Re: Sort of working sound on Sony VAIO

Jeremy Norris <[email protected]>
Newsgroups gmane.os.freebsd.devel.mobile
Message-ID <[email protected]>
I attached wrong dmesg (wrong machine!). Here is right one.

Jeremy
vaio.boot (text/plain, 19 KB)
> port 0x1840-0x185f at device 29.2 on pci0
pci_cfgintr_search: linked (0) to configured irq 9 at 0:29:1
pci_cfgintr: 0:29 INTC routed to irq 9
uhci2: (New UHCI DeviceId=0x24878086)
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: (0x24878086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ugen0: Sony USB Memory Stick Slot, rev 1.10/1.83, addr 2
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <unknown card> (vendor=0x104c, dev=0x8021) at 2.0
pcic0: <Ricoh RL5C476 PCI-CardBus Bridge> irq 3 at device 5.0 on pci2
pcic0: PCI Memory allocated: 0x44000000
pccard0: <PC Card bus (classic)> on pcic0
pci_cfgintr_search: linked (0) to configured irq 3 at 2:5:0
pci_cfgintr: 2:5 INTB routed to irq 3
pcic1: <Ricoh RL5C476 PCI-CardBus Bridge> irq 3 at device 5.1 on pci2
pcic1: PCI Memory allocated: 0x44001000
pccard1: <PC Card bus (classic)> on pcic1
fxp0: <Intel Pro/100 Ethernet> port 0x4000-0x403f mem 0xd0204000-0xd0204fff irq 9 at device 8.0 on pci2
fxp0: Ethernet address 08:00:46:43:44:2b
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xd0000000-0xd00003ff at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3
pcm0: <Intel 82801CA (ICH3)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 9 at device 31.5 on pci0
pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd8000-0xdbfff,0xdc000-0xdffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
spic0: device model type = 2
spic0: <Sony Programmable I/O Controller> at port 0x10a0-0x10a4 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
IPsec: Initialized Security Association Processing.
ad0: 28615MB <IC25N030ATDA04-0> [58140/16/63] at ata0-master UDMA100
acd0: CD-RW <HL-DT-ST CD-RW/DVD DRIVE GCC-4080N> at ata1-master UDMA33
(noperiph:atapi1:0:-1:-1): Registered SIM for ata1
acd0: unknown CMD (0x12) - ILLEGAL REQUEST asc=0x24 ascq=0x00 error=0x04
Mounting root from ufs:/dev/ad0s1a
cd0 at atapi1 bus 0 target 0 lun 0
cd0: <HL-DT-ST RW/DVD GCC-4080N 0010> Removable CD-ROM SCSI-0 device 
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
pcm0: play interrupt timeout, channel dead
pcm0: play interrupt timeout, channel dead
ums0: Microsoft Microsoft IntelliMouse\M-. Explorer, rev 1.10/1.03, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
fxp0: promiscuous mode enabled
fxp0: promiscuous mode disabled
ums0: at uhub0 port 2 (addr 2) disconnected
ums0: detached
ums0: Microsoft Microsoft IntelliMouse\M-. Explorer, rev 1.10/1.03, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
pcm0: play interrupt timeout, channel dead
pcm0: play interrupt timeout, channel dead
pcm0: play interrupt timeout, channel dead
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped

