Re: Two batteries recognized

On Wed, 03 Apr 2013 11:36:35 -0400, Andre Goree <[email protected]> wrote:

> On 04/03/13 05:55, Ian Smith wrote:
>> On Wed, 3 Apr 2013 02:12:15 -0400, Andre Goree wrote:
>>  > For some reason, acpi is recognizing two batteries, though my system  
>> has only
>>  > one.  I've searched Google but haven't really found a way to rectify  
>> this.
>>  > Any ideas?  Here's some information that may help, let me know if  
>> there's
>>  > other things I can provide:
>>  > > [root@dlaptop ~]# sysctl -a | grep battery
>>  > hw.acpi.battery.life: 81
>>  > hw.acpi.battery.time: -1
>>  > hw.acpi.battery.state: 2
>>  > hw.acpi.battery.units: 2
>>  > hw.acpi.battery.info_expire: 5
>>  > dev.battery.0.%desc: ACPI Control Method Battery
>>  > dev.battery.0.%driver: battery
>>  > dev.battery.0.%location: handle=\_SB_.BAT0
>>  > dev.battery.0.%pnpinfo: _HID=PNP0C0A _UID=1
>>  > dev.battery.0.%parent: acpi0
>>  > dev.battery.1.%desc: ACPI Control Method Battery
>>  > dev.battery.1.%driver: battery
>>  > dev.battery.1.%location: handle=\_SB_.BAT1
>>  > dev.battery.1.%pnpinfo: _HID=PNP0C0A _UID=2
>>  > dev.battery.1.%parent: acpi0
>> You don't say what make/model laptop, though your acpiconf suggests some 
>> sort of Dell.  Many laptops have the capacity to add a second battery, 
>> sometimes instead of a CD/DVD or extra hard drive in a bay.  The above 
>> output doesn't indicate that there are two fitted, just the capacity for 
>> managing two in the ACPI/BIOS.
>> 'bat0' and 'bat1' used below are not valid battery descriptors, specify 
>> only '0' or '1'.  Yes, acpiconf(8) should be a lot clearer about that.
>> Specifying any invalid string always gets you info for battery 0, ie is 
>> equivalent to 'acpiconf -i0', which is why the results below are both 
>> the same down to the serial numbers and present charge rate and voltage.
>> If 'acpiconf -i 1' shows other than 'Device not configured' you might 
>> indeed have some issue.
>> cheers, Ian > [root@dlaptop ~]# acpiconf -i bat0
>>  > Design capacity:        5200 mAh
>>  > Last full capacity:     4677 mAh
>>  > Technology:             secondary (rechargeable)
>>  > Design voltage:         11100 mV
>>  > Capacity (warn):        520 mAh
>>  > Capacity (low):         157 mAh
>>  > Low/warn granularity:   52 mAh
>>  > Warn/full granularity:  52 mAh
>>  > Model number:           DELL PT43693
>>  > Serial number:          37449
>>  > Type:                   LION
>>  > OEM info:               Samsung SDI
>>  > State:                  charging
>>  > Remaining capacity:     77%
>>  > Remaining time:         unknown
>>  > Present rate:           2692 mA (33359 mW)
>>  > Present voltage:        12392 mV
>>  > > [root@dlaptop ~]# acpiconf -i bat1
>>  > Design capacity:        5200 mAh
>>  > Last full capacity:     4677 mAh
>>  > Technology:             secondary (rechargeable)
>>  > Design voltage:         11100 mV
>>  > Capacity (warn):        520 mAh
>>  > Capacity (low):         157 mAh
>>  > Low/warn granularity:   52 mAh
>>  > Warn/full granularity:  52 mAh
>>  > Model number:           DELL PT43693
>>  > Serial number:          37449
>>  > Type:                   LION
>>  > OEM info:               Samsung SDI
>>  > State:                  charging
>>  > Remaining capacity:     77%
>>  > Remaining time:         unknown
>>  > Present rate:           2692 mA (33359 mW)
>>  > Present voltage:        12392 mV
>>  > > -- > Andre Goree
>>  > [email protected]
>>
>
> Thanks!  I will check this when I get home (currently slaving at work  
> :P).
>
> The model is a Dell Latitude E6400.
>

Ok, so my [correct] output is below.  Is there a way to disable a  
battery?  It's really more just so I can get the correct output from KDE's  
battery monitor.  It currently recognizes the two batteries, and when I  
have the AC adapter unplugged it shows 50% (I'm assuming because one  
battery is full, the other empty -- or unrecognized -- rather than 100%).

[root@dlaptop ~]# acpiconf -i 1
Design capacity:        0 mAh
Last full capacity:     0 mAh
Technology:             secondary (rechargeable)
Design voltage:         0 mV
Capacity (warn):        0 mAh
Capacity (low):         0 mAh
Low/warn granularity:   0 mAh
Warn/full granularity:  0 mAh
Model number:
Serial number:          0
Type:
OEM info:
State:                  not present
Present voltage:        unknown
[root@dlaptop ~]# acpiconf -i 0
Design capacity:        5200 mAh
Last full capacity:     4677 mAh
Technology:             secondary (rechargeable)
Design voltage:         11100 mV
Capacity (warn):        520 mAh
Capacity (low):         157 mAh
Low/warn granularity:   52 mAh
Warn/full granularity:  52 mAh
Model number:           DELL PT43693
Serial number:          37449
Type:                   LION
OEM info:               Samsung SDI
State:                  high
Remaining capacity:     100%
Remaining time:         unknown
Present rate:           1 mA (12 mW)
Present voltage:        12506 mV




-- 
Andre Goree
[email protected]
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"