Re: powerd to use sysctl to import temps to drop freq to avoid heat crash
Alexander Motin <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <[email protected]> |
On 01/04/12 20:22, Julian H. Stacey wrote:
> Question:
> In your
> dev.cpu.0.freq_levels: 2400/35000 2000/28000 1600/22000 1200/16000 800/14000
> 1st numbers are frequency, what are 2nd numbers after / ?
Relative power consumption under full CPU load.
> Presumably not voltages, as mine have such a wide span :
> dev.cpu.0.freq_levels: 1592/100000 1393/87500 1194/75000 995/62500
> 796/35457 696/31024 597/26592 497/22160 398/17728 298/13296
> 199/8864 99/4432
> (We should send-pr longer text to be produced by
> sysctl -d dev.cpu.0.freq_levels
> dev.cpu.0.freq_levels: CPU frequency levels
> )
For EIST and probably PowerNow! frequencies it is relative power levels.
But for frequencies created by throttling they are incorrect. If you
disable throttling, you should see only "real" value.
> Question
> "It is not recommended to set the system timer tick rate below 250 HZ and"
> Do you mean as shown by
> kern.clockrate: { hz = 1000, tick = 1000,
> Not kern.hz ?
Generally kern.hz, but for freqs below 1000Hz they are equal.
--
Alexander Motin
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"