Problem using adhoc mode using the iwn driver.

Eddie Leisure <[email protected]>
Newsgroups gmane.os.freebsd.devel.mobile
Message-ID <[email protected]>
Followed the instructions per 'man iwn'
I'm getting "ifconfig: SIOCIFCREATE2: Operation not supported" when I 
try to create the wlan0 device in adhoc mode.


Environment specific information:
uname -a:
FreeBSD spectre.mss.iss.net 8.0-BETA3 FreeBSD 8.0-BETA3 #0: Sat Aug 22 
02:36:50 UTC 2009     
[email protected]:/usr/obj/usr/src/sys/GENERIC  i386

pciconf:
iwn0@pci0:3:0:0:    class=0x028000 card=0x10108086 chip=0x42308086 
rev=0x61 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Intel Wireless WiFi Link 4965AGN (Intel 4965AGN)'
    class      = network
    bar   [10] = type Memory, range 64, base 0xdf2fe000, size 8192, enabled
    cap 01[c8] = powerspec 3  supports D0 D3  current D0
    cap 05[d0] = MSI supports 1 message, 64 bit enabled with 1 message
    cap 10[e0] = PCI-Express 1 endpoint max data 128(128) link x1(x1)

This is what I've done:

spectre# ifconfig iwn0
iwn0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290
    ether 00:21:5c:15:74:6d
    media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
    status: no carrier
spectre# ifconfig wlan create wlandev iwn0 wlanmode adhoc ssid aenet
ifconfig: SIOCIFCREATE2: Operation not supported

If I don't use the 'wlanmode adhoc' option, then it works, but doesn't 
really do what I want.

spectre# ifconfig wlan create wlandev iwn0 ssid aenet
wlan0
spectre# ifconfig wlan0 up
spectre# ifconfig wlan0
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
    ether 00:21:5c:15:74:6d
    inet 192.168.2.25 netmask 0xffffff00 broadcast 192.168.2.255
    media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
    status: no carrier
    ssid aenet channel 36 (5180 Mhz 11a)
    country US authmode OPEN privacy OFF txpower 15 bmiss 10 mcastrate 6
    mgmtrate 6 scanvalid 60 wme bintval 0

At this point, I can give it an IP address, etc... but it will say no 
carrier.

This is my first time setting up an adhoc network, but what I can find 
from my searches is that this _should_ work...  I feel like I may be 
missing something simple though.

Any insight would be appreciated.

Ed Leisure


_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.