Re: please (re) test AR9220/AR9280 if_ath in -HEAD
Adrian Chadd <[email protected]>
| Newsgroups | gmane.os.freebsd.current,gmane.os.freebsd.devel.mobile,gmane.os.freebsd.devel.net |
|---|---|
| Message-ID | <[email protected]> |
Hi all again! I've just committed some more fixes to TX power calibration for the AR9220 and AR9280. I -think- I have all of the radio setup correct now for the AR5416, AR9160, AR9220 and AR9280. If you're using any of these, especially if you're using the AR9220/AR9280 (and doubly so oif you're using the Ubiquiti SR71-12 or SR71-15) then I'd really appreciate if you did some testing and got back to me. I specifically want to ensure that there's no transmission errors in "normal" (ie, not overly noisy) environments. The earlier AR9220/AR9280 code didn't entirely setup the TX calibration right so it's possible there was distortion. This would've showed up as high TX retransmissions and error rates (sysctl dev.ath.0.sample_stats=1 ; then check dmesg.) I'm working on the AR9285/AR2427 right now and yes, there's still issues there with TX calibration. I'll let everyone know when I've made some progress there. Thanks! Adrian _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[email protected]"