Re: System-On-Module

Bernd Walter <[email protected]>
Newsgroups gmane.os.freebsd.current,gmane.os.freebsd.devel.arm,gmane.os.freebsd.devel.mobile
Message-ID <[email protected]>
On Wed, Jan 28, 2015 at 12:27:31PM -0700, Ian Lepore wrote:
> On Wed, 2015-01-28 at 19:32 +0100, Bernd Walter wrote:
> > On Wed, Jan 28, 2015 at 06:52:52PM +0900, Lundberg, Johannes wrote:
> > > Hi
> > > 
> > > Of all the low power, high-spec system/computer-on-modules out there which
> > > have best support for FreeBSD?
> > > 
> > > MEN
> > > Variscite
> > > Technologic system
> > > Adlink
> > > etc.
> > > 
> > > What I am looking for is a system with roughly this specs
> > > ARM or x86, 64bit if possible.
> > > 2-4 cores
> > > 1.5-2.0 GHz
> > > 2 GB RAM
> > > ~16 GB Storage
> > > USB 3.0
> > > PCB size about one to two credit cards.
> > 
> > In that range I would go for a Wandboard.
> > They are 1, 2 or 4 core iMX6 32bit with 512M, 1G or 2G RAM.
> > The 4 core has SATA, which to my knowledge we don't support yet.
> > They come with 2 useable SD-card slots - one on the module and one
> > on a carrier board.
> > Clock rate is 1GHz only IIRC and they only have high speed USB, although
> > the newest carrier boards have some super speed wiring for future modules.
> > 
> > TechNexion, the originator of that module system also has some
> > x86 boards - some may fit your requirements, but those are at
> > a higher price and bigger form factor.
> > Tech Nexion also has iMX6 boards similar to the wandboard with
> > different featuresets, but also at a higher price.
> 
> You do get more for that higher price with the Technexion EDM modules,
> namely 1.2ghz chips instead of 1.0, and parts that are industrial and/or
> automotive temperature-rated rather than consumer grade.  On the other
> hand, you generally can't buy Technexion modules one at a time.  Last
> time I checked they were minimum order 10 pieces even from resellers
> like Mouser and Digikey.

Temperature rating - that can easily justify the higher price.

> Another small-board imx6 possibility is the Hummingboard from SolidRun.
> I now have freebsd running on a SolidRun Cubox-i4, so I expect no large
> drama in getting it working on other SolidRun imx6 products.  Gonzo
> ordered a Hummingboard recently, so we should know for sure some time
> soon.

To my knowledge they come in 3 different sizes.
I own the biggest two versions of them.
Completely forgot that the Hummingboard uses modules as well and the
modules are even very small.

-- 
B.Walter <[email protected]> http://www.bwct.de
Modbus/TCP Ethernet I/O Baugruppen, ARM basierte FreeBSD Rechner uvm.
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[email protected]"
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.