Re: 9-stable regression: 'cbb0: Warning: Bus reset timeout'

On Fri, May 25, 2012 at 09:52:15AM -0700, Adrian Chadd wrote:
> To respond to my own mail again:
> 
> * should the cardbus slot peripherals be detached and reattached upon
> resume? Or should it be just suspend/resumed?
> * here's what I see during suspend:
> 
> 
> wlan1: link state changed to DOWN
> [100741]: ieee80211_reset_bss: iv_bss=0xc969e000, new iv_bss=0xc96a5000
> [100480] cbb0: Opening memory:
> [100480] ath1: detached
> pci0:21:0:0: Transition from D0 to D2
> [100480] pci21: failed to set ACPI power state D2 on
> \\_SB_.PCI0.PCI1.CDBS: AE_BAD_PARAMETER
> [100480] vga0: saving 4612 bytes of video state
> [100480] vga0: saving color palette
> [100480] pci0: failed to set ACPI power state D2 on \\_SB_.PCI0.EXP0:
> AE_BAD_PARAMETER
> [100480] pci0: failed to set ACPI power state D2 on \\_SB_.PCI0.EXP1:
> AE_BAD_PARAMETER
> [100480] pci0: failed to set ACPI power state D2 on \\_SB_.PCI0.EXP2:
> AE_BAD_PARAMETER
> [100480] pci0: failed to set ACPI power state D2 on \\_SB_.PCI0.EXP3:
> AE_BAD_PARAMETER
> 
> .. would someone with some ACPI clue please help me figure out how
> broken the ACPI code in my T60 BIOS is? :)

I am also seeing this on my Thinkpad X200 running 10-CURRENT amd64:
pci0: failed to set ACPI power state D2 on \\_SB_.PCI0.EXP0: AE_BAD_PARAMETER
pci0: failed to set ACPI power state D2 on \\_SB_.PCI0.EXP1: AE_BAD_PARAMETER
pci0: failed to set ACPI power state D2 on \\_SB_.PCI0.EXP3: AE_BAD_PARAMETER
CPU0: local APIC error 0x40

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (FreeBSD)

iEYEARECAAYFAk/DfOMACgkQKc512sD3afguwACfYWgJgO20kNRN/6EExJxJKyuU
i5YAniXPp5bBzUluRj+LyyFqDMk6ef2Q
=6SXF
-----END PGP SIGNATURE-----