Re: Running FreeBSD on the Lenovo Thinkpad T470s (success)

> 
> 
> > On 7. Jan 2018, at 20:43, clutton <[email protected]> wrote:
> > 
> >> On Sat, 2017-12-30 at 15:58 +0100, Michael Gmelin wrote:
> >> Hi,
> > 
> > Running carbon 5th gen I can't call my setup a success. Wireless iwm
> > doesn't support even N and AC is not supported at all. The wifi is much
> > slower then on my old machines. I'm going to replace the wifi card in
> > mean time, any suggestions which one to buy?
> > 
> > Graphics works perfectly. NVMe SSD with OPAL wouldn't allow machine to
> > resume from sleep, sometimes it does after big timeout and writing
> > errors to console, sometime it just reboots.
> > 
> > Thinkpad Thunderbolt Dock Station, here is where things get
> > interesting. If I boot machine connected to dock station, peripheral
> > devices would work, external monitor, keyboard, and mouse. There's no
> > other way I know to make it work. Once detached - it wouldn't see
> > devices again. Booting and THEN attaching - the same, machine wouldn't
> > see devices.
> > 
> > Here is the device being seen (a lot of pcib*):
> > pcib5@pci0:6:0:0:    class=0x060400 card=0x11112222 chip=0x15d38086
> > rev=0x02 hdr=0x01
> >    vendor     = 'Intel Corporation'
> >    device     = 'JHL6540 Thunderbolt 3 Bridge (C step) [Alpine Ridge
> > 4C 2016]'
> >    class      = bridge
> >    subclass   = PCI-PCI
> > 
> > 
> > For me the main concern is Thunderbolt thought, docking station is
> > amazing thing. Any ideas and thought how to make it work would be
> > highly appreciated.
> 
> In my setup, plug/unplug events for display port don't work when docking (usually I'm not using a dock though). This means: Mouse, Keyboard can be plugged/unplugged as many time as I want at any point, while displays connected over display port only work when connected before starting X (and they don't disappear after disconnecting). Note that stopping X seems to fix this (so no reboot required), but I don't have the docking station myself (this is the Ultra Dock Pro or something - the one that connects at the bottom of the laptop).
> 
> Also, in my setup wifi didn't work without adding iwm0 explicitly to cloned interfaces (which isn't something I wouldn't expect I have to do, but in this case I had to).

Did you have a
	wlans_iwm0="wlan0"
in /etc/rc.conf?   
I do not know or see why putting iwm0 in cloned would do much of anything
for a wlan device.

Also note that is wlans as in plural, not wlan_iwm0.  A mistake I
often make from finger memory.

-- 
Rod Grimes                                                 [email protected]
_______________________________________________
[email protected] mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to "[email protected]"