ath0: [ITHREAD]
ath0: WARNING: using obsoleted if_watchdog interface
ath0: Ethernet address: 00:16:cf:6d:49:81
ath0: mac 7.8 phy 4.5 radio 5.6
cbb0: <PCI-CardBus Bridge> mem 0xfc101000-0xfc101fff irq 20 at device 4.0 on pci6
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [ITHREAD]
pci6: <memory, flash> at device 4.1 (no driver attached)
pci6: <base peripheral> at device 4.2 (no driver attached)
pci6: <memory, flash> at device 4.3 (no driver attached)
pci6: <memory, flash> at device 4.4 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1995010378 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 114473MB <Hitachi HTS541212H9AT00 HP4OA23C> at ata0-master UDMA100
acd0: DVDR <PHILIPS DVD-RAM SDVD8821/EY01> at ata0-slave UDMA33
pcm0: <HDA Codec: Realtek ALC883>
pcm0: <HDA Driver Revision: 20080420_0052>
Trying to mount root from ufs:/dev/ad0s1a
--- snap dmesg ---
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"