Re: RealTek 8188CE NDIS panic
Kevin Oberman <[email protected]>
| Newsgroups | gmane.os.freebsd.devel.mobile |
|---|---|
| Message-ID | <CAN6yY1sDdNyYFA7jQ+6_kyEQGQN8x+TCEF_SLK2o6MEgo+rvfA@mail.gmail.com> |
On Tue, Feb 7, 2012 at 8:10 PM, Richard Morse <[email protected]> wrote: > Hi! I'm trying to install FreeBSD on a Lenovo ThinkPad X120e. The wifi card is a RealTek 8188CE, which is not supported by any of the standard drivers. I have tried to use the `ndisgen` utility with the Windows XP driver files, but whenever I try to `kldload` the generated .ko file, I get a kernel panic. > > Does anyone have any suggestions for how I should proceed? I'd really like to use FreeBSD for > this, rather than going over to a Linux variant, but I do need the WiFi to work... There are a few approaches you can take. 1. Wait an hope someone figures out how to get NDIS to work or writes a driver. Probably not a real viable approach for you unless you can pay someone, do it yourself, or someone else decided to do it now. 2. Replace the card with a supported card. I get a Lenovo labeled Intel Centrino Advance-N card at an exorbitant price, but it works with the iwn driver. I have seen the cards from Lenovo repair places at 100-150 USD while a standard card is about 20 USD. 3. Mod your system to accept a standard WiFi card by: a. Installing a patched BIOS (very risky) b. Get a supported card and re-write the PCIID with the Lenovo ID c. Get a supported card and install it in the other mini-PCIe slot (If you don't have a wireless modem in that slot) (Note, the wireless modem is a full height card and the wireless is half-height, so you will need to adapt it in some way. Adapters are available, but may raise the card too much to fit under the keyboard. I thought about fabbing my own, but I don't have access to the tools I'd need. -- R. Kevin Oberman, Network Engineer E-mail: [email protected] _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-mobile To unsubscribe, send any mail to "[email protected]"