Touchpad/trackpad not working

On Aug 11, 2015, at 05:04 PM, Hans Petter Selasky <[email protected]> wrote:

> On 08/11/15 16:40, Anthony Jenkins via freebsd-usb wrote:
>>
>> hid_is_mouse() is failing to tell that your Synaptics USB HID device is
>> a mouse, but /only/ when there's no other USB (HID) device on that USB
>> bus (usbus0). I suspect it has to do with the hid_get_item() warnings
>> about chopping stuff off. I can't tell from the source code for
>> hid_get_item() (a 313-line function) why it's behaving that way, or why
>> a totally different HID device (Logitech mouse) causes it to behave
>> differently for this HID device (Synaptics touchpad). I've added
>> freebsd-usb@ to see if they know what's going on.
>>
>> ajenkins@kubuntu-ajenkins:~/Downloads$ grep usbus0
>> dmesg_with_external_usb.txt
>> usbus0: waiting for BIOS to give up control
>> usbus0 on xhci0
>> random: harvesting attach, 8 bytes (4 bits) from usbus0
>> usbus0: 5.0Gbps Super Speed USB v3.0
>> ugen0.1: <0x8086> at usbus0
>> uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on
>> usbus0
>> Root mount waiting for: usbus2 usbus1 usbus0
>> ugen0.2: <Logitech> at usbus0
>> ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 1> on
>> usbus0
>> Root mount waiting for: usbus0
>> ugen0.3: <Generic> at usbus0
>> Root mount waiting for: usbus0
>> ugen0.4: <vendor 0x06cb> at usbus0
>> ugen0.5: <Chicony Electronics Co.,Ltd.> at usbus0
>> Root mount waiting for: usbus0
>> Root mount waiting for: usbus0
>> [snip]
>> Root mount waiting for: usbus0
>> Root mount waiting for: usbus0
>> ugen0.6: <Unknown> at usbus0 (disconnected)
>> ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 1> on
>> usbus0
>> ums1: <vendor 0x06cb product 0x2970, class 0/0, rev 2.00/0.08, addr
>> 3> on usbus0
>> uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 1> on
>> usbus0
>>
>> What possessed the laptop manufacturer to hang the Synaptics touchpad
>> device off a USB 3.0 controller is beyond me... I have problems booting
>> FreeBSD off USB 3.0 mass storage devices.
>>
>
> Hi,
>
> Does your mouse only fail to work in X-org, or also the console?
>
> Run "usbdump -i usbusX -f Y -s 65536 -vvv" to catch USB events for
> ugenX.Y. That might give some further clues.
>
> If using X.org, do you use hald or devd backend?
>
> --HPS
 
It fails in both X-org and console.
In X, recently I've only been using devd.
When trying to use the command usbdump -i usbus0 -f 3 -s 65536 -vvv on my touchpad (without any external usb receiver connected), nothing happens at all. No left-click, no right-click, nothing. 

However, if I insert an external USB receiver and then reboot the computer, the touchpad works just fine in both console and in X-org.
If I now do the command above, since I've connected the receiver and done the reboot, I get the following output (just note that during the reboot, the address of the touchpad was changed from ugen0.3 to ugen0.4):
https://www.dropbox.com/s/ktj757okcq61ljc/usbdump_i_usbusX_f_Y_s_65536_vvv.txt?dl=0

On Aug 11, 2015, at 05:46 PM, Zoran Kolic <[email protected]> wrote:

> What do you have in device.hints?
>
> Zoran
>
 
/boot/device.hints has the following contents:
hint.fdc.0.at="isa"
hint.fdc.0.port="0x3F0"
hint.fdc.0.irq="6"
hint.fdc.0.drq="2"
hint.fd.0.at="fdc0"
hint.fd.0.drive="0"
hint.fd.1.at="fdc0"
hint.fd.1.drive="1"
hint.atkbdc.0.at="isa"
hint.atkbdc.0.port="0x060"
hint.atkbd.0.at="atkbdc"
hint.atkbd.0.irq="1"
hint.psm.0.at="atkbdc"
hint.psm.0.irq="12"
hint.sc.0.at="isa"
hint.sc.0.flags="0x100"
hint.uart.0.at="isa"
hint.uart.0.port="0x3F8"
hint.uart.0.flags="0x10"
hint.uart.0.irq="4"
hint.uart.1.at="isa"
hint.uart.1.port="0x2F8"
hint.uart.1.irq="3"
hint.ppc.0.at="isa"
hint.ppc.0.irq="7"
hint.atrtc.0.at="isa"
hint.atrtc.0.port="0x70"
hint.atrtc.0.irq="8"
hint.attimer.0.at="isa"
hint.attimer.0.port="0x40"
hint.attimer.0.irq="0"
hint.wbwd.0.at="isa"
hint.acpi_throttle.0.disabled="1"
hint.p4tcc.0.disabled="1"

_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "[email protected]"