syncing disks... 9 
done
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #0: Sun Mar 31 12:45:56 CST 2002
    [email protected]:/home/src/sys/compile/VAIO
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1193.11-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536346624 (523776K bytes)
avail memory = 517660672 (505528K bytes)
Preloaded elf kernel "kernel" at 0xc040f000.
Preloaded elf module "radeon.ko" at 0xc040f09c.
Pentium Pro MTRR support enabled
Using $PIR table, 9 entries at 0xc00fdf30
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82830 host to AGP bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=3576)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
drm0: <ATI Radeon LY Mobility 6 (AGP)> port 0x3000-0x30ff mem 0xd0100000-0xd010ffff,0xd8000000-0xdfffffff irq 9 at device 0.0 on pci1
info: [drm] AGP at 0xe0000000 256MB
info: [drm] Initialized radeon 1.1.1 20010405 on minor 0
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 9 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Microsoft Microsoft IntelliMouse\M-. Explorer, rev 1.10/1.03, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 9 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f at device 29.2 on pci0
pci_cfgintr_search: linked (0) to configured irq 9 at 0:29:1
pci_cfgintr: 0:29 INTC routed to irq 9
uhci2: (New UHCI DeviceId=0x24878086)
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: (0x24878086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ugen0: Sony USB Memory Stick Slot, rev 1.10/1.83, addr 2
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <unknown card> (vendor=0x104c, dev=0x8021) at 2.0
pcic0: <Ricoh RL5C476 PCI-CardBus Bridge> irq 3 at device 5.0 on pci2
pcic0: PCI Memory allocated: 0x44000000
pccard0: <PC Card bus (classic)> on pcic0
pci_cfgintr_search: linked (0) to configured irq 3 at 2:5:0
pci_cfgintr: 2:5 INTB routed to irq 3
pcic1: <Ricoh RL5C476 PCI-CardBus Bridge> irq 3 at device 5.1 on pci2
pcic1: PCI Memory allocated: 0x44001000
pccard1: <PC Card bus (classic)> on pcic1
fxp0: <Intel Pro/100 Ethernet> port 0x4000-0x403f mem 0xd0204000-0xd0204fff irq 9 at device 8.0 on pci2
fxp0: Ethernet address 08:00:46:43:44:2b
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xd0000000-0xd00003ff at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3
pcm0: <Intel 82801CA (ICH3)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 9 at device 31.5 on pci0
pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd8000-0xdbfff,0xdc000-0xdffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
spic0: device model type = 2
spic0: <Sony Programmable I/O Controller> at port 0x10a0-0x10a4 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
IPsec: Initialized Security Association Processing.
ad0: 28615MB <IC25N030ATDA04-0> [58140/16/63] at ata0-master UDMA100
acd0: CD-RW <HL-DT-ST CD-RW/DVD DRIVE GCC-4080N> at ata1-master UDMA33
(noperiph:atapi1:0:-1:-1): Registered SIM for ata1
acd0: unknown CMD (0x12) - ILLEGAL REQUEST asc=0x24 ascq=0x00 error=0x04
Mounting root from ufs:/dev/ad0s1a
cd0 at atapi1 bus 0 target 0 lun 0
cd0: <HL-DT-ST RW/DVD GCC-4080N 0010> Removable CD-ROM SCSI-0 device 
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
pcm0: play interrupt timeout, channel dead
pcm0: play interrupt timeout, channel dead
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped

syncing disks... 5 
done
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #0: Sun Mar 31 12:54:23 CST 2002
    [email protected]:/home/src/sys/compile/VAIO
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1193.11-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536346624 (523776K bytes)
avail memory = 517648384 (505516K bytes)
Preloaded elf kernel "kernel" at 0xc0412000.
Preloaded elf module "radeon.ko" at 0xc041209c.
Pentium Pro MTRR support enabled
Using $PIR table, 9 entries at 0xc00fdf30
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82830 host to AGP bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=3576)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
drm0: <ATI Radeon LY Mobility 6 (AGP)> port 0x3000-0x30ff mem 0xd0100000-0xd010ffff,0xd8000000-0xdfffffff irq 9 at device 0.0 on pci1
info: [drm] AGP at 0xe0000000 256MB
info: [drm] Initialized radeon 1.1.1 20010405 on minor 0
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 9 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Microsoft Microsoft IntelliMouse\M-. Explorer, rev 1.10/1.03, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 9 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f at device 29.2 on pci0
pci_cfgintr_search: linked (0) to configured irq 9 at 0:29:1
pci_cfgintr: 0:29 INTC routed to irq 9
uhci2: (New UHCI DeviceId=0x24878086)
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: (0x24878086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ugen0: Sony USB Memory Stick Slot, rev 1.10/1.83, addr 2
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <unknown card> (vendor=0x104c, dev=0x8021) at 2.0
pcic0: <Ricoh RL5C476 PCI-CardBus Bridge> irq 3 at device 5.0 on pci2
pcic0: PCI Memory allocated: 0x44000000
pccard0: <PC Card bus (classic)> on pcic0
pci_cfgintr_search: linked (0) to configured irq 3 at 2:5:0
pci_cfgintr: 2:5 INTB routed to irq 3
pcic1: <Ricoh RL5C476 PCI-CardBus Bridge> irq 3 at device 5.1 on pci2
pcic1: PCI Memory allocated: 0x44001000
pccard1: <PC Card bus (classic)> on pcic1
fxp0: <Intel Pro/100 Ethernet> port 0x4000-0x403f mem 0xd0204000-0xd0204fff irq 9 at device 8.0 on pci2
fxp0: Ethernet address 08:00:46:43:44:2b
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xd0000000-0xd00003ff at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ichsmb0: <SMBus controller> port 0x1880-0x189f at device 31.3 on pci0
pci_cfgintr_search: linked (0) to configured irq 3 at 2:5:0
pci_cfgintr: 0:31 INTB routed to irq 3
pcm0: <Intel 82801CA (ICH3)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 9 at device 31.5 on pci0
pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd8000-0xdbfff,0xdc000-0xdffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
spic0: device model type = 2
spic0: <Sony Programmable I/O Controller> at port 0x10a0-0x10a4 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
IPsec: Initialized Security Association Processing.
ad0: 28615MB <IC25N030ATDA04-0> [58140/16/63] at ata0-master UDMA100
acd0: CD-RW <HL-DT-ST CD-RW/DVD DRIVE GCC-4080N> at ata1-master UDMA33
(noperiph:atapi1:0:-1:-1): Registered SIM for ata1
acd0: unknown CMD (0x12) - ILLEGAL REQUEST asc=0x24 ascq=0x00 error=0x04
Mounting root from ufs:/dev/ad0s1a
cd0 at atapi1 bus 0 target 0 lun 0
cd0: <HL-DT-ST RW/DVD GCC-4080N 0010> Removable CD-ROM SCSI-0 device 
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
pcm0: play interrupt timeout, channel dead
pcm0: play interrupt timeout, channel dead
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped

