Symbol Spectrum24 PC-Card

Hello

I have a problem with my Symbol Spectrum 24 PC-Card

I get this error on boot (or when the card is inserted):

wi0: <WaveLAN/IEEE 802.11> at port 0x280-0x2c7 iomem 0xd4000-0xd43ff irq 
5 flags 0x10000 slot 0 on pccard0
wi0: 802.11 address: 00:a0:f8:90:37:44
wi0: using RF:PRISM2 MAC:HFA3841, Firmware: 1.1 variant 2
wi0: timeout in wi_cmd 0; event status 0
wi0: timeout in wi_cmd 0; event status 0
wi0: wi_cmd: busy bit won't clear.
wi0: wi_cmd: busy bit won't clear.
wi0: wi_cmd: busy bit won't clear.
wi0: init failed
wi0: timeout in wi_seek to fce0/0; last status 8021
wi0: timeout in wi_seek to fc07/0; last status 8021
wi0: timeout in wi_seek to fc81/0; last status 8021
wi0: timeout in wi_seek to fc00/0; last status 8021
wi0: timeout in wi_seek to fc83/0; last status 8021
wi0: timeout in wi_seek to fc84/0; last status 8021
wi0: timeout in wi_seek to fc06/0; last status 8021
wi0: timeout in wi_seek to fc09/0; last status 8021
wi0: timeout in wi_seek to fc0c/0; last status 8021
wi0: timeout in wi_seek to fc04/0; last status 8021
wi0: timeout in wi_seek to fc02/0; last status 8021
wi0: timeout in wi_seek to fc03/0; last status 8021
wi0: timeout in wi_seek to fc0e/0; last status 8021
wi0: timeout in wi_seek to fc01/0; last status 8021
wi0: timeout in wi_seek to fc28/0; last status 8021
wi0: timeout in wi_seek to fc23/0; last status 8021
wi0: timeout in wi_seek to fc24/0; last status 8021
wi0: timeout in wi_seek to fc85/0; last status 8021
wi0: timeout in wi_seek to fc80/0; last status 8021
wi0: wi_cmd: busy bit won't clear.
wi0: wi_cmd: busy bit won't clear.
wi0: failed to allocate 1594 bytes on NIC
wi0: tx buffer allocation failed
wi0: wi_cmd: busy bit won't clear.
wi0: failed to allocate 1594 bytes on NIC
wi0: mgmt. buffer allocation failed
wi0: wi_cmd: busy bit won't clear.

I added my dmesg to this mail and pccard.conf looks like this:

card "Symbol Technologies" "LA4111 Spectrum24 Wireless LAN PC Card"
	config auto "wi" ? 0x10000
	insert /etc/pccard_ether $device start
	remove /etc/pccard_ether $device stop


Thanks in advance

/John