Re: acpiconf shows 100%, but laptop switches off

David Demelier <[email protected]>
Newsgroups gmane.os.freebsd.devel.mobile
Message-ID <[email protected]> 
On 30/04/2011 23:55, Anton Shterenlikht wrote:
> On Wed, Apr 27, 2011 at 06:39:27PM -0400, [email protected] wrote:
>> -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: SHA1
>>
>> Hey, I can help with this!
>>
>> laptop batteries die REALLY quickly if you overcharge them for a long time, so, that probably explains why the battery dies after 20 minutes, no idea why acpi isn't being updated with the battery status, however.
>> what chipset does your sound/wireless use? Not the connection, we know it's pcmcia, but what chipset? If you don't know, then just list the brand names.
>
> Below's "pciconf -lv". Could it be here?
> Many thanks for your help.
> Anton
>
> hostb0@pci0:0:0:0:	class=0x060000 card=0x30c2103c chip=0x79101002 rev=0x00 hdr=0x00
>      vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>      device     = 'RS690 Host Bridge'
>      class      = bridge
>      subclass   = HOST-PCI
> pcib1@pci0:0:1:0:	class=0x060400 card=0x30c2103c chip=0x79121002 rev=0x00 hdr=0x01
>      vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>      device     = 'RS690 PCI to PCI Bridge (Internal gfx)'
>      class      = bridge
>      subclass   = PCI-PCI
> pcib2@pci0:0:4:0:	class=0x060400 card=0x30c2103c chip=0x79141002 rev=0x00 hdr=0x01
>      vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>      class      = bridge
>      subclass   = PCI-PCI
> pcib3@pci0:0:5:0:	class=0x060400 card=0x30c2103c chip=0x79151002 rev=0x00 hdr=0x01
>      vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>      class      = bridge
>      subclass   = PCI-PCI
> atapci0@pci0:0:18:0:	class=0x01018f card=0x43801002 chip=0x43801002 rev=0x00 hdr=0x00
>      vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>      device     = 'IXP SB600 Serial ATA Controller'
>      class      = mass storage
>      subclass   = ATA
> ohci0@pci0:0:19:0:	class=0x0c0310 card=0x30c2103c chip=0x43871002 rev=0x00 hdr=0x00
>      vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>      device     = 'IXP SB600 USB Controller (OHCI0)'
>      class      = serial bus
>      subclass   = USB
> ohci1@pci0:0:19:1:	class=0x0c0310 card=0x30c2103c chip=0x43881002 rev=0x00 hdr=0x00
>      vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>      device     = 'IXP SB600 USB Controller (OHCI1)'
>      class      = serial bus
>      subclass   = USB
> ohci2@pci0:0:19:2:	class=0x0c0310 card=0x30c2103c chip=0x43891002 rev=0x00 hdr=0x00
>      vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>      device     = 'IXP SB600 USB Controller (OHCI2)'
>      class      = serial bus
>      subclass   = USB
> ohci3@pci0:0:19:3:	class=0x0c0310 card=0x30c2103c chip=0x438a1002 rev=0x00 hdr=0x00
>      vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>      device     = 'IXP SB600 USB Controller (OHCI3)'
>      class      = serial bus
>      subclass   = USB
> ohci4@pci0:0:19:4:	class=0x0c0310 card=0x30c2103c chip=0x438b1002 rev=0x00 hdr=0x00
>      vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>      device     = 'IXP SB600 USB Controller (OHCI4)'
>      class      = serial bus
>      subclass   = USB
> ehci0@pci0:0:19:5:	class=0x0c0320 card=0x30c2103c chip=0x43861002 rev=0x00 hdr=0x00
>      vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>      device     = 'IXP SB600 USB Controller (EHCI)'
>      class      = serial bus
>      subclass   = USB
> none0@pci0:0:20:0:	class=0x0c0500 card=0x30c2103c chip=0x43851002 rev=0x14 hdr=0x00
>      vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>      device     = 'ATI SMBus (ATI RD600/RS600)'
>      class      = serial bus
>      subclass   = SMBus
> atapci1@pci0:0:20:1:	class=0x010182 card=0x30c2103c chip=0x438c1002 rev=0x00 hdr=0x00
>      vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>      device     = 'ATI RD600/RS600 IDE Controller (RD600/RS600)'
>      class      = mass storage
>      subclass   = ATA
> hdac0@pci0:0:20:2:	class=0x040300 card=0x30c2103c chip=0x43831002 rev=0x00 hdr=0x00
>      vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>      device     = 'IXP SB600 High Definition Audio Controller'
>      class      = multimedia
>      subclass   = HDA
> isab0@pci0:0:20:3:	class=0x060100 card=0x30c2103c chip=0x438d1002 rev=0x00 hdr=0x00
>      vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>      device     = 'IXP SB600 PCI to LPC Bridge'
>      class      = bridge
>      subclass   = PCI-ISA
> pcib4@pci0:0:20:4:	class=0x060401 card=0x00000000 chip=0x43841002 rev=0x00 hdr=0x01
>      vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>      device     = 'IXP SB600 PCI to PCI Bridge'
>      class      = bridge
>      subclass   = PCI-PCI
> hostb1@pci0:0:24:0:	class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
>      vendor     = 'Advanced Micro Devices (AMD)'
>      device     = 'Athlon64/Opteron/Sempron (K8 Family) HyperTransport Technology Configuration'
>      class      = bridge
>      subclass   = HOST-PCI
> hostb2@pci0:0:24:1:	class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
>      vendor     = 'Advanced Micro Devices (AMD)'
>      device     = 'Athlon64/Opteron/Sempron (K8 Family) Address Map'
>      class      = bridge
>      subclass   = HOST-PCI
> hostb3@pci0:0:24:2:	class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
>      vendor     = 'Advanced Micro Devices (AMD)'
>      device     = 'Athlon64/Opteron/Sempron (K8 Family) DRAM Controller'
>      class      = bridge
>      subclass   = HOST-PCI
> hostb4@pci0:0:24:3:	class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
>      vendor     = 'Advanced Micro Devices (AMD)'
>      device     = 'Athlon64/Opteron/Sempron (K8 Family) Miscellaneous Control'
>      class      = bridge
>      subclass   = HOST-PCI
> vgapci0@pci0:1:5:0:	class=0x030000 card=0x30c2103c chip=0x791f1002 rev=0x00 hdr=0x00
>      vendor     = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
>      device     = 'ATI Mobility Radeon x1100 (RS690M)'
>      class      = display
>      subclass   = VGA
> bge0@pci0:16:0:0:	class=0x020000 card=0x30c2103c chip=0x171314e4 rev=0x02 hdr=0x00
>      vendor     = 'Broadcom Corporation'
>      device     = 'Broadcom NetLink (TM) Fast Ethernet (BCM5906m)'
>      class      = network
>      subclass   = ethernet
> cbb0@pci0:2:4:0:	class=0x060700 card=0x30c2103c chip=0x04761180 rev=0xb6 hdr=0x02
>      vendor     = 'Ricoh Co Ltd'
>      device     = 'Ricoh R/RL/5C476(II) (unknown)'
>      class      = bridge
>      subclass   = PCI-CardBus
>
>

You have a Intel HDA sound (as 99% of computers now) can you boot with 
verbose logging and post your dmesg somewhere ?

it seems bge(4) is detected for your broadcom chipset. Did you read the 
handbook to make a wlan(4) device and use it because you can't use 
directly bge(4) to associate your laptop to access points

I ask this because you said (wireless doesn't work so i'm just guessing 
of course)

Cheers,

-- 
David Demelier
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.