Re: Thinkpad T510: LAN? CPU-C3?

On Sun, Apr 25, 2010 at 12:33:50PM +0200, Pawel Jakub Dawidek wrote:
> On Mon, Mar 29, 2010 at 12:21:18PM +0200, Jan Henrik Sylvester wrote:
> > I would like to use FreeBSD on a Thinkpad T510. I installed 8-STABLE 
> > (since iwn got 6000 support after 8.0-RELEASE).
> 
> I'm just migrating to T510 too (I'm running 9-CURRENT/amd64)...
> 
> > *** Not working: (Any ideas?)
> > 
> > - LAN: The Intel ethernet card (class=0x020000 card=0x215317aa 
> > chip=0x10ea8086 rev=0x06 hdr=0x00) is not working.
> 
> I can confirm that em(4) works fine with this card in CURRENT.
> 
> > *** Working:
> > 
> > - Graphics (nvidia): The proprietary nvidia driver works well.
> 
> Also with amd64. FINALLY!
> 
> > - Sound (snd_hda): With hw.snd.default_unit=5, I got sound. The first 4 
> > pcm devices are NVidia/DisplayPort, after that there are 2 "HDA 
> > Conexant" with the second one playing sound.
> 
> I had no luck with sound. I got the same hardware:
> 
> # pciconf -lv | grep -A3 ^hda
> hdac0@pci0:0:27:0:      class=0x040300 card=0x215e17aa chip=0x3b568086 rev=0x06 hdr=0x00
>     vendor     = 'Intel Corporation'
>     class      = multimedia
>     subclass   = HDA
> --
> hdac1@pci0:1:0:1:       class=0x040300 card=0x218f17aa chip=0x0be310de rev=0xa1 hdr=0x00
>     vendor     = 'NVIDIA Corporation'
>     class      = multimedia
>     subclass   = HDA
> 
> hdac0: <Intel PCH High Definition Audio Controller> mem 0xf2420000-0xf2423fff irq 17 at device 27.0 on pci0
> hdac0: HDA Driver Revision: 20100226_0142
> hdac0: [ITHREAD]
> hdac0: HDA Codec #0: Conexant (Unknown)
> hdac1: <NVidia (Unknown) High Definition Audio Controller> mem 0xcdefc000-0xcdefffff irq 16 at device 0.1 on pci1
> hdac1: HDA Driver Revision: 20100226_0142
> hdac1: [ITHREAD]
> hdac1: HDA Codec #0: NVidia (Unknown)
> hdac1: HDA Codec #1: NVidia (Unknown)
> hdac1: HDA Codec #2: NVidia (Unknown)
> hdac1: HDA Codec #3: NVidia (Unknown)
> pcm0: <HDA Conexant (Unknown) PCM #0 Analog> at cad 0 nid 1 on hdac0
> pcm1: <HDA Conexant (Unknown) PCM #1 Analog> at cad 0 nid 1 on hdac0
> pcm2: <HDA NVidia (Unknown) PCM #0 DisplayPort> at cad 0 nid 1 on hdac1
> pcm3: <HDA NVidia (Unknown) PCM #0 DisplayPort> at cad 1 nid 1 on hdac1
> pcm4: <HDA NVidia (Unknown) PCM #0 DisplayPort> at cad 2 nid 1 on hdac1
> pcm5: <HDA NVidia (Unknown) PCM #0 DisplayPort> at cad 3 nid 1 on hdac1
> 
> There is no sound. When I set hw.snd.default_unit to 5 there is also no
> sound, but mplayer is running very, very slowly. Adding '-ao null' makes
> video to run as normal.

hdac order in my laptop is different, so what I needed to do was to set
hw.snd.default_unit to 1. The system paniced after some time of playing,
but I had to chance to see what was exact reason.

-- 
Pawel Jakub Dawidek                       http://www.wheelsystems.com
[email protected]                           http://www.FreeBSD.org
FreeBSD committer                         Am I Evil? Yes, I Am!

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (FreeBSD)

iEYEARECAAYFAkvVZgkACgkQForvXbEpPzTUNgCeJqIm1caMDDoACoXlzQHElrMK
Lh4AoKQp0UECQmVsQDmPpTzeZiI9JcSp
=OW2B
-----END PGP SIGNATURE-----