syncing disks... 4 
done
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #0: Sun Mar 31 13:15:13 CST 2002
    [email protected]:/home/src/sys/compile/VAIO
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1193.11-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536346624 (523776K bytes)
avail memory = 517660672 (505528K bytes)
Preloaded elf kernel "kernel" at 0xc040f000.
Preloaded elf module "radeon.ko" at 0xc040f09c.
Pentium Pro MTRR support enabled
Using $PIR table, 9 entries at 0xc00fdf30
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82830 host to AGP bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=3576)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
drm0: <ATI Radeon LY Mobility 6 (AGP)> port 0x3000-0x30ff mem 0xd0100000-0xd010ffff,0xd8000000-0xdfffffff irq 9 at device 0.0 on pci1
info: [drm] AGP at 0xe0000000 256MB
info: [drm] Initialized radeon 1.1.1 20010405 on minor 0
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 9 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Microsoft Microsoft IntelliMouse\M-. Explorer, rev 1.10/1.03, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 9 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f at device 29.2 on pci0
pci_cfgintr_search: linked (0) to configured irq 9 at 0:29:1
pci_cfgintr: 0:29 INTC routed to irq 9
uhci2: (New UHCI DeviceId=0x24878086)
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: (0x24878086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ugen0: Sony USB Memory Stick Slot, rev 1.10/1.83, addr 2
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
pci2: <unknown card> (vendor=0x104c, dev=0x8021) at 2.0
pcic0: <Ricoh RL5C476 PCI-CardBus Bridge> irq 3 at device 5.0 on pci2
pcic0: PCI Memory allocated: 0x44000000
pccard0: <PC Card bus (classic)> on pcic0
pci_cfgintr_search: linked (0) to configured irq 3 at 2:5:0
pci_cfgintr: 2:5 INTB routed to irq 3
pcic1: <Ricoh RL5C476 PCI-CardBus Bridge> irq 3 at device 5.1 on pci2
pcic1: PCI Memory allocated: 0x44001000
pccard1: <PC Card bus (classic)> on pcic1
fxp0: <Intel Pro/100 Ethernet> port 0x4000-0x403f mem 0xd0204000-0xd0204fff irq 9 at device 8.0 on pci2
fxp0: Ethernet address 08:00:46:43:44:2b
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xd0000000-0xd00003ff at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3
pcm0: <Intel 82801CA (ICH3)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 9 at device 31.5 on pci0
pci0: <unknown card> (vendor=0x8086, dev=0x2486) at 31.6
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd8000-0xdbfff,0xdc000-0xdffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
spic0: device model type = 2
spic0: <Sony Programmable I/O Controller> at port 0x10a0-0x10a4 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
IPsec: Initialized Security Association Processing.
ad0: 28615MB <IC25N030ATDA04-0> [58140/16/63] at ata0-master UDMA100
acd0: CD-RW <HL-DT-ST CD-RW/DVD DRIVE GCC-4080N> at ata1-master UDMA33
(noperiph:atapi1:0:-1:-1): Registered SIM for ata1
acd0: unknown CMD (0x12) - ILLEGAL REQUEST asc=0x24 ascq=0x00 error=0x04
Mounting root from ufs:/dev/ad0s1a
cd0 at atapi1 bus 0 target 0 lun 0
cd0: <HL-DT-ST RW/DVD GCC-4080N 0010> Removable CD-ROM SCSI-0 device 
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.